6.6 FT Top Mount Sliding Barn Door Hardware Kit Whole Set, Include 1 Pull Handle & 1 Floor Guide, Fit 40 Wide Doorpanel(T Shape Hanger). Why choose us: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit is provided along with a completely turnkey experience. Simple and easy to install: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a Carpenter or decoration team. Package included: A Barn Door Hardware Kit 2×3.3FT Rail, 5x Rail Spacer, 2x Roller, 2x Door Stop, 2x End Cap, 1x Floor Guide, 1x Hex Key, 1x Door Handle, all other necessary hardware is included as you see in the pictures. Door weight capacity: 220 lb, Fit door panel width: 40″, Fit door panel thickness: 1 3/8″ and 1 3/4. Right choice for your house: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door. If the studs don’t line up with the pre-drilled holes in the rail. If there is a doorway trim, and “door depth” plus “trim depth” is greater than 2”. [door depth + trim depth -2]. Is the extra spacing you need. This extra spacing is accomplished by add a header board to the studs, and install rail in header board. Slide along the rail and tighten down at any point you like to stop the door, cushioned by rubber caps for a quiet close. Supplied (with anchors) to prevent the door from swinging out or up against the baseboard. Those little round discs- go on top of the door and won’t allow door to be lifted off rail unless they’re turned. A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8″ – 1 3/4″, but this can be easily navigated by countersinking the bolt head into the back side of the door, or replace it with 4 longer bolts from local hardware store. 6.6FT Whole Set [Single Door]. 42 x 6.6 x 2.8 inches. Product Dimensions: 6.6 inches x 42.0 inches x 2.8 inches. Weight: 16.9 lb. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Your satisfaction is guaranteed! All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. We will work with you to resolve any problem you may have.

All of our products comply with strict quality control and advanced technology makes CCJH Sliding Barn Door Hardware more reliable. Material: Carbon Steel Door weight capacity: 220lbs Sliding Length: 4ft-16ft for your choose The top of the Doors to the ceiling : Min distance is 6.7″ Suitable Door Panel Thickness: 1 1/4″ to 1 7/8 inch. 1Adjustable Roller hanger screws(from 3cm to 5cm), You can adjust the screw to the most suitable thickness for your door 2Rubber accessoriers & Spring door stops, has buffering effect when sliding door, reduce noise. For Bypass 2 Door. 1 Pre-Drilled Spliced rails 2 2 x Rollers 3 Wall Hanger Set (1 rail hole need 1 set) 4 2 x Door Stops 5 4 x Adjustable roller screws 6 2 x anti-jump blocks 7 1 x floor guide. 8 Bypass brackets (1 rail hole need 1 set) Note: Only the sliding door kit for sale, door is not include. How to choose track size. 2 doors just slide on the opening space, and cannot be put away to the near wall, Track size= 2 × Single Door Width. 2 doors overlapped onto each other can be slid to the one side wall, Track Size= 3 × Single Door Width. 2 doors can be slid on the either sides wall, Track size= 4 × Single Door panel Width. Any questions please tell us, Our customer service will help you within 24 hours.