This sliding wooden door hardware kit is made of high-quality steel and is coated with black powder to ensure corrosion resistance and durability. High strength industrial grade tracks and pulleys can easily withstand 300 pounds of load provides a smooth and sturdy rolling performance. We provide step-by-step graphic and text instruction. It is very easy for you to take a reference during the installation. The barn door hardware kit comes with 2 kinds of wall fastener, expansion screws are used for cement walls, ordinary screws are used for wood walls and cabinets, etc. The barn door is operated by sliding rails, which can save more space compared to traditional door opening methods. It is particularly suitable for small units or situations that require maximum space utilization. Fit door width up to 76”;Fit Door Thickness 1-1/4″ 1-3/4″. The height from top of the door to the top of the roller is 6. The gap between door and wall is about 5/8. 1, 3.3ft rail ×2: which is made of carbon steel, provides a smooth and sturdy rolling performance. 2, Spacers×5, used to keep space between the wall and the rail. 3, Rollers×4, made of carbon steel hanger and nylon wheel with ball bearing makes your door moving stably and in low noise. 5, Rotating shaft and all hardware fasteners×1. Customer questions & answers. Q: How much space do i need to keep from ceiling to doorway? A: At least 6. Q:My door is in thickness of 1-3/8, how can i fit it with the existing bolt? A:you can use the 1/5 black shim we put in package for roller bolt, then your door will be fit perfectly. Q:Can i cut my rail to fit my space? A: Yes, Track can be cut into any length to meet your own require.

LTIYITL 3.3FT Bi-Folding Sliding Barn Door Hardware, Smoothly and Quietly-Heav.. [3.3FT for 2 Doors]. 17.48 x 5.59 x 3.7 inches. [EXCELLENT QUALITY]: Bi-folding door kit is made of high quality carbon steel with a matt black finish, ensuring the product is corrosion, water, fire, rust-resistant, durable, and maintains its beauty and longevity for many years. [PRODUCT DETAILS]:3.3FT/40″track, Each door panel should be half the size of the door opening + 50mm (1.97″) and the track should be more than 150 mm (6″) wider than the door opening, thickness: 1.18”-1.58”, leave 6″ from the upper edge of the door to the roof. [PACKAGE INCLUED]: splicing track, 2 J-type pulleys, 1 rotating shaft, 2 anti-jumping discs, 2 door stops, 1 floor rail, all hardware needed for hanging door. Note that there is only hardware, [DOOR NOT INCLUDED]. [QUIET AND STABLE]: The roller part is made of high-quality nylon material, which ensures that the roller slides like butter on the track. There are high-quality spring limiters on both sides of the track to ensure that the door is fully cushioned when it is closed, and the door will not be damaged. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

All of our products comply with strict quality control and advanced technology makes CCJH Sliding Barn Door Hardware more reliable. Material: Carbon Steel Door weight capacity: 3300lbs Sliding Length: 4ft-20ft for your choose The top of the Doors to the ceiling : Min distance is 6.7″ Suitable Door Panel Thickness: 1 1/4″ to 1 7/8 inch. 1Adjustable Roller hanger screws(from 3cm to 5cm), You can adjust the screw to the most suitable thickness for your door 2Rubber accessoriers & Spring door stops, has buffering effect when sliding door, reduce noise. Ackage includes: For Single Door. According to rail holes. 1 hole need 1 set. Roller Bolt: x4. Door Stopper: x2. T-shape Floor Guide: x1. Install Manual: x1. Ackage includes: For Double Door. Roller Bolt: x8. Door Stopper: x4. T-shape Floor Guide: x2. How to choose track length? Track’s length should be. Of door panel’s width (like your door width is 2.5FT/76cm, You will need 5FT/152cm Kit for single door). The length of the track should be four times the width of the door panel. (like your door width is 24”/61cm, You will need 96”/244cm hardware Kit).

[Durability and Weight Capacity]: Solid steel roller hanger and High strength industrial grade flat tracks hold MAX. 330 lbs door, durable for long life, excellent moistureproof and rust-resistant. [Quiet and Smooth Operation]: Super silently nylon wheels which ensures rollers slide smoothly and quietly on the track, makes the door fully cushioned when closed to protect door and keep safety. [Save Space for Small Space]: For space-saving benefit, ccjh folding door hardware kit is great option for both homes, offices, narrow hallways and as well as smaller apartments, blending modern design with rustic appearance. [Easy to Install]: CCJH barn door hardware offers professional instruction and customer service to solve all installation problems in time, needs MIN. 6″ space above the door, fits from 1-3/8″ to 1-3/4 thick door. Well Complete Package: Bi-folding door kit-NO DOORSplicing 36 track, 2x J-shape rollers, rotating shaft, hinges, all hardware needed for folding door kit are included. Note:Rail Size > door opening width +6. CCJH 30″ – 96″ Bi-Folding Sliding Barn Door Hardware Kit for 2 Doors, Slide Smoothly Quietly, Black Track J Shape Roller [No Door Included]. 3ft/36″ Rail for 2 doors kit fit less 17″ wide door, use three bifold hinges to connect two 17 doors. 2.5ft/30″ Rail for 2 doors kit less 14″ wide door. 3ft/36″ Rail for 2 doors kit less 17″ wide door. 3.3ft/40″ Rail for 2 doors kit less 19″ wide door. 3.5ft/42″ Rail for 2 doors kit less 20″ wide door. 4ft/48″ Rail for 2 doors kit less 23″ wide door. 4.3ft/52″ Rail for 2 doors kit less 25″ wide door. 5ft/60″ Rail for 2 doors kit less 29″ wide door. 5.5ft/68″ Rail for 2 doors kit less 32″ wide door. 6ft/72″ Rail for 2 doors kit less 35″ wide door. 6.6ft/80″ Rail for 2 doors kit less 39″ wide door. 8ft/96″ Rail for 2 doors kit less 47″ wide door. We Only Sell Folding Door Kit, Not Sell Door Panel. Rail Size > The Width of Door Opening + 6. Can Support Maximum weight 330 lbs. Fit Door Thickness from 1-3/8″ to 1-3/4″. Need at Least 6 Space Above the Top of the Door. The Gap Between Door and Wall is 2.16 Minus Your Door Thickness. First Choice for Small Space – Save Space. Heavy Duty Construction – Solid Steel. Widely Application – Bedroom, Living Room, Wardrobe, Cabinet etc. Stable and Durable – Anti-corrosion and Rust-resistant. Sliding Smoothly and Quietly – Super Silently Nylon Wheels. Folding Two Doors / Four Doors Comparison.

6Ft Heavy Duty Double Door Sliding Barn Door Hardware Kit – Smoothly and Quietly -Easy to Install -Includes Step-By-Step Installation Instruction Fit 18 Wide Door Panel. 41.18 x 6.22 x 3.78 inches. WHY CHOOSE US? Our track comes in two solid pieces, instead of mutiple small pieces. It’s easier to get level, install and keep straight. As you slide the door it won’t hits the seams so the door can roll smoothly and steadily. EASY TO INSTALL? Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a Carpenter or decoration team. PACKAGE INCLUDED? The picture shows the actual hardware you will receive. DOOR NOT INCLUDED? And we provide you with an accurate list in the Installation instruction. DOOR WEIGHT CAPACITY? Door Weight Limited 220lbs. Fit door panel thickness: 1 3/8″ to 1 3/4″. The door panel width should be at least 2 wider than half of the opening or the opening may not be fully covered. THE BEST CHOICE FOR YOUR HOUSE? This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door. Q: How to ensure the stability and safety of the door? Wo door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close. A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard. Those little round discs- go on top of the door and won’t allow door to be lifted off rail unless they’re turned. Q: When do you need a headboard? If the studs don’t line up with the pre-drilled holes in the rail. If there is a doorway trim. Is greater than 2′. Q: How much space do I need above the doorway? A: You will need a minimum of 6 from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: How thick of a door will this kit work with? A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8″ to 1 3/4″, but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below. Door depth – trim depth. If your answer is 0 or greater, then you’re fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board. 8FT Rail; 2 Floor Guide; 2 Handle (NO DOOR). 8FT Rail; Door Not Included. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

5FT Bi-Folding Sliding Barn Door Hardware, Smoothly and Quietly-Heavy Duty -Simple and Easy to Install for 2 Doors Hardware Kit, Basic”J”[No Door]. [5FT for 2 Doors]. 17.68 x 5.47 x 3.66 inches. [EXCELLENT QUALITY]: Bi-folding door kit is made of high quality carbon steel with a matt black finish, ensuring the product is corrosion, water, fire, rust-resistant, durable, and maintains its beauty and longevity for many years. [PRODUCT DETAILS]:5FT/60″track, Each door panel should be half the size of the door opening + 50mm (1.97″) and the track should be more than 150 mm (6″) wider than the door opening, thickness: 1.18”-1.58”, leave 6″ from the upper edge of the door to the roof. [PACKAGE INCLUED]: splicing track, 2 J-type pulleys, 1 rotating shaft, 2 anti-jumping discs, 2 door stops, 1 floor rail, all hardware needed for hanging door. Note that there is only hardware, [DOOR NOT INCLUDED]. [QUIET AND STABLE]: The roller part is made of high-quality nylon material, which ensures that the roller slides like butter on the track. There are high-quality spring limiters on both sides of the track to ensure that the door is fully cushioned when it is closed, and the door will not be damaged. Q: How to confirm how long the guide rail I need? A: We suggest that you make sure that the opening size of your door is +4″6″. Q: How to confirm the size of my door panel? In order to protect the safety of the products used, we designed L-shaped and U-shaped parts on the sliding roller and the fixed roller respectively to ensure the stability and safety of the roller. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.

6″ space above the door, fits from 1-3/8″ to 1-3/4 thick door. Note:Rail Size > door opening width +6.

THE BEST CHOICE FOR YOUR HOUSE? This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door. It’s easier to get level, install and keep straight.

[Small space first choice]: 5FT=60″track, bi-folding door kit won’t take up too much of your living space, just need to leave more than 6″8 space next to your door opening to meet your needs. Suitable for door thickness:1-3/16″ 1-3/4″, single track load up to 330LBS per door. [Excellent product quality]: BONIKLUBA folding door hardware kit is made of high quality carbon steel, not easy to be bent and deformed, and the pulley part is made of high quality nylon, so that the pulley is as quiet and smooth as butter when sliding over the guide, which is the first choice of strong and durable hardware kit.

CCJH 36 Bi-Folding Sliding Barn Door Hardware Kit for 2 Doors, Slide Smoothly Quietly, Black Track J Shape Roller, No Door. [Durability and Weight Capacity]: Solid steel roller hanger and High strength industrial grade flat tracks hold MAX. 330 lbs door, durable for long life, excellent moistureproof and rust-resistant. [Quiet and Smooth Operation]: Super silently nylon wheels which ensures rollers slide smoothly and quietly on the track, makes the door fully cushioned when closed to protect door and keep safety. [Save Space for Small Space]: For space-saving benefit, ccjh folding door hardware kit is great option for both homes, offices, narrow hallways and as well as smaller apartments, blending modern design with rustic appearance. [Easy to Install]: CCJH barn door hardware offers professional instruction and customer service to solve all installation problems in time, needs MIN. 6″ space above the door, fits from 1-3/8″ to 1-3/4 thick door. Well Complete Package: Bi-folding door kit-NO DOORSplicing 36 track, 2x J-shape rollers, rotating shaft, hinges, all hardware needed for folding door kit are included. Note:Rail Size > door opening width +6. 5.51 inches x 17.63 inches x 3.62 inches. Weight: 7.28 lb. 3ft for 2 Doors. 17.63 x 5.51 x 3.62 inches. 2 rollers, 3ft track.