Sliding Door Hardware
DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

The height from top of the door to the top of the roller is 130mm(5 3/25″), please at least 150mm(6″) for installation. The gap between door and wall is 16mm(16/25″) based on door thickness 40mm(1 4/7″). Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/10″. 5FT/5.5FT Full set hardware including. 5FT(150m)/5.5FT(1.7m) track:1pcs. 6FT/6.6FT Soft Close Kit Including. Not including other hardware. 5FT track is one piece track and pre-drilled 16 apart holes. Can be used for studs wall that length between two studs are 16. 5FT track kit can be used for door width up to 30. The T trigger may not hit with plastic soft close piece we pre-fixed on the track! Easy installation for non wooden frame around openning. If baseboard/wooden frame thickness less than 3/5, easy installation as photo 1 left side. If baseboard/wood frame thickness more than 3/5, please add a thick gasket or wooden board on the back side of the track as photo 2. How to install barn door hardware. How to install barn door hardware: Step1: Drill holes on the wall H is door panel’s height, H+45MM(1.77) is the place we need drill holes for track to tight screws. Step2: Adjust the soft close mechanism’s location to make two teeth visiable from the front side of the track(see step 7 on the photo manuel), then tight the track on the wall Step3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4: The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5: Hang wheels on the track. Step6: Install floor guide on the floor under the groove of the door panel Step7: Move two soft close mechanism’s teeth like option 1 Close the door, tight the T trigger on the bottom of the mechanism’s teeth. Open the door, tight the T trigger on the bottom of the mechanism’s teeth. Step8: Mount two stops of the two end of the track. The item “DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism” is in sale since Monday, October 8, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream,IL. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: STEEL
  • Type: Sliding Door Track
  • Brand: DIYHD
DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware One Piece Easy Mount Bypass Bracket. Hardware Only, Not Including Door Panel. Fit door thickness:13/8″1 3/4″. 2 rollers can hold 1 door MAX weight 198lbs. Pre-drilled 16 apart holes. Track’s two ends had pre-drill holes to combine two track together to create 10ft 2 door bypass system. Easy installation for non wooden frame around opening. If baseboard/wood frame thickness more than 3/5 or pre-drilled holes do not line up with studs, please add a wooden board on the back side of the track. Full set hardware including. 5FT Track4pcs + Track connector2+Track&Wall Connector16+ Bypass bracket8. Bypass system require high space(at least 10) from top of the door to the ceiling, pleases check your opening space before order. The gap between two doors are 2″ based on the door thickness 40mm(1 3/5″) , we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than opening(opening/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/10″;Height 1″) , pleases let your door maker finish this job when you order the door. How to install bypass bracket. How to install barn door hardware: Step 1:(Inner door) Drill holes on the wall H is door panel’s height, H+43MM(1-7/10) is the place we need drill holes for track to tight screws. Step 2: Adjust stop’s location, then tight the track on the wall with spacers. Step 3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step 4: The round dics are anti-pad, they can reduce the gap between door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step 5: Hang wheels on the track. Step 6: Bypass bracket’s waist-shaped hole is on same leve as inner track, so aim the waist hole at inner track’s hole to find 2 upper holes location on the wall. Drill holes on the wall, and tight screws. Step 7:Fix outter track on the bypass bracket with spacers. Step 8:Hang outter door on the track and tight anti-pad Step 9: Install floor guide on the floor under the groove of the door panel. The item “DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware” is in sale since Thursday, September 5, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “beileli_0″ and is located in PA. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • MPN: BN04-10FT 2 Doors Bypass
  • Material: Stainless Steel
  • Brand: DIYHD
  • Type: Bypass Hardware
6.6FT Satin Nickel Sliding Barn Door Hardware Roller Track Rail Kit

6.6FT Satin Nickel Sliding Barn Door Hardware Roller Track Rail Kit

6.6FT Satin Nickel Sliding Barn Door Hardware Roller Track Rail Kit

6.6FT Satin Nickel Sliding Barn Door Hardware Roller Track Rail Kit

6.6FT Satin Nickel Sliding Barn Door Hardware Roller Track Rail Kit

6.6FT Satin Nickel Sliding Barn Door Hardware Roller Track Rail Kit

Decorative Spoke Wheel barn door hardware system features 2 top mounted brackets to hang wood door on a traditional rail track. Wheels provide excellent strength and durability as well as smoothness of travel along the rail. Satin nickel brushed finish. Package Includes: (1) 6.6ft one-piece rail which is made of carbon steel, provides a smooth and sturdy rolling performance. (5) Spacers, used to keep space between the wall and the rail. (2) Rollers, made of carbon steel hanger and nylon wheel with ball bearing makes your door moving stably and in low noise. (2) Door Stops, used to adjust and control the rolling distance. (1) Floor Guide, to prevent door from shifting, door bottom groove is required. (2) Anti-jump discs prevent hanger wheels from jumping off the track. (1) Hex tools and all hardware fasteners. (1) Easy installation instruction. All parts tested with salt water spray. The length of rail should be at least twice of width of door panel. The space between door top and roller top is 7-5/16 inch, Please leave enough space from your ceiling. In case of directly mounting on wall, the final gap between door and wall is about (5/8″ to 11/16″) which depends on door thickness. Only the hardware is for sale. Rail can be cut to any length. Before install, Measure your door height, door trim(if available) and bottom groove, Leave appropriate gap for your floor guide. This kit is probably Not for door trim or door casing, otherwise you may need a header(a solid wood board) for enough clearance. Your advice is welcome at any time. The item “6.6FT Satin Nickel Sliding Barn Door Hardware Roller Track Rail Kit” is in sale since Monday, August 6, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “barndoorfactorydirect” and is located in Plainfield, Indiana. This item can be shipped to United States.
  • Featured Refinements: Sliding Barn Door Hardware
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Material: Steel
  • Bundle Listing: No
  • Non-Domestic Product: No
  • Type: Sliding Door Track
  • MPN: TY-TSQB05SN-C-2-a
  • Brand: JUBEST
DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft

DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft

DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft

DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft

DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft

DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft

DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft

DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft closing mechanism. Hardware Only, Not including door panel. Material:Steel, Nylon, POM;Surface:Brushed Nickel. Two side soft close operation;The track had been pre-drilled 16” apart holes;Track’s two end had been pre-drilled small holes for track connector to make a long track. Package’s including:Wheel2, Stopper2, Track1, Track&wall connector6, Floor guide1, Anti-pad2;Soft close kit2. Suitable for door thickness:35-40-45mm;Soft close kit can bear MAX weight 80kg. 7.87 x 98.43 x 3.94 inches. The item “DIYHD 8FT Soft Closing Brushed Nickel Sliding Barn Door Hardware Two-side soft” is in sale since Thursday, February 15, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “trustedkiwi” and is located in US. This item can be shipped to United States.
  • Brand: DIYHD
  • MPN: BN04-8FT Soft
  • Model: BN04-8FT Soft
5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel

Surface: Wire drawing technology, manufactured by integral moulding. Main Material: High quality 304 Stainless steel, high corrosion resistance, sturdy & durable & anti-corrosion 3. Door panel thickness: 35/40mm 2. Door Max Weight: 250lbs 3. Ocasion: Kitchen, dinning room, bedroom, coffee bar, farm, etc. Track’s length should be twice of your door panel’s width, please select the length based on the door panel or opening. Height from the top of the door panel to the top of the roller is about 130 mm for reference, leave at least 150mm for installation 3. Only the hardware is for sale. Door is not included, please. International buyers please note: a. Customers should contact our Customer Department within 14 Days after receiving the item. During the period we would like to accept return in the following cases: such as goods are in good condition and don’t affect secondary sales, quality defects or other problem. Customers’ issues such as: no longer needed, don’t like, bought by mistake, etc. Our staff will do unpacking and inspection for your return goods ASAP. Thanks for your patience and cooperation. The item “5FT-16FT Stainless Steel Sliding Barn Door Hardware Tube Set Brushed Nickel” is in sale since Friday, June 14, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “saledecoration” and is located in CA. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: winsoon
  • Featured Refinements: Sliding Barn Door Hardware
Vintage 1920's Era Nickel over Bronze French Door Slide Bolt Sets

Vintage 1920's Era Nickel over Bronze French Door Slide Bolt Sets

Vintage 1920's Era Nickel over Bronze French Door Slide Bolt Sets

Shown is one of several sets of vintage nickel plate over bronze French door slide bolt sets we have at the time of posting. These sets were made for taller 84″ doors: long (for the top of the door) is 18 1/2″, short (for the bottom) is 9 1/2. Can be polished for a shinier look. If you need the top one shorter, it can be cut down to the desired size. The item “Vintage 1920′s Era Nickel over Bronze French Door Slide Bolt Sets” is in sale since Saturday, June 15, 2019. This item is in the category “Antiques\Architectural & Garden\Hardware\Locks, Latches & Keys”. The seller is “coolstuff-is-coolstuff” and is located in Toledo, Ohio. This item can be shipped to United States.
  • Decade: 1920s
  • Material: Bronze
  • Original/Reproduction: Antique Original
  • Color: Silver
5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel

HARDWARE ONLY, DOOR NOT INCLUDED. Track’s length should be twice of the door panel. 6.6ft track — no more than 3.3ft door panel. Two Rollers Can bear MAX weight:90kg. Full set kit suitable for door panel thickness:35mm-45mm. Pre-drilled 16″ or 17.7″holes on the track. 5ft/6ft/6.6ft are single door kit. 5 FT kit’s including. 6 FT kit’s including: Basic Roller:2pcs Stopper:2pcs Sliding track:1pcs6FT Track&wall connector: 5pcs Anti-pad:2pcs Floor guide:1pcs Installation manual:1pcs. 6.6 FT kit’s including. Sliding track:1pcs6.6FT. 6.6ft – 13.2ft double door kit are kit to hang bi-parting two door panels. 6.6FT double door kit’s including. Sliding track: 1pcs6.6FT. 10 FT double door kit’s including. Track to Tack connector :1pcs. 12 FT double door kit’s including. 13.2 FT double door kit’s including. Sliding track: 2pcs6.6FT. Other countries will be offered concrete wall screws if you didn’t mentioned anything after you placed the order! All of my price. To canada may course CAD 15-30 for reference. To European country may course EUR 35-50 for reference. For detailed cost, pls kindly ask your local custom. The item “5-13FT Top Stainless Steel Sliding Barn Door Hardware Tube Kit Brushed Nickel” is in sale since Sunday, June 11, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “homedecor_a” and is located in , . This item can be shipped worldwide.
  • Brand: Unbranded
  • MPN: STA01
  • Country/Region of Manufacture: China
  • Featured Refinements: Sliding Barn Door Hardware
DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit

The height from top of the door to the top of the roller is 188mm(7 2/5), pls check if your wall have enough space to install this kit before order! The gap between door and wall is 16mm(16/25″), if you have thick(thickness more than 1/2″) baseboard or door frame, pls try to add a wood board on the back side of the track to make a bigger gap. The MAX load for basic item is 90kgs. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. Two sides of the track’s end also pre-drilled small screw holes for customer who what to creat double sliding barn door system. Hardware Material:Steel, Nylon, POM. The J shape material is metal. The spoke wheel is hard plastic/nylon. All of our barn door wheel is hard plastic to reduce the noice during sliding. 5ft-single door kit including. 6ft/6.6ft-single door kit including. 10ft-single door kit including. The item “DIYHD Brushed Nickel Industrial Spoke Wheel Steel Sliding Barn Door Hardware Kit” is in sale since Monday, September 3, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “beileli_0″ and is located in PA. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: STEEL
  • Brand: DIYHD
  • Type: Sliding Door Track
Sliding Door Lock Hardware 2-Panel Gliding Patio Satin Nickel Handle Reversible

Sliding Door Lock Hardware 2-Panel Gliding Patio Satin Nickel Handle Reversible

Sliding Door Lock Hardware 2-Panel Gliding Patio Satin Nickel Handle Reversible

Sliding Door Lock Hardware 2-Panel Gliding Patio Satin Nickel Handle Reversible

Sliding Door Lock Hardware 2-Panel Gliding Patio Satin Nickel Handle Reversible

Sliding Door Lock Hardware 2-Panel Gliding Patio Satin Nickel Handle Reversible. Andersen Anvers 2-Panel Gliding Patio Door Hardware Set in Satin Nickel. Update the look of your Andersen gliding patio door with Anvers hardware. Anvers hardware provides a contemporary shape with a sleek urban feel. Coordinate with other features in your home, such as lighting, cabinetry hardware and other decorative fixtures. Satin nickel finish, other finishes available. Made of solid, forged brass. Hardware set includes inside and outside handles, inside thumb latch, reach out lock, receiver, cover plate, screws and installation instructions. Compatible with 2-panel Andersen frenchwood gliding patio doors, perma-shield gliding patio doors and narroline gliding patio doors. Fits right-handed and left-handed patio doors. If purchasing a complete patio door, this is part 5 of 5. Center to center measurement in. : 8.5 Grip height in. : 6.0 Grip width in. : 0.5 Maximum door thickness in. : 1.5 Product Depth in. : 3.0 Product Height in. : 9.5 Product Width in. : 10.5 Projection in. : 2.0 Width: 7.75 Builders Hardware Product Type: Window Handle Commercial/Residential: Residential Door Handing: Universal/Reversible Door Lock Style: Modern Door Locks & Knobs Product Type: Sliding Door Locks Features: No Additional Features Finish: Satin Nickel Handle Material: Metal Hardware Finish Family: Nickel Hardware Included: Yes Included: Hardware, Installation Instructions Interior/Exterior: Interior/Exterior Lockable: Yes Material: Metal Minimum door thickness in. : 1.5 Package Quantity: 1.0 Product Weight lb. Thanks for choosing us! We strive to deliver top notch service. If you are unsatisfied with your order in any way. Before leaving negative or neutral feedback. We will make every effort for 100% satisfaction. We know how important it is for you to get what you ordered and get it fast. Our products are a 100% authentic and brand new. We work with the biggest suppliers of high quality products to bring you only the best items. We consider it a top priority that our customers are happy and in the rare event that they are not, we do everything we can to fix the situation. No customer will walk away from our store unhappy. If there’s a problem, just let us know and we fix it. We guarantee you only the best experience when shopping with us! Our stock all ships from our US-based warehouses. Only factory defects are accepted as a reason for a return. In the case of factory defects, we will replace the product for you When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. These products are manufactured according to the specifications of the US Electrical Standards and codes. We assume no responsibility if the item malfunctions or causes an accident because you tried to use the product with foreign electrical standards. The Use with a converter or other voltage transforming device is AT YOUR OWN RISK. See our other items. Andersen Anvers 2-Panel Gliding Patio Door Hardware Set in Satin Nickel Item Description Update the look of your Andersen gliding patio door with Anvers hardware. –Satin nickel finish, other finishes available —Made of solid, forged brass —Hardware set includes inside and outside handles, inside thumb latch, reach out lock, receiver, cover plate, screws and installation instructions —Compatible with 2-panel Andersen frenchwood gliding patio doors, perma-shield gliding patio doors and narroline gliding patio doors —Fits right-handed and left-handed patio doors —If purchasing a complete patio door, this is part 5 of 5 Center to center measurement in. : 2.0 Width: 7.75 Builders Hardware Product Type: Window Handle Commercial/Residential: Residential Door Handing: Universal/Reversible Door Lock Style: Modern Door Locks & Knobs Product Type: Sliding Door Locks Features: No Additional Features Finish: Satin Nickel Handle Material: Metal Hardware Finish Family: Nickel Hardware Included: Yes Included: Hardware, Installation Instructions Interior/Exterior: Interior/Exterior Lockable: Yes Material: Metal Minimum door thickness in. The item “Sliding Door Lock Hardware 2-Panel Gliding Patio Satin Nickel Handle Reversible” is in sale since Tuesday, October 16, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “pfcwills” and is located in Flushing, New York. This item can be shipped to United States.
  • Brand: Andersen
  • MPN: 2565541
  • Model: 2565541
  • UPC: 0716289075447
  • EAN: Does not apply
Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory

Sliding Door Handle Set, Satin Nickel, 1-3/4 in. Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory. This sliding door handle set is constructed from diecast and comes in a satin nickel finish. It features an easy to install non-handed design. This handle set fits most mortise lock systems. Fits most mortise lock systems. Center to center measurement in. Builders Hardware Product Type. Goods are warranted against defects in manufacturing for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. The item “Prime Line Sliding Patio Door Pull Handle Set Satin Nickel Hardware Accessory” is in sale since Thursday, May 11, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Door Knobs & Levers”. The seller is “qualities4less” and is located in San Gabriel, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Bahamas, Viet nam, Uruguay.
  • Brand: Prime Line
  • Model: C 1282
  • MPN: C 1282
  • Color: Satin Nickel
  • Type: Door Handle
  • Door Type: Sliding Door