5ft Big Spoke Wheel Sliding Barn Door Hardware. Hardware only, not including door panel. Full set kit including: Big wheel2, Stopper2,5FT Track1, Floor guide1, Anti-pad2;Track&wall connector4. If the frame thicker than 1/2, remove the frame mouldings to minimize door undercut. If you do not remove them, use extra spacers(not included) or install a piece of wood (not included) of the same thickness and length as the mouldings before installing the new hardware to ensure door undercut. Do not install directly onto drywall or other hollow wall. Such surfaces are not strong enough to support the total active weight of the track and door. Every fastener used to attach the track to the wall must be fastened securely into a structural surface. The height from top of the door to the top of the roller is 7 3/8, pls check if your wall have enough space to install this kit before order! The gap between door and wall is 16/25″, if you have thick(thickness more than 1/2″) baseboard or door frame, pls try to add a wood board on the back side of the track to make a bigger gap. Drill holes on the door panel. First center hole to the top of the door:1-9/16. Center length between two holes:3-9/16. Door panel need cut a groove for floor guide. Only hardware for sale, Door panel is NOT included. Materials: Steel, POM -Colour: Black. Suitable for door thickness:35-40-45mm; -Can bear MAX weight 90kg -Track had been pre-drilled 16(406mm) apart holes -Track’s two end had been pre-drilled small holes for track connector to make a long track. The height from top of the door to the top of the roller is 188mm(7 2/5), pls check if your wall have enough space to install this kit before order! -The gap between door and wall is 16mm(16/25″), if you have thick(thickness more than 1/2″) baseboard or door frame, pls try to add a wood board on the back side of the track to make a bigger gap -Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall -Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/10″. 5FT/5.5FT single door kit. 5FT/5.5FT Sliding track:1pcs. 6FT/6.6FT single door kit. 6FT/6.6FT Sliding track:1pcs. 8FT single door kit. 8FT Sliding track:1pcs. The kit is oversize, so we can not offer overnight service, pls kindly understanding. The item “DIYHD Vintage Strap Industrial Wheel Sliding Barn Wood Door Hardware Track Kit” is in sale since Thursday, April 28, 2016. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Carol Stream, Illinois. This item can be shipped to United States.

• Country/Region of Manufacture: China
• Material: STEEL
• Featured Refinements: Barn Door Track
• Country//Region of Manufacture: China
• Type: Sliding Door Track
• Brand: DIYHD