Sliding Door Hardware
4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors

US Barn Door Hardware. US Home & Garden. UK Barn Door Hardware. Bypass For 2 Doors. Bypass For 4 Doors. 4-16FT Top Mount Steel Sliding Barn Door Hardware Kit For Single/ Double Doors. Roller Material:Carbon Steel Track Material: AluminumTrack Thickness :5.5 mm. Track Width :40 mm. Maximum load-bearing capacity of a single door. 330lbs (150kg) Suitable for door thickness. From 1 3/16″ to 2″3cm-5cm. Durable & Safe? High quality barn door hardware kit, Premium nylon roller wheel, Gcr15 roller bearing, High strength industrial grade track, Can easily hold 330bls loads. Advantage?? Spring Door Stops, reduce noise and extend life? Pre- drilled rails, steel bearings? Wide Applicability? The rustic wooden sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. Ply you within 24 hou. Step by step installation manual, professional after-sales customer service help you install easily. Inner nylon wheels, will not wear the track when rolling. Unique Spring Door Stops. Door stopper can n. Reduce sound during sliding your door. Lso extend the life of the kit. Mounted on the top of the door, prevent the door from popping out of the track during movement. The roller screws can be adjusted freely. In any size within the door thickness. Rail SpacersAccording to rail holes. 1 hole need 1 set. Roller Bolt: x4. Door Stopper: x2. T-shape Floor Guide: x1. Install Manual: x1. Ackage includes: For Double Door. According to rail holes. Roller Bolt: x8. Door Stopper: x4. T-shape Floor Guide: x2. How to choose track length? Track’s length should be. Of door panel’s width. (like your door width is 2.5FT/76cm, You will need 5FT/152cm Kit for single door). The length of the track should be. The width of the door panel. (like your door width is 24”/61cm, You will need 96”/244cm hardware Kit). You should receive item within 3-7 days. But we will try our best to ensure the items reach soon. We accept items return within 30 days from the date you receive the package.
ZEKOO 6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors

ZEKOO 6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors

ZEKOO 6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors

ZEKOO 6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors

ZEKOO 6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors

ZEKOO 6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors

ZEKOO 6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors

Zekoo bard door hardware kit. Went a different direction with that doorway. Doors cannot be thicker than 1-3/4 or the kit won’t work. Because of the door overlap, your door width should be 6” wider than half of the opening width or the opening cannot be fully covered. Usual Track Length=Opening Width+1FT. Service Assurance? ZEKOO stands by you all the time. Please do not hesitate to contact our customer service team if you have any questions. If parts missing or broken, we will send you a replacement ASAP. About ZEKOO Single Track Bypass Kit? Design upgraded, only needs 6 ceiling space from top of the door to ceiling now. Better suited to smaller spaces and saves more space than side pull doors and traditional double track bypass kits. The kit has step-by-step instructions that will help you install the kit faster and easier. Why Choose ZEKOO? Black electrostatic sprayed carbon steel track, say goodbye to corrosion, rust, and scratch. Wheels are covered by nylon, bringing them great durability, vibration, and wear resistance. Bearings are made of high-purity Gcr15 steel, rigorously tested over 160,000 times, and secure the buttery smooth and quiet of the rollers when sliding. Heavy-duty Materials? Track is made from 1/4 solid high standard Q235 carbon steel. Both self-tapping and roller bolts are grade 8.8. These make our hardware kit can hold 230 lbs doors easily. Rubber covered Door Stoppers own a good buffer effect and also reduce the noise. Package List? 2 x 3FT Rail, 5 x Spacers, 4 x Rollers, 2 x Door Stoppers, 4 x Anti-jump Pad, 2 x Floor Guides, 1 x Step-By-Step Installation Manual, and some small accessories.
Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Steel

Durable Double Closet Track Rolling/Sliding Door Hardware Set Kit 96 in. Builders Hardware Product Type. Provides quiet and smooth rolling movement for closet doors. Made with corrosion-resistant galvanized steel for durability. Compatible with 1-3/8 in. The Everbilt 96 in. Bi-Fold Sliding Door Set allows 2 sliding closet doors to move smoothly and quietly. It is designed for doors with a thickness of 3/4 – 1-3/8 in. That weigh up to 60 lb. Its floor guide can withstand strong impacts and the jump-proof V-shaped track is made with corrosion-resistant galvanized steel for durability. NOTE: The actual track length for the 96 inch door opening is 93.5 inches. Made of corrosion-resistant galvanized steel. Designed to allow closet doors to roll quietly and smoothly. Floor guide can withstand strong impacts. Dial-adjust hangers allow up to 5/16 in. Designed for 2 sliding closet doors with a thickness of 3/4 – 1-3/8 in. Detailed instructions included for easy installation. Pre-drilling required for installation. Set includes dial-adjust hangers, door alignments, a V-shaped track, rollers, a floor guide and hardware. NOTE: Dial-adjust hangers come with two different offsets. When installing doors with 3/4 in. Thickness use #2 hangers 1/8 in. Offset on the rear door. When installing doors with 1-3/8 in. Thickness use #1 hangers 7/16 in. On the rear door. Refer to step 7 in instructions. We offer the best prices around on high quality products. Our E-store includes tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.
6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass

100% Satisfaction Satisfaction Guaranteed. 6FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Bypass Barn Door Track Kit, Flat Track Roller, Low Ceiling (6FT). 36 x 6 x 3.5 inches. 6.0 inches x 36.0 inches x 3.5 inches. Weight: 19.99 lb 6.0 inches x 36.0 inches x 3.5 inches. Weight: 19.99 lb. Doors cannot be thicker than 1-3/4 or the kit won’t work. Because of the door overlap, your door width should be 6” wider than half of the opening width or the opening cannot be fully covered. Usual Track Length=Opening Width+1FT. Service Assurance? ZEKOO stands by you all the time. Please do not hesitate to contact our customer service team if you have any questions. If parts missing or broken, we will send you a replacement ASAP. About ZEKOO Single Track Bypass Kit? Design upgraded, only needs 6 ceiling space from top of the door to ceiling now. Better suited to smaller spaces and saves more space than side pull doors and traditional double track bypass kits. The kit has step-by-step instructions that will help you install the kit faster and easier. Why Choose ZEKOO? Black electrostatic sprayed carbon steel track, say goodbye to corrosion, rust, and scratch. Wheels are covered by nylon, bringing them great durability, vibration, and wear resistance. Bearings are made of high-purity Gcr15 steel, rigorously tested over 160,000 times, and secure the buttery smooth and quiet of the rollers when sliding. Heavy-duty Materials? Track is made from 1/4 solid high standard Q235 carbon steel. Both self-tapping and roller bolts are grade 8.8. These make our hardware kit can hold 230 lbs doors easily. Rubber covered Door Stoppers own a good buffer effect and also reduce the noise. Package List? 2 x 3FT Rail, 5 x Spacers, 4 x Rollers, 2 x Door Stoppers, 4 x Anti-jump Pad, 2 x Floor Guides, 1 x Step-By-Step Installation Manual, and some small accessories. ZEKOO has devoted to the development of barn door hardware over 10 years, improve and upgrade products to give each family the most appropriate choice. ZEKOO 6ft single track bypass sliding barn door hardware kit use for double doors (door is not include). Q: How to choose barn door track size of single track bypass system? A: Barn door track length = Your opening width +1FT. For example, if your opening is 5FT (60”) wide, you will need 5FT+1FT = 6FT(72”) long track, your each door needs to be 36” wide, your opening will show 31” wide when the door open. Q: Can the single track bypass barn door hardware system let the opening show fully? A: Yes, you can select a longer track, if each door is 36” wide, you can choose 9FT track kit. Q: How confirm door width for the single track bypass system? A: Because this is single track bypass, one track hang 2 doors, the wheel diameter is 2-5/8”, so there are at least have 6” overlap between 2 doors when your install the hanger close to the edge of door, usually it will have 8”-10” overlap, so your each door width = Half width of opening + 5” to 6′. Q: Can each door slide independently on the track? A: No, the 2 doors slide on same track, so the 2 rollers will be hit together when one door slide to the end, maybe drive another door slide, if you have enough ceiling space above door for 9”, you can choose double track bypass system, please search ASIN number B06XPYZV8M from our shop. Q: Can the single track bypass use for four door also? A: Yes, you can add 1 set straight hanger B01KH3OH4E and 1 set offset hanger B08L4GWTNP for the other 2 doors, please search the product number from our shop, just need to know that there have 8”-10” overlap between 2 doors, so each door need 5”-6” wider. About all accessories of 6 FT single track bypass hardware. Pre-drilled 16 apart holes. On track, make by solid 1/4 (6.3mm) thick steel, with 8.8 grade high strenghth bearing capacity lag blots, fit for concrete wall and wooden wall. Provide 1-3/8” length spacer, it can control the gap between the door and the wall, if you have the door trim on wall, you can change other length spacer, please tell us. Prevent the door falling off from the track, it installed at the end of track 2 side, ensure the stability and safety, with the rubber plug, good damping effect and reduce the noise, have 2 screws to fasten stopper on track, you can put stopper on track where you want to stop your door, easy to remove if you want adjust. Can prevent the door swinging back and forth or against the baseboard, let your door slide on same locus, fit for all thickness with grooved or ungrooved doors. Can prevent door to be lifted off rail when the barn door slide, ensure the stability and safety. Only the hardware is for sale, door is not included, we are professional factory, accept mass customization. 1The hardware kit is heavy, we suggest to install the track on the studs of the wall. The hardware kit can also be installed on the brick wall and wood wall. If the wall is drywall or sheetrock, and no studs in the wall, the installed track might descend, the kit will not work. 2If there’s thick trim/baseboard/deco on the wall, you may need install the headboard on the wall, then install the track on the headboard. If you can’t sure that if the headboard is needed or not, please let us know, we will assist you. 3The recommended door thickness is from 1-3/8″ to 1-3/4″, because the size of offset hanger is fixed, the door thickness can’t more than 1-3/4. If door is thin, you may need to check the gap info below, to know the gap between door&wall, inside door&outside door. The barn door hanger roller with Professional bearings, make your bypass barn door hardware service life last longer. Material quality is high purity Gcr15 steel, professional bearing materials, ring fixed structure bearing, wraps around the steel ball and prevent steel ball from leaving the locus, make sliding more stable. There is a dust cover the bearing to prevent dust from entering and lubricating oil leakage, let the roller can slide smoothly and more durable. 1 hanger with 2 life time lubricated bearing, ensure sliding balance and stability, test beyond 160,000, you can use it for a long time. The roller surface is covered with nylon, wear-resisting and slide very quietly. We design the Dowel pin Front part slightly larger, keep the dowel stuck in hole not fall off. All of prat is make by Q235 carbon steel, thick is 1/4” (6.3mm). 8.8 grade roller bolt can hold the doors comfortably. The offset hanger with anti-jump design, give you safe sliding door experience. Single track bypass hardware kit package include. 2 x 3FT Rail. 2 x Straight steel Hanger with bolt. 2 x Offset steel Hanger with bolt. 2 x Door Stopper with Hex Wrench. 5 x 1-3/8” Spacer with lag bolt. 2 x Floor Guide with screw. 2 x Anti-Jumper with screw. 2 x Offset Anti-Jumper with screw. 1 x Barn Door Hardware Installation Manual. Why choice Single track bypass barn door hardware. Single track bypass barn door hardware system slides horizontally, it can save space compared with ordinary push door. Wall-mounted is low ceiling 6” install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space. Decorate your locker room, closet, kitchen, wardrobe, bathroom, bedroom, storeroom, change your home dull image. Barn door Installation dimension. Q: How much gap of the double track bypass system? A: We suggest door thickness less than or equal to 1-9/16”, If your door thickness is 1-9/16”, the gap between inner door&wall is about 5/8”, the gap between two door panels is about 1-3/16”, the outer door extend from the wall is 5”. Q: How to narrow the gap for the thinner door? A: If the thinner the door, the larger the gap, you can add a headboard on front of door, then install the hanger on headboard, that can narrow the gap of door with wall and door with door. Single track barn door bypass instructions step by step with fractional measurements in inch, have detailed word instructions with pictures. The track drilling hole on wall is = your door height + 1-11/16′. The hanger first hole install on door is 1-9/16″ from top of door, second hole is 3-9/16″ from first hole. Q: How much ceiling space requirement of the single track bypass system? A: At least 6 from top of door to ceiling to install. Q: Can i cut the track? A: Yes, you can cut it into any length of you want. Q: Can i use it for outdoors? A: We suggest if use for outdoors, you can make some cover above the track, and you need paint and add oil regularly to extended service life. Q: What circumstances do I need to add a headboard? If you have a doorway trim; 2. If the studs don’t line up with the pre-drilled holes in the rail. Q: How thick door use for it? What is the weight capacity? We suggest 1-3/8″ 1-9/16″ thick door will be better, If your door thick is 1-1-3/4, the inner door bolts need reverse installation, because the offset hanger size is fixed; 2. Fit Door Panel Thickness. We’re a start up with the main goal: to love our costumers. Our Staff works hard every day for giving to you the best high quality items and the best costumer care. We are always working hard to ensure your package arrives as soon as possible. We try over very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.
6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

6.6 Feet Bypass Sliding Barn Door Hardware Kit – for Double Wooden Doors-Single Track – Smoothly & Quietly – Easy to Install-Fit 67 Opening. 6.6FT Bypass Kit. 60.5 x 5.5 x 3.5 inches. Why choose us: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit is provided along with a completely turnkey experience. Overlap Space: There would be a 8″-12″ overlap space since the 2 doors are hanging on one single rail. Please be reminded that your door panels should be wider than your opening(8 at leaset). If not, the 2 rollers will hit when one door slide, then drive other door slide. Package included: A Barn Door Hardware kit 2x 3.3ft Rail, 5x Rail Spacer, 4x Roller, 2x Door Stop, 1x Floor Guide, 1x Hex Key; All other necessary hardware is included as you see in the pictures. For 16 inch stud. Door weight capacity: 150lb-200lb; Fit door panel Width: 40”; Door panel thickness: 1 3/8″ and 1 9/16″. Simple and easy to install: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team. Q: How to ensure the stability and safety of the door? Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close. A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard. Q: When do you need a headboard? If the studs don’t line up with the pre-drilled holes in the rail. If there is a doorway trim. Q: How much space do I need above the doorway? A: You will need a minimum of 6 from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: How thick of a door will this kit work with? A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8″ to 1 3/4″, but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below. 2”- door depth – trim depth. If your answer is 0 or greater, then you’re fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board. Door included or not. Suitable Track Length (ft). 12” Handle 2 Pack. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.
Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Inc

Double Barn Door 24In×84In Barn Door with 8FT Sliding Door Hardware & Handle Included, Easy to Install. 1.4 x 24 x 84.01 inches. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help.
12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

12FT Sliding Barn Door Hardware Track Kit for Double Door Easy to 12 Feet

At, all parts of our 12ft barn door hardware kit are made from quality materials and handcrafted by skilled artisans. Low clearance barn door hardware, less space is required because of sliding closet door hardware are made of premium quality carbon steel.
SMARTSTANDARD 6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Woo

SMARTSTANDARD 6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Woo

SMARTSTANDARD 6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Woo

SMARTSTANDARD 6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Woo

SMARTSTANDARD 6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Woo

SMARTSTANDARD 6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Woo

SMARTSTANDARD 6.6 Feet Bypass Sliding Barn Door Hardware Kit for Double Woo

This new SMARTSTANDARD Country Black Steel Sliding Barn Wood Door Hardware can transform your doorway into a side sliding entry. Easy to install and stable structure: one 6.6ft rail, rather than two short rails.
Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Doors Kit Black

Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Doors Kit Black

Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Doors Kit Black

Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Doors Kit Black

Heavy Duty Sliding Barn Door Hardware Single Track Bypass Double Doors Kit Black

Kämpfen Sie mit dem kleinen Raum in Ihrem Haus, wo Sie die Schiebetür nicht installieren können? Mögen Sie den dekorativen Stil von Schiebetüren? . Wenn es Ihnen gefällt, entscheiden Sie sich für unser Schiebetürsystem CCJH.
5 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

5 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

5 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

5 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

5 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

5 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

5 Feet Bypass Sliding Barn Door Hardware Kit for Double Wooden Doors-Single

If there is a doorway trim. Q: How much space do I need above the doorway? . Overlap Space: There would be a 8″-12″ overlap space since the 2 doors are hanging on one single rail.