Zekoo bard door hardware kit. Went a different direction with that doorway. Doors cannot be thicker than 1-3/4 or the kit won’t work. Because of the door overlap, your door width should be 6” wider than half of the opening width or the opening cannot be fully covered. Usual Track Length=Opening Width+1FT. Service Assurance? ZEKOO stands by you all the time. Please do not hesitate to contact our customer service team if you have any questions. If parts missing or broken, we will send you a replacement ASAP. About ZEKOO Single Track Bypass Kit? Design upgraded, only needs 6 ceiling space from top of the door to ceiling now. Better suited to smaller spaces and saves more space than side pull doors and traditional double track bypass kits. The kit has step-by-step instructions that will help you install the kit faster and easier. Why Choose ZEKOO? Black electrostatic sprayed carbon steel track, say goodbye to corrosion, rust, and scratch. Wheels are covered by nylon, bringing them great durability, vibration, and wear resistance. Bearings are made of high-purity Gcr15 steel, rigorously tested over 160,000 times, and secure the buttery smooth and quiet of the rollers when sliding. Heavy-duty Materials? Track is made from 1/4 solid high standard Q235 carbon steel. Both self-tapping and roller bolts are grade 8.8. These make our hardware kit can hold 230 lbs doors easily. Rubber covered Door Stoppers own a good buffer effect and also reduce the noise. Package List? 2 x 3FT Rail, 5 x Spacers, 4 x Rollers, 2 x Door Stoppers, 4 x Anti-jump Pad, 2 x Floor Guides, 1 x Step-By-Step Installation Manual, and some small accessories.
8.8 grade Self-tapping and roller bolt make our hardware kit can hold total 265 lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise. The big wheel is make by POM (vibration-resistance performance, good wear resistance, toughness), covered with nylon, slide very quietly.
ZEKOO Bypass Sliding Barn Door Hardware Kit, Single Track, One-Piece Rail, Double Wooden Doors Use, Flat Track Roller, Low Ceiling (6 FT Single Track Bypass). Single Track Bypass System? Upgraded One-Piece single track bypass sliding barn door hardware is low ceiling design, only need 6 inch ceiling space from top of the door to ceiling; Wall-mounted is very easy to install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space, saves more space than a side pull door and traditional double track bypass kit, can help you finish the project more quickly and easily. Why Choice Bypass Barn Door Hardware Kit? Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening – closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel’s fluency. One full piece 6ft rail and Pre-drill 16 apart hole on rail to line up standard studs. Heavy duty construction ensures safety? Material thickness up to 1/4 inch (6.3mm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold total 265 lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise. The hanger wheel surface is covered with nylon, slide very quietly. Single Track Bypass Sliding Barn Door Hardware Package include? 1 x 6FT Rail, 5 x spacers, 4 x Rollers, 2 x Door Stops, 4 x anti-jump pad, 2 x Floor Guides, 1 x Installation Manual (step by step with fractional measurements in inch, very easy to install)–Only bypass barn door hardware for sale, barn door is not include. Fit for 1-3/8″ to 1-3/4″ door panel thickness, can’t more than 1-3/4. S warehouse, any problem in using it, our professional staff in the barn door hardware field will answer questions for you in 24 hours. Use for double door 2. The opening’s two sides don’t have enough space for sliding 3. Save ceiling spacer, only need 6” from the top of your door to the ceiling 4. Door weight capacity: 200lb 5. Door thickness for: 1-3/8″ 1-3/4″(35mm45mm) 6. We are professional factory, accept custom-made 6 FT(72 inches) kit’s included Total track: 1pc6 FT Roller: 4pcs Door stopper: 2pcs Track & wall spacer(with screws): 5pcs Floor guide: 2 Sets Anti-pad: 4pcs Prompt 1. Only the hardware is for sale, door is not included 2. Track’s length should be twice of your door panel’s width (you can use the track which is a little bit longer than your opening width) 3. The gap between inner door&wall is about 5/8”, the gap between two door panels is about 1 3/16” (based on door thickness: 1 9/16”) 4. Height from the top of the door to the ceiling is about 6”. Return: 90 days return time (If you did not like it or no longer need, under situation of the product does not affect the second sale that you could return to us) 3. We will timely solve your question within 24 hours 4. If you have any other ideas, please advise, we want to do better for you. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “idavra1″ and is located in this country: US. This item can be shipped to United States.
- Color: Black
- Size: 6 Feet
- Brand: ZEKOO
ZEKOO 4 FT- 12 FT Bypass Sliding Barn Door Hardware Kit, 6 Feet, Black. Item Weight: 19.96 pounds. Package Dimensions: 72 x 5.9 x 3.2 inches. About Single Track Bypass DesignThis is single track bypass, one track hang 2 doors, the roller diameter is 2-5/8”, so the door will be have 8”-10” distance door overlap between 2 doors, so each door should be 6” wider than half the width of the opening, and the 2 rollers will be hit together when one door slide, maybe drive another door slide. Single Track Bypass System Upgraded One-Piece single track bypass sliding barn door hardware is low ceiling design, only need 6 inch ceiling space from top of the door to ceiling; Wall-mounted is very easy to install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space, saves more space than a side pull door and traditional double track bypass kit, can help you finish the project more quickly and easily. Why Choice Bypass Barn Door Hardware Kit1. Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening – closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel’s fluency. One full piece 6ft rail and Pre-drill 16 apart hole on rail to line up standard studs. Heavy duty construction ensures safetyMaterial thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold total 265 lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise. The hanger wheel surface is covered with nylon, slide very quietly. Single Track Bypass Sliding Barn Door Hardware Package include 1 x 6FT Rail, 5 x spacers, 4 x Rollers, 2 x Door Stops, 4 x anti-jump pad, 2 x Floor Guides, 1 x Installation Manual (step by step with fractional measurements in inch, very easy to install)–Only bypass barn door hardware for sale, barn door is not include. Fit for 1-3/8″ to 1-3/4″ door panel thickness. The item “ZEKOO 4 FT- 12 FT Bypass Sliding Barn Door Hardware Kit, 6 Feet, Black” is in sale since Monday, August 2, 2021. This item is in the category “eBay Motors\Parts & Accessories\RV, Trailer & Camper Parts & Accessories\Other RV, Trailer & Camper Parts & Accessories”. The seller is “ronedelheit” and is located in New York, New York. This item can be shipped to United States.
- Manufacturer: ZEKOO
- Part Number: GCM5164-1
- Item Weight: 19.96 pounds
- Package Dimensions: 72 x 5.9 x 3.2 inches
- Size: 6 Feet
- Color: Black
- Material: Steel
- Shape: I shape
- Installation Method: Screw-In
- Measurement System: English/Standard
- Batteries Included?: No
- Batteries Required?: No
- Brand: ZEKOO
- MPN: GCM5164-1
ZEKOO 4 FT- 12 FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden Doors Use, Flat Track Roller, One-Piece Rail Low Ceiling (6FT Single Track Bypass). Use for double door 2. The opening’s two sides don’t have enough space for sliding 3. Save ceiling spacer, only need 6” from the top of your door to the ceiling 4. Door weight capacity: 200lb 5. Door thickness for: 1-3/8″ 1-3/4″(35mm45mm) 6. We are professional factory, accept custom-made 6 FT(72 inches) kit’s included Total track: 1pc6 FT Roller: 4pcs Door stopper: 2pcs Track & wall spacer(with screws): 5pcs Floor guide: 2 Sets Anti-pad: 4pcs Prompt 1. Only the hardware is for sale, door is not included 2. Track’s length should be twice of your door panel’s width (you can use the track which is a little bit longer than your opening width) 3. The gap between inner door&wall is about 5/8” , the gap between two door panels is about 1 3/16” (based on door thickness: 1 9/16”) 4. Height from the top of the door to the ceiling is about 6”. Return: 90 days return time (If you did not like it or no longer need, under situation of the product does not affect the second sale that you could return to us) 3. We will timely solve your question within 24 hours 4. If you have any other ideas, please advise, we want to do better for you. Single Track Bypass System Upgraded One-Piece single track bypass sliding barn door hardware is low ceiling design, only need 6 inch ceiling space from top of the door to ceiling; Wall-mounted is very easy to install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space, saves more space than a side pull door and traditional double track bypass kit, can help you finish the project more quickly and easily. Why Choice Bypass Barn Door Hardware Kit1. Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated; Passed the test of opening – closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel’s fluency. One full piece 6ft rail and Pre-drill 16 apart hole on rail to line up standard studs. Heavy duty construction ensures safetyMaterial thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold total 265 lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise. The hanger wheel surface is covered with nylon, slide very quietly. Single Track Bypass Sliding Barn Door Hardware Package include 1 x 6FT Rail, 5 x spacers, 4 x Rollers, 2 x Door Stops, 4 x anti-jump pad, 2 x Floor Guides, 1 x Installation Manual (step by step with fractional measurements in inch, very easy to install)–Only bypass barn door hardware for sale, barn door is not include. Fit for 1-3/8″ to 1-3/4″ door panel thickness. S warehouse, any problem in using it, our professional staff in the barn door hardware field will answer questions for you in 24 hours. The item “ZEKOO 4 FT- 12 FT Bypass Sliding Barn Door Hardware Kit Single Track Double W” is in sale since Friday, December 10, 2021. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shirelp123″ and is located in Phoenix, AZ. This item can be shipped to United States.
- Size: 6 Feet
- Color: Black
- MPN: Does not apply
- Model: Does not apply
- Brand: ZEKOO
OPEN BOX – Like New&#######xA0;Items! Enjoy big discounts for our OPEN BOX – Like New items! All our Opened Box items are&#######xA0;in great condition each of them is tested and verified by professional logistic&#######xA0;teams, in most cases you’ll hardly notice the difference between our opened box items to equivalent new items, sometimes the product box do not meets brand new items standard, but besides that you will own a great product and in a competitive price. ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden. ZEKOO has devoted to the development of barn door hardware over 10 years, improve and upgrade products to give each family the most appropriate choice. ZEKOO 6.6ft single track bypass sliding barn door hardware kit use for double doors (door is not include). Q: How to choose barn door track size of single track bypass system? A: Barn door track length = Your opening width +1FT. For example, if your opening is 5.6FT (67.2”) wide, you will need 5.6FT+1FT = 6.6FT79.2” long track, your each door needs to be 39.6” wide, your opening will show 34.6” wide when the door open. Q: Can the single track bypass barn door hardware system let the opening show fully? A: Yes, you can select a longer track, if each door is 39.6” wide, you can choose 10FT track kit. Q: How confirm door width for the single track bypass system? A: Because this is single track bypass, one track hang 2 doors, the wheel diameter is 2-5/8” , so there are at least have 6” overlap between 2 doors when your install the hanger close to the edge of door, usually it will have 8”-10” overlap, so your each door width = Half width of opening + 5” to 6′. Q: Can each door slide independently on the track? A: No, the 2 doors slide on same track, so the 2 rollers will be hit together when one door slide to the end, maybe drive another door slide, if you have enough ceiling space above door for 9”, you can choice double track bypass system, please search ASIN number B06XPYZV8M from our shop. Q: Can the single track bypass use for four door also? A: Yes, you can add 1 set straight hanger B01KH3OH62 and 1 set offset hanger B08L4FN1ZP for the other 2 doors, please search the product number from our shop, just need to know that there have 8”-10” overlap between 2 doors, so each door need 5”-6” wider. About all accessories of 6.6 FT single track bypass hardware. 1 piece whole 6.6ft rail. Pre-drilled 16 apart holes. On track, make by solid 1/4 (6.3mm) thick steel, with 8.8 grade high strengh bearing capacity lag blots, fit for concrete wall and wooden wall. Provide 1-3/8” length spacer, it can control the gap between the door and the wall, if you have the door trim on wall, you can change other length spacer, please tell us. Prevent the door falling off from the track, it installed at the end of track 2 side, ensure the stability and safety, with the rubber plug, good damping effect and reduce the noise, have 2 screws to fasten stopper on track, you can put stopper on track where you want to stop your door, easy to remove if you want adjust. Can prevent the door swinging back and forth or against the baseboard, let your door slide on same locus, fit for all thickness with grooved or ungrooved doors. Can prevent door to be lifted off rail when the barn door slide, ensure the stability and safety. The barn door hanger roller with Professional bearings, make your bypass barn door hardware service life last longer. Material quality is high purity bearing steel Gcr15, professional bearing materials, ring fixed structure bearing, wraps around the steel ball and prevent steel ball from leaving the locus, make sliding more stable. There is a dust cover the bearing to prevent dust from entering and lubricating oil leakage, let the roller can slide smoothly and more durable. 1 hanger with 2 life time lubricated bearing, ensure sliding balance and stability, test beyond 160,000, you can use it for a long time. The roller surface is covered with nylon, wear-resisting and slide very quietly. We design the Dowel pin Front part slightly larger, keep the dowel stuck in hole not fall off. All of prat is make by Q235 carbon steel, thick is 1/4” (6.3mm). 8.8 grade roller bolt can hold the doors comfortably. The offset hanger with anti-jump design, give you safe sliding door experience. Single track bypass hardware kit package include. 1 x 6.6FT Rail. 2 x Straight steel Hanger with bolt. 2 x Offset steel Hanger with bolt. 2 x Door Stopper with Hex Wrench. 5 x 1-3/8” Spacer with lag bolt. 2 x Floor Guide with screw. 2 x Anti-Jumper with screw. 2 x Offset Anti-Jumper with screw. 1 x Barn Door Hardware Installation Manual. Why choice Single track bypass barn door hardware. Single track bypass barn door hardware system slides horizontally, it can save space compared with ordinary push door. Wall-mounted is low ceiling 6” install, no tedious installation steps, no request wall to be twice the width of the opening, suitable for small home space. Decorate your locker room, closet, kitchen, wardrobe, bathroom, bedroom, storeroom, change your home dull image. Barn door Installation dimension. Q: How much gap of the double track bypass system? A: We suggest door thickness less than or equal to 1-9/16”, If your door thickness is 1-9/16”, the gap between inner door&wall is about 5/8” , the gap between two door panels is about 1-3/16” , the outer door extend from the wall is 5”. Q: How to narrow the gap for the thinner door? A: If the thinner the door, the larger the gap, you can add a headboard on front of door, then install the hanger on headboard, that can narrow the gap of door with wall and door with door. Single track barn door bypass instructions step by step with fractional measurements in inch, have detailed word instructions with pictures. The track drilling hole on wall is = your door height + 1-11/16′. The hanger first hole install on door is 1-9/16 from top of door, second hole is 3-9/16 from first hole. Q: How much ceiling space requirement of the single track bypass system. A: At least 6 from top of door to ceiling to install. Q: Can i cut the track? A: Yes, you can cut it into any length of you want. Q: Can i use it for outdoors? A: We suggest if use for outdoors, you can make some cover above the track, and you need paint and add oil regularly to extended service life. Q: What circumstances do I need to add a headboard? If you have a doorway trim; 2. If the studs don’t line up with the pre-drilled holes in the rail. Q: How thick door use for it? What is the weight capacity? We suggest 1-3/8″ 1-9/16″ thick door will be better, If your door thick is 1-1-3/4, the inner door bolts need reverse installation, because the offset hanger size is fixed; 2. 2 side handle for the single track bypass. Better for the bypass kit. If you want to extend track. The four door hanger. We do NOT accept P. BOXES – PLEASE PROVIDE A PHYSICAL ADDRESS. &#######xA0;We advise you to use a reputable carrier service when returning your goods. Please check the Voltage information and make sure it matches the one in your country. In case it’s not stated in the description, do ask us. We guarantee that your issue will be solved quickly. We usually respond within 24 hours on weekdays. The item “ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden” is in sale since Sunday, August 8, 2021. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “experioma” and is located in US. This item can be shipped to United States.
- UPC: 689829122638
- EAN: 0689829122638
- Brand: ZEKOO
- MPN: Not Applicable
- Publisher: ZEKOO
- ProductGroup: Home Improvement
- Manufacturer: ZEKOO
- Label: ZEKOO
- Color: Black
- ISBN: Not Applicable
ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden. Main Material & SurfaceBlack frostedMultiple electrostatic powder spraying process, high quality carbon steel (High Standard Q235), corrosion protection, antirustenvironmental protection, non-pollution. DesignTrack’s hole: standard 16 inches. Track and roller arm thickness: 1/4 inches, very sturdy. Track and door bolts is 8.8 grade high strengh bearing capacity. Stopper: rubber covered, good buffer effect, reduce the noise. The wheel surface is covered with nylon, slide very quietly. Core PartsRoller Bearing is high purity bearing steel Gcr15, passed the test of opening – closing for 100000 times, wear-resisting, ensure the stability of the move and the wheel’s fluency. Wheel shaft is made of reinforced steel and electrophoretic process, These are different from other products. ProductWe are professional factory, product has been tested and verified several times, accept custom-made barn door hardware. Our instruction are illustrated in inches, easy to install. Use for double door 2. The opening’s two sides don’t have enough space for sliding 3. Save ceiling spacer, only need 6” from the top of your door to the ceiling 4. Door weight capacity: 200lb 5. Door thickness for: 1-3/8″ 1-3/4″(35mm45mm) 6. We are professional factory, accept custom-made 6.6 FT(79 inches) kit’s included Total track: 1pc6.6 FT Roller: 4pcs Door stopper: 2pcs Track & wall spacer(with screws): 5pcs Floor guide: 2 Sets Anti-pad: 4pcs Prompt 1. Only the hardware is for sale, door is not included 2. Track’s length should be twice of your door panel’s width (you can use the track which is a little bit longer than your opening width) 3. The gap between inner door&wall is about 5/8” , the gap between two door panels is about 1-3/16” (based on door thickness: 1-9/16”) 4. Height from the top of the door to the ceiling is about 6”. Return: 90 days return time (If you did not like it or no longer need, under situation of the product does not affect the second sale that you could return to us) 2. We will timely solve your question within 24 hours 3. If you have any other ideas, please advise, we want to do better for you. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. The item “ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden” is in sale since Tuesday, February 23, 2021. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “trinura10″ and is located in Multiple Locations. This item can be shipped to United States.
- Material: Steel
- Color: Black
- MPN: Does not apply
- Brand: ZEKOO
- Suitable For: Barn Door
- Size: 6.6 FT Single Track Bypass
ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden Doors Use, One-Piece Rail, Flat Track Roller, Low Ceiling. Main Material & SurfaceBlack frostedMultiple electrostatic powder spraying process, high quality carbon steel (High Standard Q235), corrosion protection, antirustenvironmental protection, non-pollution. DesignTrack’s hole: standard 16 inches. Track and roller arm thickness: 1/4 inches, very sturdy. Track and door bolts is 8.8 grade high strengh bearing capacity. Stopper: rubber covered, good buffer effect, reduce the noise. The wheel surface is covered with nylon, slide very quietly. Core PartsRoller Bearing is high purity bearing steel Gcr15, passed the test of opening – closing for 100000 times, wear-resisting, ensure the stability of the move and the wheel’s fluency. Wheel shaft is made of reinforced steel and electrophoretic process, These are different from other products. ProductWe are professional factory, product has been tested and verified several times, accept custom-made barn door hardware. Our instruction are illustrated in inches, easy to install. Any problem in using it, our professional staff in the barn door hardware field will answer questions for you. Use for double door 2. The opening’s two sides don’t have enough space for sliding 3. Save ceiling spacer, only need 6” from the top of your door to the ceiling 4. Door weight capacity: 200lb 5. Door thickness for: 1-3/8″ 1-3/4″(35mm45mm) 6. We are professional factory, accept custom-made 6.6 FT(79 inches) kit’s included Total track: 1pc6.6 FT Roller: 4pcs Door stopper: 2pcs Track & wall spacer(with screws): 5pcs Floor guide: 2 Sets Anti-pad: 4pcs Prompt 1. Only the hardware is for sale, door is not included 2. Track’s length should be twice of your door panel’s width (you can use the track which is a little bit longer than your opening width) 3. The gap between inner door&wall is about 5/8” , the gap between two door panels is about 1-3/16” (based on door thickness: 1-9/16”) 4. Height from the top of the door to the ceiling is about 6”. Return: 90 days return time (If you did not like it or no longer need, under situation of the product does not affect the second sale that you could return to us) 3. We will timely solve your question within 24 hours 4. If you have any other ideas, please advise, we want to do better for you. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. The item “ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden D” is in sale since Wednesday, February 10, 2021. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “tibbetts-55″ and is located in Walnut Creek, California. This item can be shipped to United States.
- Color: Black
- MPN: Does not apply
- Brand: ZEKOO
- Suitable For: Barn Door
- Size: 6.6 FT Single Track Bypass
ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden Doors Use, One-Piece Rail, Flat Track Roller, Low Ceiling. Main Material & SurfaceBlack frostedMultiple electrostatic powder spraying process, high quality carbon steel (High Standard Q235), corrosion protection, antirustenvironmental protection, non-pollution. DesignTrack’s hole: standard 16 inches. Track and roller arm thickness: 1/4 inches, very sturdy. Track and door bolts is 8.8 grade high strengh bearing capacity. Stopper: rubber covered, good buffer effect, reduce the noise. The wheel surface is covered with nylon, slide very quietly. Core PartsRoller Bearing is high purity bearing steel Gcr15, passed the test of opening – closing for 100000 times, wear-resisting, ensure the stability of the move and the wheel’s fluency. Wheel shaft is made of reinforced steel and electrophoretic process, These are different from other products. ProductWe are professional factory, product has been tested and verified several times, accept custom-made barn door hardware. Our instruction are illustrated in inches, easy to install. Any problem in using it, our professional staff in the barn door hardware field will answer questions for you. Use for double door 2. The opening’s two sides don’t have enough space for sliding 3. Save ceiling spacer, only need 6” from the top of your door to the ceiling 4. Door weight capacity: 200lb 5. Door thickness for: 1-3/8″ 1-3/4″(35mm45mm) 6. We are professional factory, accept custom-made 6.6 FT(79 inches) kit’s included Total track: 1pc6.6 FT Roller: 4pcs Door stopper: 2pcs Track & wall spacer(with screws): 5pcs Floor guide: 2 Sets Anti-pad: 4pcs Prompt 1. Only the hardware is for sale, door is not included 2. Track’s length should be twice of your door panel’s width (you can use the track which is a little bit longer than your opening width) 3. The gap between inner door&wall is about 5/8” , the gap between two door panels is about 1-3/16” (based on door thickness: 1-9/16”) 4. Height from the top of the door to the ceiling is about 6”. Return: 90 days return time (If you did not like it or no longer need, under situation of the product does not affect the second sale that you could return to us) 3. We will timely solve your question within 24 hours 4. If you have any other ideas, please advise, we want to do better for you. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. The item “ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden D” is in sale since Tuesday, February 2, 2021. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “aiagu-86″ and is located in Miami, Florida. This item can be shipped to United States.
- Color: Black
- MPN: Does not apply
- Brand: ZEKOO
- Suitable For: Barn Door
- Size: 6.6 FT Single Track Bypass
Main Material & SurfaceBlack frostedMultiple electrostatic powder spraying process, high quality carbon steel (High Standard Q235), corrosion protection, antirustenvironmental protection, non-pollution. DesignTrack’s hole: standard 16 inches. Track and roller arm thickness: 1/4 inches, very sturdy. Track and door bolts is 8.8 grade high strengh bearing capacity. Stopper: rubber covered, good buffer effect, reduce the noise. The wheel surface is covered with nylon, slide very quietly. Core PartsRoller Bearing is high purity bearing steel Gcr15, passed the test of opening – closing for 100000 times, wear-resisting, ensure the stability of the move and the wheel’s fluency. Wheel shaft is made of reinforced steel and electrophoretic process, These are different from other products. ProductWe are professional factory, product has been tested and verified several times, accept custom-made barn door hardware. Our instruction are illustrated in inches, easy to install. Any problem in using it, our professional staff in the barn door hardware field will answer questions for you. Use for double door 2. The opening’s two sides don’t have enough space for sliding 3. Save ceiling spacer, only need 6” from the top of your door to the ceiling 4. Door weight capacity: 200lb 5. Door thickness for: 1-3/8″ 1-3/4″(35mm45mm) 6. We are professional factory, accept custom-made 6.6 FT(79 inches) kit’s included Total track: 1pc6.6 FT Roller: 4pcs Door stopper: 2pcs Track & wall spacer(with screws): 5pcs Floor guide: 2 Sets Anti-pad: 4pcs Prompt 1. Only the hardware is for sale, door is not included 2. Track’s length should be twice of your door panel’s width (you can use the track which is a little bit longer than your opening width) 3. The gap between inner door&wall is about 5/8” , the gap between two door panels is about 1-3/16” (based on door thickness: 1-9/16”) 4. Height from the top of the door to the ceiling is about 6”. Return: 90 days return time (If you did not like it or no longer need, under situation of the product does not affect the second sale that you could return to us) 3. We will timely solve your question within 24 hours 4. If you have any other ideas, please advise, we want to do better for you. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. The item “ZEKOO 6.6FT Bypass Sliding Barn Door Hardware Kit, Single Track, free shipping” is in sale since Monday, February 1, 2021. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “chrha-27″ and is located in multiple locations. This item can be shipped to United States.
- Color: Black
- MPN: Does not apply
- Brand: ZEKOO
- Suitable For: Barn Door
- Size: 6.6 FT Single Track Bypass