Stainless Steel Sliding Bar. N Door Hardware T Shape. The sliding barn door hardware system fit door thickness 3cm-4cm. Stainless steel chrome rai. L, rigid plate structure, strong load capacity, Weight maximum door is 100 kg. Add anti-falling wheel on the roller, prevent the roller falling off. Pre- drilled rails with adjustable fixed seat, add mat behind the seat, protect the wall surface. Adoption of double edge grinding processing, the track edge is smooth and not hurt the hand. Space saving due to sliding motion, The sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. Any questions feel free to tell us, our Customer Service team will. Follow up and solve it for you as soon as possible. The aviation stainless steel. Track with decorative chrome plating, wall thickness is up to 2mm, the track adopts mechanical design, add keel support in the middle, through strict test can strongly support weight. Add anti-falling wheel on the roller, can effectively prevent the roller hanger from falling off during sliding. The head of the door stopper is nylon arc, Perfect fit with roller pulley radian, reducing noise. No need to slot the door, no need to punch holes on the floor, there is an auxiliary wheel at the back, and wheels are made of nylon, fully protect your door panel. Door Stop: 2 PCS (1 PAIRS). 1 hole need 1 set. How to Choose Track Size. Track’s length should be two times of door panel’s width (like your door width is 2.5FT/76cm, You will need 5FT/152cm Kit for single door).

Sliding barn door hardware kit. Stainless Steel Sliding Barn Door Hardware Kit. Stainless Steel Sliding Bar. N Door Hardware T Shape. The sliding barn door hardware system fit door thickness 3cm-4cm. Stainless steel chrome rai. L, rigid plate structure, strong load capacity, Weight maximum door is 100 kg. Add anti-falling wheel on the roller, prevent the roller falling off. Pre- drilled rails with adjustable fixed seat, add mat behind the seat, protect the wall surface. Adoption of double edge grinding processing, the track edge is smooth and not hurt the hand. Space saving due to sliding motion, The sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. Any questions feel free to tell us, our Customer Service team will. Follow up and solve it for you as soon as possible. The aviation stainless steel. Track with decorative chrome plating, wall thickness is up to 2mm, the track adopts mechanical design, add keel support in the middle, through strict test can strongly support weight. Add anti-falling wheel on the roller, can effectively prevent the roller hanger from falling off during sliding. The head of the door stopper is nylon arc, Perfect fit with roller pulley radian, reducing noise. No need to slot the door, no need to punch holes on the floor, there is an auxiliary wheel at the back, and wheels are made of nylon, fully protect your door panel. Door Stop: 2 PCS (1 PAIRS). 1 hole need 1 set. How to Choose Track Size. Track’s length should be two times of door panel’s width (like your door width is 2.5FT/76cm, You will need 5FT/152cm Kit for single door). You should receive item within 3-7 days. But we will try our best to ensure the items reach soon. We accept items return within 30 days from the date you receive the package.

36&#######x27;&#######x27;x84&#######x27;&#######x27; Sliding Barn Door with 6.6 Ft Barn Door Hardware Kit& Handle& Floor Guides, Pre-Drilled Holes Easy Assembly – Include Installation Manual, Water-Proof PVC Surface, H-Frame, White. MDF Material: With CARB P2 certification, the main component is pine wood and a small amount of other wood and adhesives are added to extrude the wood slab. High-quality furniture decoration materials, harder than a natural wood door. Easy Installation for DIY Novice: Pre-drilled Door and hardware, with step by step installation manual, professional customer service, any question would be replied within 24 hours. Easy and Meaningful Installation processes with your family. Nice product gift for your home decor! PVC-Surface: The high-quality white PVC material is tightly bonded to the MDF wood board through high temperature and high pressure, and the layers are laminated to create a tightly bonded, waterproof, and scratch-resistant surface. Package Includes: 1x Barn Door, Width: 36&#######x27;&#######x27; Height: 84&#######x27;&#######x27; Thickness: 1 3/8&#######x27;&#######x27;, H-shape; 1 X 6.6 FT Barn door hardware kit, 1x Barn Door Handle, length: 12&#######x27;&#######x27;; 1x Barn Door Floor Guide, as the picture shows. Multiple Application: a sliding door for your house, match with dining room, living room, bathroom, kitchen, storage! Save home space, harmless and easy cleaning. Item Weight: 80 Pounds. Item Weight:? 80 Pounds. Item Weight:? 80 pounds. Package Dimensions:? 87.5 x 11.5 x 5.5 inches. Country of Origin:? China. Size:? 36&#######x27;&#######x27;x84&#######x27;&#######x27. Date First Available: April 30, 2021. And we will work with you to resolve it to your satisfaction.

Stainless Steel Sliding Bar. N Door Hardware T Shape. The sliding barn door hardware system fit door thickness 3cm-4cm. Stainless steel chrome rai. L, rigid plate structure, strong load capacity, Weight maximum door is 100 kg. Add anti-falling wheel on the roller, prevent the roller falling off. Pre- drilled rails with adjustable fixed seat, add mat behind the seat, protect the wall surface. Adoption of double edge grinding processing, the track edge is smooth and not hurt the hand. Space saving due to sliding motion, The sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. Any questions feel free to tell us, our Customer Service team will. Follow up and solve it for you as soon as possible. The aviation stainless steel. Track with decorative chrome plating, wall thickness is up to 2mm, the track adopts mechanical design, add keel support in the middle, through strict test can strongly support weight. Add anti-falling wheel on the roller, can effectively prevent the roller hanger from falling off during sliding. The head of the door stopper is nylon arc, Perfect fit with roller pulley radian, reducing noise. No need to slot the door, no need to punch holes on the floor, there is an auxiliary wheel at the back, and wheels are made of nylon, fully protect your door panel. Door Stop: 2 PCS (1 PAIRS). 1 hole need 1 set. How to Choose Track Size. Track’s length should be two times of door panel’s width (like your door width is 2.5FT/76cm, You will need 5FT/152cm Kit for single door).

Stainless Steel Sliding Bar. N Door Hardware T Shape. The sliding barn door hardware system fit door thickness 3cm-4cm. Stainless steel chrome rai. L, rigid plate structure, strong load capacity, Weight maximum door is 100 kg. Add anti-falling wheel on the roller, prevent the roller falling off. Pre- drilled rails with adjustable fixed seat, add mat behind the seat, protect the wall surface. Adoption of double edge grinding processing, the track edge is smooth and not hurt the hand. Space saving due to sliding motion, The sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. Any questions feel free to tell us, our Customer Service team will. Follow up and solve it for you as soon as possible. The aviation stainless steel. Track with decorative chrome plating, wall thickness is up to 2mm, the track adopts mechanical design, add keel support in the middle, through strict test can strongly support weight. Add anti-falling wheel on the roller, can effectively prevent the roller hanger from falling off during sliding. The head of the door stopper is nylon arc, Perfect fit with roller pulley radian, reducing noise. No need to slot the door, no need to punch holes on the floor, there is an auxiliary wheel at the back, and wheels are made of nylon, fully protect your door panel. Door Stop: 2 PCS (1 PAIRS). 1 hole need 1 set. How to Choose Track Size. Track’s length should be two times of door panel’s width (like your door width is 2.5FT/76cm, You will need 5FT/152cm Kit for single door).

9FT Sliding Barn Door Hardware Kit, (Rail Kit & Pull Handle & Floor Guide), Fit 48″-54″ Wide Door, Sturdy Heavy Duty. Package Included: 2x 4.5FT Rail, 1x Pull&Flush Handle, 1x Floor Guide, 2x Rollers, 7x Rail Spacers, 2x Door Stoppers, 1x Hex Key, BARN DOOR NOT INCLUDED. Durable & Sturdy – High strength industrial grade tracks and pulleys can easily hold 230 lbs loads; Great for door thickness between 1 3/8 – 1 3/4 thickness. Selected material and excellent forging process provide a safe and guaranteed life for your family. Stable & Quietly – There are 2 anti-jump disks for keeping roller on rail and an up-side-down, two shaped guide stabilizes the bottom to keep it from swinging as it’s moved from side to side. This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms. Simple And Easy To Install: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team. Widely Application – Expansion screws are used for cement walls, ordinary screws are used for wood walls and cabinets, etc. Rustic style suitable for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on; waterproof and rust resistant tract kit also a nice door accessory for barns, garages, stables, etc. Floor Guides: Two shaped floor guide can be used according to your needs. It can keep your door stable and prevent the door bottom swinging back and forth during movement. Anti-Jump Disk: It’s a small round discs that can stuck between the track and the top of the door, and can prevent the door from falling when sliding the door. Barn Door Hardware Kit: Door weight capacity: 230lbs, fit door panel thickness: 1 3/8” and 1 3/4”. Designed with premium sliding pulleys, it provides silent, smooth and steady rolling, enable to use for years. Door Stoppers: It can prevent the hangers coming out of the rail, and they’re cushioned by rubber caps for a quiet close. 12” Double Side Handle. Designed with security and durability, beauty and comfortable to hold. Whether you are inside or outside, you can easily pull the door. 9FT Barn Door Hardware Kit. 2x 4.5FT Rail. (Barn Door Not Included). Q: What is the maximum door panel width allowed? A: Door panel width: 54. Q: How much space do I need above the doorway? A: You will need a minimum of 5 from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: Can i cut the track? A: Yes, you can cut it into any length to meet your own require. Q: When do you need a header board? A:There are two situations that require a header board. If the studs don’t line up with the pre-drilled holes in the rail. If there is a doorway trim. 4.5 out of 5 stars. Double Door + Bypass. Door Included Or Not. 5.0 out of 5 stars. 36x80in barn door and hardware included(track, handle, floor guide). 36x84in barn door with handle and floor guide. 48x84in barn door only. 48x84in barn door with handle and floor guide. 55 x 5 x 3.4 inches. Product Dimensions: 5.0 inches x 55.0 inches x 3.4 inches. Weight: 22.1 lb. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Your satisfaction is guaranteed! All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. We will work with you to resolve any problem you may have.

Sliding barn door hardware kit. Sliding Barn Door Hardware Kit. Sliding Door Installation Kit. Adjustable Roller Screws, Fit door thickness 1 1/4″-2″(3cm-5cm). High quality barn door hardware kit, Premium nylon roller wheel, Gcr15 roller bearing, High strength industrial grade track, Can easily hold 330bls loads. Spring Door Stops, reduce noise and extend life? Pre- drilled rails, steel bearings? New design connection system, Connect Rail stable. The rustic wooden sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. The traditional design elements make both rustic and modern environment look simple and elegant, save space and be practical. This accessory for sliding doors for wooden doors can be used in any interior space, storage room, utility room, large bathroom, dressing room, office, blinds, areas of great mobility etc. The install instruction is included and exact. Perfect design and stable accessories. Made of high quality steel material. Suitable for door thickness from 1 1/4 to 2 inch. All necessary accessories for the assembly of the sliding door hardware are included. The door is not included. E head of the door stopper is nylon arc, Perfect fit with roller pulley radian, reducing noise. The inside of the wheel is nylon material, protect the track from damage, silent rolling, no noise. The aviation aluminum track with decorative chrome plating, wall thickness is. Up to 2mm, the track adopts mechanical design, add keel support in the middle, through strict test can strongly support weight. No need to slot the door, no need to punch holes on the floor, there is an auxiliary wheel at the back, and wheels are made of nylon, fully protect your door panel. Add anti-falling wheel on the roller, can effectively preven. T the roller hanger from falling off during sliding. About Track: The material of the track is aluminum, which is very light. After special processing, the bearing capacity is extremely strong. About Roller: Main material is carbon steel, adjustable screws, suitable door thickness from 3cm-5cm. Rail Accessories (Reference Track Size). How to choose the size of the kit? Track’s length should be twice of door panel’s width (like your door width is 24”/60.9cm, You will need 48”/121cm hardware Kit). You should receive item within 3-7 days. But we will try our best to ensure the items reach soon. We accept items return within 30 days from the date you receive the package.

Sliding barn door hardware kit. Sliding Barn Door Hardware Kit. Sliding Door Installation Kit. Adjustable Roller Screws, Fit door thickness 1 1/4″-2″(3cm-5cm). High quality barn door hardware kit, Premium nylon roller wheel, Gcr15 roller bearing, High strength industrial grade track, Can easily hold 330bls loads. Spring Door Stops, reduce noise and extend life? Pre- drilled rails, steel bearings? New design connection system, Connect Rail stable. The rustic wooden sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. The traditional design elements make both rustic and modern environment look simple and elegant, save space and be practical. This accessory for sliding doors for wooden doors can be used in any interior space, storage room, utility room, large bathroom, dressing room, office, blinds, areas of great mobility etc. The install instruction is included and exact. Perfect design and stable accessories. Made of high quality steel material. Suitable for door thickness from 1 1/4 to 2 inch. All necessary accessories for the assembly of the sliding door hardware are included. The door is not included. E head of the door stopper is nylon arc, Perfect fit with roller pulley radian, reducing noise. The inside of the wheel is nylon material, protect the track from damage, silent rolling, no noise. The aviation aluminum track with decorative chrome plating, wall thickness is. Up to 2mm, the track adopts mechanical design, add keel support in the middle, through strict test can strongly support weight. No need to slot the door, no need to punch holes on the floor, there is an auxiliary wheel at the back, and wheels are made of nylon, fully protect your door panel. Add anti-falling wheel on the roller, can effectively preven. T the roller hanger from falling off during sliding. About Track: The material of the track is aluminum, which is very light. After special processing, the bearing capacity is extremely strong. About Roller: Main material is carbon steel, adjustable screws, suitable door thickness from 3cm-5cm. Rail Accessories (Reference Track Size). How to choose the size of the kit? Track’s length should be twice of door panel’s width (like your door width is 24”/60.9cm, You will need 48”/121cm hardware Kit). You should receive item within 3-7 days. But we will try our best to ensure the items reach soon. We accept items return within 30 days from the date you receive the package.

Sliding Barn Door Hardware Kit For Single/Double Door. A djustable F loor Gu id e:? There is no need to punch holes on the floor, the shelf is made of carbon steel, the wheels are made of nylon, and there is an auxiliary wheel at the back, which can keep the distance between your door panel and the wall 1cm. Durable & Safe? High quality barn door hardware kit, Premium nylon roller wheel, Gcr15 roller bearing, High strength industrial grade track, Can easily hold 330bls loads. Advantage?? Spring Door Stops, reduce noise and extend life? Pre- drilled rails, steel bearings? Wide Applicability? The rustic wooden sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. Ply you within 24 hou. The traditional design elements make both rustic and modern environment look simple and elegant, save space and be practical. This accessory for sliding doors for wooden doors can be used in any interior space, storage room, utility room, large bathroom, dressing room, office, blinds, areas of great mobility etc. The install instruction is included and exact. Perfect design and stable accessories. Made of high quality steel material. Suitable for door thickness from 1 1/5 to 2 inch. All necessary accessories for the assembly of the sliding door hardware are included. The door is not included. Door Stops: Spring door stop, special design protect roller and reduce noise. Nylon material, protect the track from damage, silent rolling, no noise. Track width is 4cm, thickness is 6mm; if door thickness is 4cm, the distance from the door to wall about 1cm. Door Stops: Prevent roller from falling off the track, the spring can reduce A’s impulse, and the nylon head will not damage roller. Anti-jump Disk: Installed on the top of the door, prevent the door from popping out of the track during the movement. The material of the track is aluminum, which is very light. After special processing, the bearing capacity is extremely strong. Ial is carbon steel, adjustable screws, suitable door thickness from 3cm-5cm. Roller: 2 PCS (1 PAIR). Door Stopper: 2 PCS (1 PAIR). Track fixing accessories set. Accoding to rail holes. 1 hole need 1 set. Door Stopper: 4 PCS (2 PAIR). How to choose track length? Track’s length should be twice of door panel’s width (like your door width is 2FT/60.9cm, You will need 4FT/121cm hardware Kit).

Sliding Barn Door Hardware Kit. Bypass Track Kit(Double Track). Carbon Steel Track Kit. Stainless Steel Track Kit. Floor Guide/ Door Stopper. 4-16FT Sliding Barn Door Hardware Track Kit & Adjustable Floor Guide for 1/2Door. He traditional design elements make both rustic and modern environment look simple and elegant, save space and be practical. This accessory for sliding doors for wooden doors can be used in any interior space, storage room, utility room, large bathroom, dressing room, office, blinds, areas of great mobility etc. The install instruction is included and exact. Perfect design and stable accessories. Made of high quality steel material. Suitable for door thickness from 1 1/4 to 2 inch. All necessary accessories for the assembly of the sliding door hardware are included. The door is not included. SUITABLE PARAMETERS? Adjustable Roller Screws, Fit door thickness 1 1/4″-2″(3cm-5cm). DURABLE & SAFE? High quality barn door hardware kit, Premium nylon roller wheel, Gcr15 roller bearing, High strength industrial grade track, Can easily hold 330bls loads. ADVANTAGE?? Spring Door Stops, reduce noise and extend life? Pre- drilled rails, steel bearings? New design connection system, Connect Rail stable. Wide Applicability? The rustic wooden sliding door fitting are very easily to decorate and suitable for bedroom, study room, dressing room, kitchen, closet, cabinet, farmland etc. The roller screws can be adjusted freely in any size within the door thickness from 1 3/16″ to 2″(3cm-5cm). The spring design door stopper can not only reduce sound during sliding your door, also extend the life of the kit. The little round discs won’t allow your door to be lifted off the rail. Adjustable F loor Guide. No need to slot the door, no need to punch holes on the floor, there is an auxiliary wheel at the back, and wheels are made of nylon, fully protect your door panel. Ackage includes: For Single Door. According to rail holes. 1 hole need 1 set. Roller Bolt: x4. Door Stopper: x2. T-shape Floor Guide: x1. Install Manual: x1. Ackage includes: For Double Door. Roller Bolt: x8. Door Stopper: x4. T-shape Floor Guide: x2. How to choose track length? Track’s length should be. Of door panel’s width (like your door width is 2.5FT/76cm, You will need 5FT/152cm Kit for single door). The length of the track should be four times the width of the door panel. (like your door width is 24”/61cm, You will need 96”/244cm hardware Kit). You should receive item within 3-7 days. But we will try our best to ensure the items reach soon. We accept items return within 30 days from the date you receive the package.