This motor powered sliding gate opener is the answer if you are looking for extra security and convenience for your home or business property. Featuring a powerful 750W motor designed for heavy duty use, it is capable of powering gates with a maximum weight of 2000kg! Using advanced technology, this gate opener is equipped with a anti-bump design and automatic limitation to accommodate your needs. To enhance safety and convenience, there is an manual opening design so you will still be able to close the door in case of power failure. If you have simply forgotten about closing your gate, the built in auto-close function (adjustable in ranges of 0-90 seconds) will certainly back you up. The motor powered sliding gate opener is the essential item for a safe and convenient powered gate for your property. Temperature protection, when the temperature is too high, the motor will cut off the power automatically to protect itself. When the door reaches route, only press the button in the opposite direction, the motor will work to avoid the risk that the door runs out of the track. The motor is equipped with opening and closing limiter. When the door reaches the limited position, the motor stops working, increasing security. The automatic closing time can be set in 0-90 seconds. Equipped with infrared sensor probe, it can realize rebound function when encountering resistance, avoiding accident and increasing security. The key can be used to open the clutch box on the machine when the power is off, and the door can be closed manually. It is suitable for the courtyard door, villa gate, adaptation of translation door and so on. Condition: 100% Brand New. Maximum Application Weight: 1200kg/2000kg. 27.4 19.8 33cm / 10.8 7.8 13.0inch. Set 2: 1 Motor. The item “Gate Opener Hardware Door Operator Kit Automatic Sliding Driveway Security Motor” is in sale since Sunday, October 7, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Garage Doors & Openers\Opener Systems”. The seller is “globedealfield” and is located in California. This item can be shipped to United States.

• Brand: Unbranded
• MPN: Does not apply
• Country/Region of Manufacture: Hong Kong
• Material: Metal
• Power: 550W / 750W
• Working Voltage: 220-230V/50Hz
• Waterproof Grade: IP44
• Working Current: 3A
• Motor Speed: 1400r/min
• Output Torque: 26NM /23NM
• Operating Speed: 12m/min
• Working Environment: 25-55

DIYHD 6FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware one Piece Easy Install Bypass Bracket kit. Full detail Bypass system require high space(at least 10) from top of the door to the ceiling, pls check your openning space before order. The gap between two doors are 2″ based on the door thickness40mm(1 3/5″) , we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/10″;Height 1″) , pls let your door maker finish this job when you order the door. Hardware info Material:Steel, POM Surface:Brushed Nickel Full set hardware including: Roller4pcs Stopperpcs Track&Wall; Spacer10pcs Bypass bracket5pcs Iron Floor guide2pcs Anti-pad4pcs 6FT track2pcs More Technical Detail 6FT track is one piece track and pre-drilled 16″ apart holes Can be used for studs wall that length between two studs are 16″ 6FT track kit can be used for door width up to 36 Track’s two ends had pre-drill holes to combine two track together to creat 12ft 4 door bypass system. Easy installation for non wooden frame around openning If baseboard/wooden frame thickness less than 3/5, easy installation as photo 1 left side If baseboard/wood frame thickness more than 3/5, please add a thick gasket or wooden board on the back side of the track as photo 2 How to install bypass bracket How to install barn door hardware: Step1:(Inner door) Drill holes on the wall H is door panel’s height, H+43MM(1-7/10) is the place we need drill holes for track to tight screws. Step2: Adjust stop’s location, then tight the track on the wall with spacers. Step3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4: The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5: Hang wheels on the track. Step6: Bypass bracket’s waist-shaped hole is on same leve as inner track, so aim the waist hole at inner track’s hole to find 2 upper holes location on the wall. Drill holes on the wall, and tight screws. Step7:Fix outter track on the bypass bracket with spacers. Step8:Hang outter door on the track and tight anti-pad Step9: Install floor guide on the floor under the groove of the door panel. Make sure this fits. By entering your model number. Hardware Only, Not including Door Panel. Material:Steel/POM;Surface:Brushed. Hardware suitable for door thickness 40-45mm(1.57″-1.77″). Pre-drilled 16 apart holes on track, Two rollers can bear MAX weight 90kg. Roller4;Stopper4;6FT Track2;Track&wall connector10;Bypass bracket5;Floor guide2;Anti-pad4. Part Number: BN04-6FT BP. Item Weight: 43.1 pounds. Product Dimensions: 72.8 x 7.9 x 7.9 inches. Size: 6ft bypass kit. Item Package Quantity: 1. Maximum Weight Capacity: 198 Pounds. Date First Available: February 8, 2017. In regards to order cancellation requests, we will do our best to accommodate your request but we cannot guarantee that these request will always be granted. Do you need your item quicker than that? We are not responsible for any incorrect or undeliverable addresses. Open software, music, games, movies, food items (human or pet, opened or closed), and personal hygiene products are not eligible for return. Message us for return instructions. Do you have a question about an item or order? Invoices or special request are not guaranteed. We do not accept best offers on any items we sell. We would love to be given the opportunity to work with you to resolve any problem you may have. The item “DIYHD 6FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware one” is in sale since Sunday, September 9, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “buyagain” and is located in United States. This item can be shipped to United States.

• Size Name: 6ft bypass kit
• Batteries Required?: No
• Finish: Brushed
• Date First Available: February 8, 2017
• Shipping Weight: 43.1 pounds
• Item Package Quantity: 1
• Part Number: BN04-6FT BP
• Color: Brushed
• Product Dimensions: 72.8 x 7.9 x 7.9 inches
• Material: Steel
• Item Weight: 43.1 pounds
• Batteries Included?: No
• Maximum Weight Capacity: 198 Pounds
• Size: 6ft bypass kit
• MPN: BN04-6FT BP
• Brand: Generic