Surface: Black frosted, corrosion protection. Main Material: High quality carbon Steel. If you have any other ideas, please advise. Door panel thickness: 35/40mm. Door Max Weight: 150lbs – 250lbs. Ocasion: Kitchen, dinning room, bedroom, coffee bar, farm, etc. 6FT-16FT Track fit for door opening: 36inch – 96inch. Customers will be offered both wooden wall screws and concrete wall screws. Track’s length should be twice of your door panel’s width, please select the length based on the door panel or opening. The gap between THK 40 mm door panel and the wall is about 16 mm, height from the top of the door panel to the top of the roller is about 130 mm for reference. Only the hardware is for sale. Door is not included. International buyers please note. These charges are buyers responsibility. Customers should contact our Customer Department within 14 Days after receiving the item. During the period we would like to accept return in the following cases: such as goods are in good condition and don’t affect secondary sales, quality defects or other problem. Customers’ issues such as: no longer needed, don’t like, bought by mistake, etc. Our staff will do unpacking and inspection for your return goods ASAP. Thanks for your patience and cooperation. The item “4FT-18FT Modern Sliding Barn Wood Door Hardware T-Shape Black Rollers Track Kit” is in sale since Wednesday, November 7, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “saledecoration” and is located in CA. This item can be shipped worldwide.
- Country/Region of Manufacture: China
- MPN: Does Not Apply
- Brand: winsoon
- Special Offer: Free Shipping
5-16FT Sliding Barn Wood Door Hardware Track Kit Modern Black T-Shape Roller Set (1.5m-4.88m). Surface: Black Frosted, Corrosion Protection. Main Material: High Quality Carbon Steel. Track and Roller Arm Thickness: 6 mm. Used For: 5ft-16ft Single/Double doors system (Door panel is not included). Door Stopper: Keep rollers on track; Advanced spring design, no noise. Junction plate(Connector): Mount track to wall; docking non-trace, artistic. Steel Hangers (Rollers): 2 x rollers use for one door. Floor Guide: Keep door in its position. Anti-Jump Pad: Prevent door from falling down. The sliding rail: long hole design, easy to install. Roller bearing: High purity bearing steel Gcr15, wear-resisting, ensure the stability of the move and the wheel’s fluency. Passed the test of opening – closing: 100000 times. Customers will be offered screws fit for wooden wall and concrete wall. Track length should be twice of your door panels with, please select the length based on the door panel or opening. Door weight capacity: 150 lb – 260 lb. Door panel thickness: 35/45 mm. 5 FT-16 FT Track fit for door opening: 30 inch – 96 inch. The gap between THK 40 mm door panel and the wall is about 16 mm, height from the top of the door panel to the top of the roller is about 150 mm for reference. Only the hardware is for sale. Door is not included. Thank you very much. The item “5-16FT Sliding Barn Wood Door Hardware Track Kit Modern Black T-Shape Roller Set” is in sale since Thursday, April 6, 2017. This item is in the category “Home, Furniture & DIY\DIY Materials\Doors & Door Hardware\Other Door Hardware”. The seller is “hahaemall” and is located in shenyang. This item can be shipped worldwide.
- Door Type: For Single/Double Door Kit
- Fit Door Thickness: 35-45mm / 1.38″-1.77″
- Load-bearing: 260lbs (120kg)
- Country/Region of Manufacture: China
- MPN: Does Not Apply
- Style: American Modern T-Shape
- Unit Type: kg
- Brand: HaHaemall
- Unit Quantity: 1
- Featured: Heavy Duty, Durable
- Color: Matte Black
- Bundle Listing: No
- Type: Sliding Door Track
5FT-16FT Modern “T” Shape Hangers Track Kit Sliding Barn Wood Door Hardware Black (1.5m-4.88m). Surface: Black Frosted, Corrosion Protection. Main Material: High Quality Carbon Steel. Track and Roller Arm Thickness: 6 mm. Used For: 5ft-16ft Single/Double doors system (Door panel is not included). Door Stopper: Keep rollers on track; Advanced spring design, no noise. Junction plate(Connector): Mount track to wall; docking non-trace, artistic. Steel Hangers (Rollers): 2 x rollers use for one door. Floor Guide: Keep door in its position. Anti-Jump Pad: Prevent door from falling down. The sliding rail: long hole design, easy to install. Roller bearing: High purity bearing steel Gcr15, wear-resisting, ensure the stability of the move and the wheel’s fluency. Passed the test of opening – closing: 100000 times. Customers will be offered screws fit for wooden wall and concrete wall. Track length should be twice of your door panels with, please select the length based on the door panel or opening. Door weight capacity: 150 lb – 260 lb. Door panel thickness: 35/45 mm. 5 FT-16 FT Track fit for door opening: 30 inch – 96 inch. The gap between THK 40 mm door panel and the wall is about 16 mm, height from the top of the door panel to the top of the roller is about 150 mm for reference. Only the hardware is for sale. Door is not included. Thank you very much. The item “150-488cm Modern Sliding Barn Wood Door Hardware T-Shape Black Rollers Track Kit” is in sale since Sunday, July 16, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “hahaemall” and is located in ShenYang. This item can be shipped worldwide.
- Brand: HaHaemall
- MPN: Does Not Apply
- Type: Sliding Door Track
- Featured Refinements: Sliding Barn Door Hardware
- Bundle Listing: No
- Country/Region of Manufacture: China
- Color: Matte Black
- Fit Door Thickness: 35-45mm / 1.38″-1.77″
- Style: Modern “T” Shape Hangers
- Material: Carbon Steel
- Load-bearing: 260lbs (120kg)
- Featured: Heavy Duty, Durable
Modern Stainless Steel Sliding Barn Wood Door Hardware Track Kit T-Shape Rollers (1.5m-4.88m). Main Material: High quality 304 Stainless steel, high corrosion resistance. Color: Wire drawing technology, manufactured by integral moulding. Track and Roller Arm Thickness: 6 mm, heavy duty metal track. Used For: Single/ Double wood door system (door panel is not included). The sliding rail: long hole design, easy to install, junction plate, artistic. Fit For: Door panel thickness 1 3/8″-1 3/4″. Door weight capacity: 150 lb – 200 lb. Passed 100,000 times opening and closing test. Very solid and easily understood installation Manual is in the package. Track’s length should be twice of your door panel’s width, please select the length based on the door panel or opening. You need at least 6 inch space from the top of your door to your ceiling. Door panel thickness: 35/45 mm. 5 FT-16 FT Track fit for door opening: 30 inch – 96 inch. The gap between the 1 3/8 thick door panel and the wall is about 16 mm, height from the top of the door panel to the top of the roller is about 150 mm for reference. Only the hardware is for sale. Door is not included. Thank you very much. The item “Modern Stainless Steel Sliding Barn Wood Door Hardware Track Kit T-Shape Rollers” is in sale since Monday, September 26, 2016. This item is in the category “Home, Furniture & DIY\DIY Materials\Doors & Door Accessories\Other Door Accessories”. The seller is “hahaemall” and is located in Shen Yang. This item can be shipped worldwide.
- Brand: HaHaemall
- MPN: Does Not Apply
- Material: 304 Stainless Steel
- Type: Sliding Door Track
- Country/Region of Manufacture: China
- Bundle Listing: No
- Unit Type: kg
- Unit Quantity: 1
- Load-bearing: 260lbs (120kg)
- Style: American Modern T-Shape
- Fit Door Thickness: 35-45mm / 1.38″-1.77″
- Door Type: For Single/Double Wood Door Kit