ONLY HARDWARE, NO DOOR PANEL. 10FT Double bi-parting barn door sliding track kit. The U rail holders make this system very easy to install, it also allow us to adjust the place where to fix the holder. (most suitable for drywall+studs). Track’s length should be twice of the door panel. The height from top of the door to the top of the roller is about 4.72. Full set hardware’s including. Roller:4pcs Stopper:4pcs Sliding rail:2pcs5ft(1.5m). It maight need about 10-15 days for you to receive the goods. After sale service: If you find any missing or damage on the products pls take me outer package photo and demaged products photo ASAP, we will try our best to solve it. We are not sure each country’s law, so we can’t point out how much you need to pay. The item “10ft double sliding barn door hardware stainless steel barn track for drywall” is in sale since Wednesday, December 23, 2015. This item is in the category “Antiques\Architectural & Garden\Barn Doors”. The seller is “sliding-barn-door” and is located in zhejiang. This item can be shipped worldwide.

• Color: brushed
• Maker: DIYHD
• Material: stainless steel 304

Black barn door hardware. Brushed barn door hardware. Hardware Only, Not including Door Panel -Material:Steel; -Color:Black. Bypass system require high space(at least 11 13/20) from top of the door to the ceiling, pls check your openning space before order. The gap between two doors are 2″ based on the door thickness40mm(1 3/5″) , we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reeduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall -The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/5″;Height 1″) , pls let your door maker finish this job when you order the door. 5ft/5.5ft bypass kit including. 8ft bypass kit including. “Extra roller kit” including: (only for customer who want to hang third door panel on track) 2pcs Roller with bolts 1pcs floor guide 2pcs anti-pad. 6ft/6.6ft bypass kit including. 10ft bypass kit including. 5FT Track4+Track connector2(combine two 5ft track to be 10ft). Prepare door panel and hardware Door panel pre-cut groove, Groove Height:1″Width:3/5″ Prepare gasket or wooden board/thick spacer if you have thick frame/baseboard. Step1:Drill holes on the wall; H is door panel’s height, H+43MM(1 7/10) is the place we need drill holes for innner track. Step2:Double check the level of the holes, then tight the inner track on the wall with spacer. Step3:Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4:The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5:Hang wheels on the track. Step6: There are 2 “L” bypass bracket, the 3-hole L is connector with outter track, 4-hole L is tight on the wall. First, fix two L brackets together with bolts. Second, put the whole bracket on the wall to find the hole on the wall for 4-hole bracket, then tight the screws(The 3-hole bracket is on same level with the inner track) Third, fix the outter track/spacer together with the 3-hole bypass bracket to get outter track installed. Step8:Fix the anti-pad on the outter door Step9:Install floor guides under the door panel groove. Step10:Fix stops on the end of the track. The kit is oversize, so we can not offer overnight service, pls kindly understanding. 8/10/12ft Industrial Wheel Double Sliding Barn Wood Door Track Hardware. DIYHD Two side Soft close Barn Door Hardware Big Spoke Wheel Barn Door Track Kit. 8ft Sliding barn door wood door hardware rustic black barn sliding track. Stablest Spoke Wheel One Piece Bypass bracket Sliding Barn Wood Door Hardware. Stainless Steel Rustic Black Sliding Barn Door Handle Wood door handle and pull. The item “DIYHD 5ft-10ft Rustic black bypass double sliding barn door hardware bypass kit” is in sale since Thursday, August 06, 2015. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Carol Stream,IL. This item can be shipped to United States.

• Brand: DIYHD
• Country/Region of Manufacture: China
• Model: BYPASS
• Color: Black
• Featured Refinements: Sliding Barn Door Hardware