Sliding Door Hardware
Triple Track Bypass Sliding Barn Door Hardware Kit- Inverted Bent Roller Design

THREE-DOOR FULL BYPASS SYSTEM. A true triple bypass, consists of three individual tracks where each door can slide on its own track independently. All three doors are able to overlap 100% and can slide from one end to the other with no limitations or interference. Triple Bypass would give you an immediate thought of “BIG GAP” bypass system, but our upgraded triple bypass system now has minimal spacing between each doors. For example when a standard door thickness (1-3/8in) is used, the gaps between each door will range from 1 to 1-1/2in. The gap between the front face of the outer door and the wall is now about 8in compared to our previous system which was 11in. Now the doors are close to one another, this brings you optimal privacy without the unpleasant gaps. Our bracket has been upgraded therefore finding bracket hole placements and alligning of tracks are no longer needed. The steps for installation has been reduced due to the brackets being mostly pre-assembled. You will also receive a step by step installation manual with U. Standard measurements, simple instructions and informative diagrams. Compared to our double track bypass and our previous triple bypass, this system offers a bigger available opening. For example if our triple bypass is applied in a setup with no available wall space, this hardware provides 2/3 of the opening size once the doors are stacked and pushed to one side. VARIOUS TRACK LENGTHS AND FULL SIZES. While other brands only offer few selected track lengths, we offer anywhere from 4ft up to 20ft. The spacing between each pre-drilled holes on the track is 16in apart to match your studs. Our tracks 7.5ft and shorter all come as one full piece. 8ft and longer will come as two or more pieces joined with a junction plate. Thus the middle section where two tracks join may not be 16in apart. A header board will be required if the holes on the track do not line up with your studs.
6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

W E L C O M E. 6.6 Feet Bypass Sliding Barn Door Hardware Kit – for Double Wooden Doors-Single Track – Smoothly & Quietly – Easy to Install-Fit 67 Opening. WHY CHOOSE US? Our rail is made by 1/4 heavy duty carbon steel, solid inside, frosted black surface. The rail comes in two pieces, instead of mutiple small pieces, the door can roll quietly and smoothly. OVERLAP SPACE? There would be a 8″-12″ overlap space since the 2 doors are hanging on one single rail. The door panel width should be wider than half of the (opening+overlap sapce) or the opening may not be fully covered. EASY TO INSTALL? Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a Carpenter or decoration team. PACKAGE INCLUDED? The picture shows the actual hardware you will receive. DOOR NOT INCLUDED?? HEADBOARD NOT INCLUDED? And we provide you with an accurate list in the Installation instruction. DOOR WEIGHT CAPACITY? Door Weight Limited 220lbs. Fit door panel thickness: 1 3/8″ to 1 3/4″. Q: How to ensure the stability and safety of the door? Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close. A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard. Q: When do you need a headboard? If the studs don’t line up with the pre-drilled holes in the rail. If there is a doorway trim. Q: How much space do I need above the doorway? A: You will need a minimum of 6 from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: How thick of a door will this kit work with? A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8″ to 1 3/4″, but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below. 2”- door depth – trim depth. If your answer is 0 or greater, then you’re fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board. 4.7 out of 5 stars. 4.6 out of 5 stars. 4.5 out of 5 stars. 1 3/8″ to 1 3/4″. 4.9 out of 5 stars. Door included or not. 4.4 out of 5 stars. 5.0 out of 5 stars. Suitable Track Length (ft). 6.6FT Bypass Kit. 57 x 6.5 x 3 inches. 6.5 inches x 57.0 inches x 3.0 inches. Weight: 22.4 lb. We are always working hard to ensure your package arrives as soon as possible.
Triple Track Bypass Sliding Barn Door Hardware Kit-Straight Roller Design

THREE-DOOR FULL BYPASS SYSTEM. A true triple bypass, consists of three individual tracks where each door can slide on its own track independently. All three doors are able to overlap 100% and can slide from one end to the other with no limitations or interference. Triple Bypass would give you an immediate thought of “BIG GAP” bypass system, but our upgraded triple bypass system now has minimal spacing between each doors. For example when a standard door thickness (1-3/8in) is used, the gaps between each door will range from 1 to 1-1/2in. The gap between the front face of the outer door and the wall is now about 8in compared to our previous system which was 11in. Now the doors are close to one another, this brings you optimal privacy without the unpleasant gaps. Our bracket has been upgraded therefore finding bracket hole placements and alligning of tracks are no longer needed. The steps for installation has been reduced due to the brackets being mostly pre-assembled. You will also receive a step by step installation manual with U. Standard measurements, simple instructions and informative diagrams. Compared to our double track bypass and our previous triple bypass, this system offers a bigger available opening. For example if our triple bypass is applied in a setup with no available wall space, this hardware provides 2/3 of the opening size once the doors are stacked and pushed to one side. VARIOUS TRACK LENGTHS AND FULL SIZES. While other brands only offer few selected track lengths, we offer anywhere from 4ft up to 20ft. The spacing between each pre-drilled holes on the track is 16in apart to match your studs. Our tracks 7.5ft and shorter all come as one full piece. 8ft and longer will come as two or more pieces joined with a junction plate. Thus the middle section where two tracks join may not be 16in apart. A header board will be required if the holes on the track do not line up with your studs.
Single Track Bypass Sliding Barn Door Hardware Kit Classic Design Roller

Single Track Bypass Sliding Barn Door Hardware Kit Classic Design Roller

Single Track Bypass Sliding Barn Door Hardware Kit Classic Design Roller

QUALITY IS 100% UNDER CONTROL. We picked the most premium carbon steel to make the hardware heavy-duty and sturdier than the competition. The black powdered coating makes the paint stays forever and will not be scratched off. The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track. Weight up to 220 lbs. FULLY OPTIMIZED CONNECTING AND SPACING. I understand how frustrated it was when you opened the box and found out multiple smaller tracks that were hard to line up and connect. Even worse when the spacing was not exactly 16 inches. We ve got them all figured out! The spacing is now exactly 16 inches. Track 7.5ft and under is only one piece track. Track 8ft and above are connected by two tracks using a junction plate, thus, the spacing between the middle two holes may not be 16 inches. BARN DOOR HARDWARE INSTALLATION MADE EASY. You hate to see vague installation manual that is just one piece of paper with hard to read measurements, badly drawing pictures, and barely any word instructions? Fortunately, in our installation manual, you will see the step by step instructions with USA standard fractional inch measurements, self-explanatory pictures, and concise word instructions. You are going to have a pleasant time while installing a sliding door at your home. Not the case here! We provide track sizes from 4ft to 20ft at a reasonable price. We also improved our packaging to make sure you will get everything you need in a timely manner! No more hassle to go back and forth for the missing or replacement parts. YOU ARE FULLY COVERED BY OUR PROFESSIONAL CUSTOMER SERVICE TEAM. As a company in the US, our professional customer service team are here to ensure your satisfaction with our products and quick response to any questions. Package includes all the hardware kit you need to install a sliding barn door. The barn door hardware can be used both inside and outside. It is rustproof, waterproof, and fireproof. The standard door thickness for our hardware is from 1 3/8” to 1 3/4”. If your door thickness is not within that range, please go to our second tab called “Customization Services” for more detailed instructions on how to customize it. The spacing between each hole is American Standard 16”. Tracks 7.5ft and under are one single track instead of being connected by multiple shorter tracks. Tracks 8ft to 16ft will be connected by two tracks. Tracks 18ft and 20ft will be connected by three tracks. Therefore, the spacing between the holes in the connecting section may not be 16”. The minimum clearance (from top of the door to the ceiling) you need to install this barn door hardware is 5”.
Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

Ju Bypass Sliding Door Hardware 72 Bypass Wardrobe Closet Door Hardware Set Smo

JUBEST Bypass Sliding Door Hardware 72, Aluminum Bypass Wardrobe Closet Door Hardware Set with Finger Pull Included, Smoothly and Quietly, for 2 Door System, Easy to Install. Specifications: Max Door Weight: up to 150lbs (68kg) per panel; Door panel thickness: 1 3/8″ and 1 3/4″; Max Door panel width: 36 1/2″x2doors, track can be cut down to fit custom opening width(track length = 2 x door width -1″). High Quality: Commercial grade precision extruded aluminum box track ensures door will not jump from track, convex rails on track allow flexible and free rolling. Built-in front cover hides the sliding hardware from view. Smoothly and Quietly: Three wheel hangers guarantee all wheels carry door weight equally, with heavy-duty ball-bearing offer minimum friction and smooth, quiet rolling, tested beyond 100,000 rolls. Easy to Install: Quick release locking tab allows easy door installation/removal without dropping track. We also provide step-by-step graphic & text installation parsing manual. Widely Use: This track can be used for any space, living room, kitchen, bedroom, bathroom, laundry room, storage room, closet, study, checkroom, etc. Especially for low clearance. 24 Hours Support: We are reliable and qualified manufacture. Professional customer service team help you solve all problems in time. Please wait for the result of cancellation. The order will be processed and completed by automatic warehouse system within 5 minutes. Sending direct message to cancel the order is not allowed for every case. For the return case.
6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

6.6ft Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit

Skysen 6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Double Door Kit Black(Big Spoke Wheel-1). [Single Track Barn Door Hardware Kit] Condition: New; Material: Carbon Steel(High Standard); Surface: Black Powder Coated(Anti-Rust); Door weight capacity: 265 lbs; Fit door panel width: Up-39.6″; Door Thickness: 1 3/8″ – 1 3/4. [One Single Track for System Available] Normally we need to install the bracket for system, however it is not a easy job for most of us. Some Customer were not have enough space between the ceiling and Doors. But now it will not be a problem, we have upgrade the system and make it can be install on one track. [EASY TO INSTALL] Step by Step Instruction. [Package Included] 23.3FT Flat Track, 4Rollers, 2Anti-jump Pads, 2Floor Guides, 2Door Stoppers, 5Leg Screws, 5Wall Spacers, 1Manual. [IMPORTANT] ONLY HARDWARE KIT INCLUDING, BARN DOORS WERE NOT INCLUDED. Single Track Barn Door Hardware Kit-Big Spoke Wheel. A Damage caused by undue wear tear, misuse, improper installation or operation, neglect, accidents. B Damage caused by natural disasters, flood fire, lightning, or pollution. C If the item was opened, any parts removed or repaired by any unauthorized person. D If damaged parts are the TFT screen or the screen has less than 3 dead pixels. Please wait for the result of cancellation. The order will be processed and completed by automatic warehouse system within 5 minutes. Sending direct message to cancel the order is not allowed for every case. For the return case.
6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Bl

6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door Kit Black(Bypass Spoke Wheel-1). 37.4 x 5.51 x 3.15 inches. [Single Track Bypass Barn Door Hardware Kit] Condition: New; Material: Carbon Steel(High Standard); Surface: Black Powder Coated(Anti-Rust); Door weight capacity: 265 lbs; Fit door panel width: Up-36″; Door Thickness: 1 3/8″ – 1 3/4. [One Single Track for Bypass System Available] Normally we need to install the bracket for bypass system, however it is not a easy job for most of us. Some Customer were not have enough space between the ceiling and Doors. But now it will not be a problem, we have upgrade the bypass system and make it can be install on one track. [EASY TO INSTALL] Step by Step Instruction. [Package Included] 23FT Flat Track, 4Rollers, 2Anti-jump Pads, 2Floor Guides, 2Door Stoppers, 5Leg Screws, 5Wall Spacers, 1Manual. [IMPORTANT] ONLY HARDWARE KIT INCLUDING, BARN DOORS WERE NOT INCLUDED. ONLY HARDWARE KIT INCLUDING, DOORS WERE NOT INCLUDED. “SINGLE TRACK BYPASS SYSTEM HAVE A OVERLAP BETWEEN TWO BARN DOORS, PLEASE MAKE SURE YOUR BARN DOOR IS WIDE ENOUGH TO FIT THE SYSTEM AND DOOR OPENING”. Q: How much space do i need to keep from ceiling to doorway? A: At least 8. Q:My door is in thickness of 35 mm, how can i fit it with the existing bolt? A:you can use the 5 mm black shim we put in package for roller bolt, then your door will be fit perfectly. Q:Can i cut my rail to fit my space? A: Sure, rail can be cut in any length, but make sure you were cutting the right length you need. Q:if i got a barn door with 40 width, will this rail suit for me? A:Yes, rail length should be twice of door width. Q: How to make sure the barn door is safe and stable after install it? 2 Door stoppers will keep the door between the door stopper, they will stop the door when the roller reach it, make sure the barn door will not leave the track when you opening or closing the door. Floor guide is install under your barn door with a groove, it can stop your door swing under movement. The small round pieces install on the top of barn door to stop the door jump out when closing, opening or moving. Q:What can i do if i can’t install it by myself? A:you can learn the video in our page and we have put the instructions in the package, it is step by step guide, easy to installation. Q:Can i use them out door? A:we do not suggest to use our kit out door, but if you insist on that, please make some cover over the track. 4.1 out of 5 stars. 4.4 out of 5 stars. Fit for barn door. Fit for door panel thickness. In our store for all products. Check our special offers for Home items! Check the best GIFTS with the best price! We’re a little working hard for giving the higher quality service possible and our goal is to give to you the best service possible. We have a big catalogue for you and we use third warehouses and suppliers for giving you the best service possible. NOTE: After a order placed our system will send automatically the request to the warehouses and will be not possible to cancel. We’re working hard to ensure your package arrives as soon as possible. But we will do our best for getting to you your package within 48 hours. Remind that opening a case will get longer timefrime for solving small problems that we can figure out by a message! We try our very best to make sure every customer is completely satisfied. If you have any kind of issue, please reach us by private message and we will work together for finding the best solution. You can pay with.
CALHOME Sliding Bypass Track Hardware 72 Aluminum 2-Set Door System Black

CALHOME Sliding Bypass Track Hardware 72 Aluminum 2-Set Door System Black

CALHOME Sliding Bypass Track Hardware 72 Aluminum 2-Set Door System Black

CALHOME Sliding Bypass Track Hardware 72 Aluminum 2-Set Door System Black

CALHOME Sliding Bypass Track Hardware 72 Aluminum 2-Set Door System Black

CALHOME Sliding Bypass Track Hardware 72 Aluminum 2-Set Door System Black

Made from high-grade aluminum for durability. Tri-wheel hangers provide smooth and quiet operation. Suitable for doors between rooms, closet doors, cabinets. CALHOME Aluminum Sliding Bypass Track and Hardware Set is a heavy-duty by-passing hardware series. It works great for doors between rooms, closet doors, cabinets and storage walls. Track is made of heavy-walled aluminum and guarantees that your door will not jump. This design is easy to install. Builders Hardware Product Type: Bypass Door Hardware. Hardware Color Family: Black. Hardware Finish Family: Aluminum. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. Only factory defects are accepted as a reason for a return. In the case of factory defects, if available, we will replace the product for you. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. Listed by Sku Fetch.
6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

6.6FT Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Door K

Product_description [Single Track Bypass Barn Door Hardware Kit] Condition: New; Material: Carbon Steel(High Standard); Surface: Black Powder Coated(Anti-Rust); Door weight capacity: 265 lbs; Fit door panel width: Up-39.6″; Door Thickness: 1 3/8″ – 1 3/4; [One Single Track for Bypass System Available] Normally we need to install the bracket for bypass system, however it is not a easy job for most of us. Some Customer were not have enough space between the ceiling and Doors. But now it will not be a problem, we have upgrade the bypass system and make it can be install on one track. [EASY TO INSTALL] Step by Step Instruction. [Package Included] 23.3FT Flat Track, 4Rollers, 2Anti-jump Pads, 2Floor Guides, 2Door Stoppers, 5Leg Screws, 5Wall Spacers, 1Manual [IMPORTANT] ONLY HARDWARE KIT INCLUDING, BARN DOORS WERE NOT INCLUDED.
5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass Barn Door Hardware, Flat Track Roller, One-Piece Rail Low Ceiling (5FT). We care about you and we always try to offer the best service possible. We choose with love our products and we’ll bring to your home using third warehouses and suppliers for the best experience possible. Take in mind that some events out of our control could put in delay your order, like climatic events or logistic problems. In this case we will do the best for resolve the issue and we will get in touc withyou. So we can delete any order that can’t fit with out service, and we will not take any responsability or any feedback for this. We will work together for finding the best solution that will fit for you. Doors cannot be thicker than 1-3/4 or the kit won’t work. Because of the door overlap, your door width should be 6” wider than half of the opening width or the opening cannot be fully covered. Usual Track Length=Opening Width+1FT. Service Assurance? ZEKOO stands by you all the time. Please do not hesitate to contact our customer service team if you have any questions. If parts missing or broken, we will send you a replacement ASAP. About ZEKOO Single Track Bypass Kit? Design upgraded, only needs 6 ceiling space from top of the door to ceiling now. Better suited to smaller spaces and saves more space than side pull doors and traditional double track bypass kits. The kit has step-by-step instructions that will help you install the kit faster and easier. Why Choose ZEKOO? Black electrostatic sprayed carbon steel track, say goodbye to corrosion, rust, and scratch. Wheels are covered by nylon, bringing them great durability, vibration, and wear resistance. Bearings are made of high-purity Gcr15 steel, rigorously tested over 160,000 times, and secure the buttery smooth and quiet of the rollers when sliding. Heavy-duty Materials? Track is made from 1/4 solid high standard Q235 carbon steel. Both self-tapping and roller bolts are grade 8.8. These make our hardware kit can hold 230 lbs doors easily. Rubber covered Door Stoppers own a good buffer effect and also reduce the noise. Package List? 2 x 2.5FT Rail, 1 x Junction Plate, 4 x Spacers, 4 x Rollers, 4 x Door Stoppers, 4 x Anti-jump Pad, 2 x Floor Guides, 1 x Step-By-Step Installation Manual, and some small accessories. ZEKOO has devoted to the development of barn door hardware over 10 years, improve and upgrade products to give each family the most appropriate choice. ZEKOO 5ft single track bypass sliding barn door hardware kit use for double doors (door is not include). Q: How to choose barn door track size of single track bypass system? A: Barn door track length = Your opening width +1FT. For example, if your opening is 4FT (48”) wide, you will need 4FT+1FT = 5FT(60”) long track, your each door needs to be 30” wide, your opening will show 25” wide when the door open. Q: Can the single track bypass barn door hardware system let the opening show fully? A: Yes, you can select a longer track, if each door is 30” wide, you can choose 7.5FT track kit. Q: How confirm door width for the single track bypass system? A: Because this is single track bypass, one track hang 2 doors, the wheel diameter is 2-5/8”, so there are at least have 6” overlap between 2 doors when your install the hanger close to the edge of door, usually it will have 8”-10” overlap, so your each door width = Half width of opening + 5” to 6′. Q: Can each door slide independently on the track? A: No, the 2 doors slide on same track, so the 2 rollers will be hit together when one door slide to the end, maybe drive another door slide, if you have enough ceiling space above door for 9”, you can choice double track bypass system, please search ASIN number B06XPYZV8M from our store. Q: Can the single track bypass use for four door also? A: Yes, you can add 1 set straight hanger B01KH3OH4E and 1 set offset hanger B08L4GWTNP for the other 2 doors, please search the product number from our shop, just need to know that there have 8”-10” overlap between 2 doors, so each door need 5”-6” wider. About all accessories of 5 FT single track bypass hardware. 2 pieces of 2.5ft rails. Pre-drilled 16 apart holes. On track, make by solid 1/4 (6.3 mm) thick steel, with 8.8 grade high strength bearing capacity lag blots, fit for concrete wall and wooden wall. Provide 1-3/8” length spacer, it can control the gap between the door and the wall, if you have the door trim on wall, you can change other length spacer, please tell us. Prevent the door falling off from the track, it installed at the end of track 2 side, ensure the stability and safety, with the rubber plug, good damping effect and reduce the noise, have 2 screws to fasten stopper on track, you can put stopper on track where you want to stop your door, easy to remove if you want adjust. Can prevent the door swinging back and forth or against the baseboard, let your door slide on same locus, fit for all thickness with grooved or ungrooved doors. Can prevent door to be lifted off rail when the barn door slide, ensure the stability and safety. Only the hardware is for sale, door is not included, we are professional factory, accept mass customization. 1The hardware kit is heavy, we suggest to install the track on the studs of the wall. The hardware kit can also be installed on the brick wall and wood wall. If the wall is drywall or sheetrock, and no studs in the wall, the installed track might descend, the kit will not work. 2If there’s thick trim/baseboard/deco on the wall, you may need install the headboard on the wall, then install the track on the headboard. If you can’t sure that if the headboard is needed or not, please let us know, we will assist you. 3The recommended door thickness is from 1-3/8″ to 1-3/4″, because the size of offset hanger is fixed, the door thickness can’t more than 1-3/4. If door is thin, you may need to check the gap info below, to know the gap between door&wall, inside door&outside door. The barn door hanger roller with Professional bearings, make your bypass barn door hardware service life last longer. Material quality is high purity Gcr15 steel, professional bearing materials, ring fixed structure bearing, wraps around the steel ball and prevent steel ball from leaving the locus, make sliding more stable. There is a dust cover the bearing to prevent dust from entering and lubricating oil leakage, let the roller can slide smoothly and more durable. 1 hanger with 2 life time lubricated bearing, ensure sliding balance and stability, test beyond 160,000, you can use it for a long time. The roller surface is covered with nylon, wear-resisting and slide very quietly. We design the Dowel pin Front part slightly larger, keep the dowel stuck in hole not fall off. All of prat is make by Q235 carbon steel, thick is 1/4” (6.3mm). 8.8 grade roller bolt can hold the doors comfortably. The offset hanger with anti-jump design, give you safe sliding door experience. Single track bypass hardware kit package include. 2 x 2.5FT Rail. 2 x Straight steel Hanger with bolt. 2 x Offset steel Hanger with bolt. 2 x Door Stopper with Hex Wrench. 4 x 1-3/8” Spacer with lag bolt. 1 x Junction Plate. 2 x Floor Guide with screw. 2 x Anti-Jumper with screw. 2 x Offset Anti-Jumper with screw. 1 x Barn Door Hardware Installation Manual. Why choice Single track bypass barn door hardware. Single track bypass barn door hardware system slides horizontally, it can save space compared with ordinary push door. Wall-mounted is low ceiling 6” install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space. Decorate your locker room, closet, kitchen, wardrobe, bathroom, bedroom, storeroom, change your home dull image. Barn door Installation dimension. Q: How much gap of the double track bypass system? A: We suggest door thickness less than or equal to 1-9/16”, If your door thickness is 1-9/16”, the gap between inner door&wall is about 5/8”, the gap between two door panels is about 1-3/16”, the outer door extend from the wall is 5”. Q: How to narrow the gap for the thinner door? A: If the thinner the door, the larger the gap, you can add a headboard on front of door, then install the hanger on headboard, that can narrow the gap of door with wall and door with door. Single track barn door bypass instructions step by step with fractional measurements in inch, have detailed word instructions with pictures. The track drilling hole on wall is = your door height + 1-11/16′. The hanger first hole install on door is 1-9/16″ from top of door, second hole is 3-9/16″ from first hol. Q: How much ceiling space requirement of the single track bypass system? A: At least 6 from top of door to ceiling to install. Q: Can i cut the track? A: Yes, you can cut it into any length of you want. Q: Can i use it for outdoors? A: We suggest if use for outdoors, you can make some cover above the track, and you need paint and add oil regularly to extended service life. Q: What circumstances do I need to add a headboard? If you have a doorway trim; 2. If the studs don’t line up with the pre-drilled holes in the rail. Q: How thick door use for it? What is the weight capacity? We suggest 1-3/8″ 1-9/16″ thick door will be better, If your door thick is 1-1-3/4, the inner door bolts need reverse installation, because the offset hanger size is fixed; 2. 4.5 out of 5 stars. 4.6 out of 5 stars. 4.7 out of 5 stars. 4.0 out of 5 stars. Fit Door Panel Thickness. 31.4 x 6.2 x 3.4 inches. Expital, we offer the best to you since the 2013.