TSMST 6FT Sliding Barn Door Hardware Track Kit with Floor Guide and Spring Damping Door Stopper, Smoothly and Quietly, Widest to 36″ Wide Door (1.18″ to 1.97 Thickness). Heavy Duty Sturdy: The aluminum track with Environmentally friendly materials, Carbon Steel Roller Hanger, matte black finish for ensuring anti-corrosion and years of beauty and longevity. Spring Damping Door Stopper reduce the impact to track. WIDE APPLICABILITY – wood plugs are used for cement walls, screws are used for wood walls and cabinets, etc. Rustic style suitable for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on; waterproof and rust resistant tract kit also a nice door accessory for barns, garages, stables, etc. DOOR WEIGHT CAPACITY: 330 lb; Clearance needed above top of door: 6″; Fit door panel width to 36″; Fit door panel thickness: 1-1/4″ to 1-7/8″. Rail is predrilled with 16 hole apart. PACKAGE INCLUDED – Barn door hardware kit (Spliced Rails, 2x Roller, 2x Anti-jump pad, 2x Door Stops with Spring, 1x Barn Door Floor Guide, 4x rail screws with spacers and wood plugs, 1x Hex Key, 1x Track Connector, 1x Detailed Installation Book) DOOR NOT INCLUDED. Attention:We put the spliced rail into the small upgrade package. If you don’t find it. Please open the package check first. SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team. TSMST 6ft sliding barn door hardware set. This sliding wood door track set is a great design for home, which is a popular new way to bring innovation into the home and close off bedroom and side room in a stunningly unique way. With 1/4 of the cost, you can get the same quality products here! This hardware kit are provided along with a completely turnkey experience. We provide professional instruction to help you solve all installation problems in time, to save the cost of finding a carpenter or decoration team. The door is hung on a piece of hardware with a wheel. That rolls along a track mounted to the wall. This barn door rail not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door. Suitable for indoor decoration in barns, garages, stables, kitchen, bedroom, dressing room, laundry room, utility room, entertainment console, club, pub and so on. Door weight capacity of barn door rail kits is 330lb. Fit max door width is 36”-To help you choose the fit kit, we recommend the track length shoulde be twice of the doors width at least, and you can also cut the track into any length to meet your need. Fit door thickness about 1 3/16″ to 2″(3cm-5cm). The top of the doors to the ceiling: min distance is 6.1 (155 mm). If you have a door trim, you’d better put a header board that is as thick as the trim and then attach the rail to the header board. Only the hardware is for sale, doors are not included. 6 FT Aluminum Rail. Aopt 2 track splicing, includes six pre-drilled holes, every 16 pre-drilled a hole. Rail thickness 0.24 inches, provide super load-bearing capacity, maximum weight capacity is 330 lbs. 2x Carbon Steel Roller. These hangers are built with our premium nylon wheels, which are often an expensive upgrade at other shops but we made these the standard wheel for all our kits, it is tested beyond 120,000 rolls, Gcr15 roller bearing, sporting a high temperature-treated surface coated with black powder for added durability, enable to use for years, providing a quiet and smooth sliding experience. With bolts and the spacers,, the rail can be securely attached to the studs (or header board) and can hold 330 lbs comfortably. We also provide extra carriage bolts and wood anchors for concrete wall. Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and prevent the door from rolling of the edge of the rail, and they’re cushioned by spring caps for a quiet close, reduce vibration and noise during opening and closing the door, and extend the life of the kit. A T-shaped floor guide is supplied with anchors to prevent the door from swinging out or up against the baseboard. A groove needs to be pre-slotted on the bottom of the door panel. Those little round discs- go on top of the door is used to protect the door from touching the rail when sliding the door. Fit Door Panel Width. Fit Door Panel Thickness. 1 3/16″ to 2″(3cm-5cm). 17.56 x 4.88 x 3.03 inches. Product Dimensions: 4.88 inches x 17.56 inches x 3.03 inches. Weight: 330.0 lb. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Your satisfaction is guaranteed! All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. We will work with you to resolve any problem you may have.

Subscribe to our Newsletter. Baldwin PD005151PASS – Pocket Door Hardware Locks Sliding Door Hardware. Santa Monica Passage Pocket Door Set with Door Pull from the Estate Collection Product Specifications. Cutout Depth: 0.25 in. Cutout Height: 6.2 in. Cutout Width: 1.5 in. Depth: 0.25 in. Door Thickness: 1-1/2″, 1-3/4″, 1-3/8″, 1-5/8″, 2″, 2-1/2″, 2-1/4. Height: 8.3 in. Width: 2.3 in. Configuration: Pocket Door Lock. Handing: Left, Reversible, Right. Approved for Commercial Use: No. Collection: Estate, Estate Pre-Configured. Where possible, we note damage and list missing accessories. These factors are reflected in the pricing of the item. Simply send us a message, and a resolution will be quick to follow.