Sliding Door Hardware
TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

TL Flat Design Sliding Bypass Double Barn Door Hardware

Premium Material-We have changed the materials for our floor guides and stoppers. The floor guide and the stopper we include are made out of steel. Easy To Install-Detailed installation manual included. You will find out it is not so hard to build up the sliding barn door hardware by yourself. Hardware works with doors of 1-1/4″ to 1-3/4″ Thickness. 150-200 Ibs each door. The hardware kit is for two door panel can be used with two 30 width doors. The space you need from the top of the door to the ceiling should be greater than. Only the hardware kit is for sale. Door panel is not included. Customer will be offered wooden wall screws and concrete wall screws. Full set kit suitable for door panel thickness: 35-45mm. The gap between THK 40mm door panel and the wall is about 16mm form the top of the door. In the modern home improvement, barn door hardware is commonly used in the decorating of kitchen, bathroom and other areas with high utilization rate. Barn door is sliding over the surface of wall, it can save more space than ordinary doors did. The item “TL Flat Design Sliding Bypass Double Barn Door Hardware” is in sale since Friday, July 7, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “trackmax_in” and is located in Flushing, New York. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Unbranded
6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40

6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40

6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40

6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40

6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40

6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40

6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40

6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40

6.6ft Heavy Duty Sturdy Sliding Barn Door Hardware Kit -Smoothly and Quietly -Easy to install -Includes Step-By-Step Installation Instruction Fit 36″-40″ Wide Door Panel (I Shape Hanger). This hardware kit are provided along with a completely turnkey experience. SIMPLE AND EASY TO INSTALL: Professional instruction and team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team. PACKAGE INCLUDED: A Barn Door Hardware Kit 2x 3.3FT Rails, 5x Rail Spacers, 2x Rollers, 2x Door Stops, 2x End Caps, 1x Floor Guide, 1x Hex Key; All other necessary hardware is included as you see in the pictures. For 16 inch stud. DOOR WEIGHT CAPACITY: 220 lb, Fit door panel width: 36″-40″, Fit door panel thickness: 1 3/8″ and 1 3/4″. RIGHT CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door. Q: How to ensure the stability and safety of the door? Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close. A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard. Those little round discs- go on top of the door and won’t allow door to be lifted off rail unless they’re turned. Q: When do you need a headboard? If the studs don’t line up with the pre-drilled holes in the rail. If there is a doorway trim. Q: How much space do I need above the doorway? A: You will need a minimum of 5 from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: How thick of a door will this kit work with? A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8″ to 1 3/4″, but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below. 2”- door depth – trim depth. If your answer is 0 or greater, then you’re fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board. The item “6.6ft Sliding Barn Door Hardware Kit Smoothly and Quietly Wide Door Panel 36-40″ is in sale since Thursday, September 3, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “gtspro55″ and is located in United States. This item can be shipped to United States.
  • Color: Black
  • Model: Does Not Apply
  • Brand: Branded
  • UPC: 744110756029
  • ISBN: Does not apply
  • EAN: 0313057173192
  • MPN: Does not apply
  • Size Name: 6.6 Feet
  • Suitable For: Panel Door
  • Type: Installation Kit
  • Material: Wood
  • Style: Modern