Surface: Black frosted, corrosion protection. Main Material: High quality carbon Steel. If you have any other ideas, please advise. Door panel thickness: 35/40mm. Door Max Weight: 250lbs. Ocasion: Kitchen, dinning room, bedroom, coffee bar, farm, etc. 5FT-16FT Track fit for door opening: 30inch – 96inch. Customers will be offered both wooden wall screws and concrete wall screws. Track’s length should be twice of your door panel’s width, please select the length based on the door panel or opening. The gap between THK 40 mm door panel and the wall is about 16 mm, height from the top of the door panel to the top of the roller is about 130 mm for reference. Only the hardware is for sale. Door is not included. International buyers please note. These charges are buyers responsibility. Customers should contact our Customer Department within 30 Days after receiving the item. During the period we would like to accept return in the following cases: such as goods are in good condition and don’t affect secondary sales, quality defects or other problem. Customers’ issues such as: no longer needed, don’t like, bought by mistake, etc. Our staff will do unpacking and inspection for your return goods ASAP. Thanks for your patience and cooperation. The item “4/9/11/14FT Soft Close Sliding Barn Door Hardware Track Kit Indoor Outdoor Rail” is in sale since Tuesday, May 21, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “saledecoration” and is located in CA. This item can be shipped worldwide.
- Featured Refinements: Sliding Barn Door Hardware
- Bundle Listing: No
- Special Offer: Free Shipping
- Country/Region of Manufacture: United States
- MPN: Does Not Apply
- Brand: winsoon
- Color: Black
- Feasure: interior sliding barn door hardware
6.6FT Top Mount Rolling Barn Door Hardware. Only Hardware for sale, Door panel and decoration nails are NOT included. Easy for installation, the black powder-coated steel hardware has a versatile look that is perfect for any interior space. 6.6ft hardware including. 6.6FT track1+Track&wall connector5. The top mount roller kit has a big gap between door and wall(about 1), which can be used for thick frame openning. The height from top of the door to the top of the roller is 120mm(4 7/10″), please at least 130mm(5″) for installation. The gap between door and wall is 28mm(1″) based on door thickness 40mm(1 4/7″). Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/5″. 8FT track had been pre-drilled 16 apart holes. Suitable for door thickness 35-45mm(1 2/5-1 4/5). 8FT track kit can be used for door width up to 48. Surface:Powder coated black. 6FT/6.6FT Full set hardware including. 8FT Single Door Kit Including. 8FT Double Door Kit Including. 10FT Double Door Kit Including. 12FT/13FT Double Door Kit Including. How to install barn door hardware. Step1:Prepare door panel and hardware. Door panel pre-cut groove. Prepare gasket or wooden board/thick spacer if you have thick frame/baseboard. Step2:Drill 16 apart holes on the wall. The height of the place where drill hole is door height +43mm(1 11/16). Double check the level then tight the track on the wall with spacer. Step3:Dill holes on the door and tight the roller, than hang door panel on the track. Step4:Fix the Anti-pad on the top of the door. The anti-pad can reduce the gap between door and track to make full system safety. Step5:Install floor guide on the bottom of the door. Step6:Install stops on two sides on the track. The item “DIYHD Top Mount Steel Barn Wood Interior Closet Door Sliding Track Hardware” is in sale since Monday, October 15, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream, Illinois. This item can be shipped to United States.
- Country/Region of Manufacture: China
- Material: STEEL
- Type: Sliding Door Track
- Brand: DIYHD