







DIYHD Ceiling Mount Bypass Pocket Door Sliding Hardware, No Door. Sliding track kit only, Not includes door panel. Hardware only suitable for door thickness:1 3/4″ and 1 3/8″. Max capacity:150lbs each door. Full set hardware includes. 3 Wheel hanger X4. Please do not install stops if you are going to fully open the door panel.

Sliding Hardware Only, Not Including Glass Panel. DIYHD NBSHOWERS Frameless Black Sliding Glass Track barn Shower Door Hardware. Material:Stainless Steel 304. Surface:Satin / Chrome /Black for selection. Sliding track size:5FT / 6.6FT for selection. 3 Surface for selection. Full set hardware including. Rail&fixed glass connector:2pcs. Wall&fixed glass connector:2pcs. Glass hole drawing/sliding tube hole drawing. There’s a floor guide need to be installed under the sliding door panel, Sliding door panel should be 10mm(0.394) shorter than fixed glass panel.














DIYHD Concealed Sliding Barn Door Hardware with Soft Close Mechanism, No Floor Track. Hardware Only, Not Including Door Panel. Wall mount sliding system with invisible track in front;Suitable for wood doors weighing up to 176 lb (80 kg). Suitable for door thickness 1-1/4″1-3/4″. 38″ track fit openning width 30″34. 42″ track fit openning width 34″38. 48″ track fit openning width 40″44. The track can be cut for smaller door panel. Its unique hardware and concealed track create the illusion of a floating door. Full set hardware including. Top rail:1pcs, 38″ / 42″ /48 for selection +Soft close mechanism:2pcs +End cap:2pcs. Top roller:1pcs + Stop 2pcs.

DIYHD White Bifold Sliding Barn Door Rolling Hardware, Front Mount Kit for 2 Doors / 4 Doors, (No Door). Hardware only, Not includes door panel. Max capacity 198lbs;Track pre-drilled 16″ apart holes, fit US standard 16″ apart studs walls. The height from top of the door to the top of the roller is 5 7/8. The gap between door and wall:Door closed:1″1 3/16″;Door opened:1/4″3/8″. DO NOT mount rail onto drywall directly, make sure the screws can be fixed on studs/solid wall. Fit door leaf Width 18″(total 36″). Fit door leaf Width 20″(total 40″). Fit door leaf Width 12″(total 48″). Track length 65″(32-1/2″). Fit door leaf Width 16″(total 64″). Fit door leaf Width 18″(total 72″). Fit door leaf Width 20″(total 80″). Full set hardware includes. Track X1+Track&wall connector X1 set. Bifold rollerX2 + Fixed roller lock bracketX2. 3 Surface for selection.

Material:Aluminium Alloy+Wood cover;Color:Black/White for selection. Product suitable for door panel MAX size:W:44in;H84in. The length can be cut for small door panel. Note:Only sliding hardware for sale, door panel not includes. The kit also suitable for our Aluminum frame glass door panel(TAD01), check item ID:334975429453.









Hardware Only, Not Including Door Panel. 5FT/5.5FT/6FT/6.6FT are 1pcs track. 8FT/10FT are 2pcs short track with a connector. DIYHD Brushed Nickel Steel Bypass Double Sliding barn Door Hardware One Piece Easy Mount Bypass Bracket. Full set hardware including. Track2pcs + Track&Wall Spacer1 set + Bypass bracket1 set. Bypass system require high space(at least 10) from top of the door to the ceiling, pls check your openning space before order. The gap between two doors are 2″ based on the door thickness40mm(1 3/5″), we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/10″;Height 1″), pls let your door maker finish this job when you order the door. How to install bypass bracket. How to install barn door hardware: Step1:(Inner door) Drill holes on the wall H is door panel’s height, H+43MM(1-7/10) is the place we need drill holes for track to tight screws. Step2: Adjust stop’s location, then tight the track on the wall with spacers. Step3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4: The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5: Hang wheels on the track. Step6: Bypass bracket’s waist-shaped hole is on same leve as inner track, so aim the waist hole at inner track’s hole to find 2 upper holes location on the wall. Drill holes on the wall, and tight screws. Step7:Fix outter track on the bypass bracket with spacers. Step8:Hang outter door on the track and tight anti-pad Step9: Install floor guide on the floor under the groove of the door panel.












DIYHD Ceiling Mount Bypass Box Track Sliding Barn Door Hardware. Hardware Only, Not Including Door Panel. The kit can be used for interior door and outside door. Full set kit including. Box track2+Bypass bracket2+End cap2. Installed under ceiling directly. Suitable for door thickness:1 3/8″1 3/4″. Please adjust roller screw’s location to make a bigger gap between 2 doors for thick door. 2 rollers can hold 1 door MAX weight 330lbs. Mainly designed for exterior door. Box track hardware is a little bit. Than interior barn door hardware.









DIYHD Ceiling Mount Bracket Concentric Circle Roller Stainless Steel Sliding barn Wood Door Track Hardware. Only hardware for sale, Door panel is not included. Material:Stainless steel 304. Full set hardware including. Sliding track 1pcs (8FT is 4FT+4FT+track connector). The round part ceiling bracket already pre-fixed on the track to make full system easy for installation. Stainless Steel Ceiling Bracket Sliding barn Wood Track Hardware, Single Door Kit. Ceiling mount bracket barn door track kit mainly suitable for the opening that don’t have enough space to install wall mount track. Pls make sure your ceiling is strong enough to hang door panel Our track had been pre-drilled holes for ceiling bracket. Suitable for door thickness 1 3/8″1 3/4″(35mm-45mm). Two rollers can bear max weight 90kgs. Door height= ceiling height minus 9/16(14mm). The ceiling bracket inner center hole to the wall length is 2-3/8(60mm). Drill holes on the door panelthe length between center hole and the top of the door panel is 1-9/16(40mm).

DIYHD Easy Mount Stainless Steel Glass Sliding Barn Door Interior Partition Door Office Glass Door Sliding Track Kit, No Glass. Sliding Hardware Only, Not Including Glass Panel. Material:Stainless Steel 304. Sliding track size: 5FT / 6FT / 6.6FT /8FT for selection. 2 rollers can bear MAX door weight 180lbs. Suitable for glass thickness:0.39″0.47″. Full set hardware includes. The height from top of glass to the top of roller is 3 7/16. Glass panel requires to be drilled holes for rollers and round knob. This item used U rail holders to install rail on the wall, the location of U holders are adjustable, easy mount for studs wall. The gap between glass and wall is about 9/16. Wooden board required if you have thick baseboard or door frame.

Material:Aluminium Alloy+Wood cover;Color:Black/White for selection. Product suitable for door panel MAX size:W:44in;H84in. The length can be cut for small door panel. Note:Only sliding hardware for sale, door panel not includes. The kit also suitable for our Aluminum frame glass door panel(TAD01), check Item ID:264654653735.