Sliding Door Hardware
Gifsin 4-9.6FT Antique Style Wood Sliding Barn Door Hardware Kit Black Top Mount

Gifsin 4-9.6FT Antique Style Wood Sliding Barn Door Hardware Kit Black Top Mount

Gifsin 4-9.6FT Antique Style Wood Sliding Barn Door Hardware Kit Black Top Mount

Gifsin 4-9.6FT Antique Style Wood Sliding Barn Door Hardware Kit Black Top Mount

Gifsin 4-9.6FT Antique Style Wood Sliding Barn Door Hardware Kit Black Top Mounted Closet Hardware for Single Door. PLS NOTE: ONLY the hardware kit is for sale, door panel is not included. This hardware kit is for single door. Easy to Install: All accessories and step-by-step instructions with pictures included. Long Sliding Rail : High quality steel for high weight capacity. Sliding Rollers: Quality bearing steel keep the wheels run smoothly in track. Sliding barn door hardware is popular to be installed in. Bedroom, study room, living room or kitchen. Which can match with different styles and different colors of doors for the simple and artistic style. Push-pull opening and closing way saves lots of space which is quite suitable for modern decoration style. Due to the simple design of the slide, no installation experience is needed, just follow the simple installation instructions. Choose Door Width and Sliding Roller. 1 Confirm Door Width. Single Door : Door Width=Door Opening Width+100mm. Double Door : Door Width=(Door Opening Width+100mm)/2. Single door opening width 800mm, door width at least needs to be 900mm. Double door opening width 1500mm, door width at least needs to be 800mm. Notice: Please note 100mm is the least to add. 2 Confirm Length of Sliding Rail. Single Door: Sliding Rail Length > Door Width2. Double Door: Sliding Rail Length > Door Width4. Measure the Wall and Drill Holes. Different sliding rail sizes require different measurements and hole quantites, please measure first and use a pencil mark on the wall. Then you can drill holes as suggested. Please note percussion bit size for wooden door is 5mm and concrete wall is 10mm. Install Anchoring Screws (Concrete Wall). Wooden Wall: Use the hammer to punch the screw in, then use the wrench to twist the screw until it is fixed. Install the Sliding Roller. Find the sliding roller you have first, measure size and draw lines as below pictures. Mark the place where you need to drill the holes. Then drill holes accordingly and fix the screws to finish the installation of sliding roller. (1) Put the anti-jump disk to the edge of the door and fix it first (2) Then spin it to the center of the door and screw the disk. Install Floor Guide and Adjust Door Stops. Position: 25mm from the wall to the center line of the floor guide holes. Distance between the wall and inside holes is 24mm. Measurements: Two holes, distance 24mm, use a 6mm bit, hole depth 30mm. To Canada may course CAD 15-30 for reference. To European country may course EUR 35-50 for reference. For detailed cost, pls kindly ask your local custom. If you are satisfied with our items and service. Pls kindly give us 5 Stars. Then we will try our best to solve any problem and provide you with the best customer services. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. The item “Gifsin 4-9.6FT Antique Style Wood Sliding Barn Door Hardware Kit Black Top Mount” is in sale since Thursday, January 7, 2021. This item is in the category “Home, Furniture & DIY\DIY Materials\Doors & Door Hardware\Other Door Hardware”. The seller is “story-depot” and is located in China. This item can be shipped worldwide.
  • Model: Does Not Apply
  • Color: Frosted Black
  • Manufacturer: Does Not Apply
  • UPC: 313026246216
  • EAN: Does Not Apply
  • Wood door thickness: 35mm-55mm
  • Main Material: Wooden
  • Door panel: not included
  • Open Style: Sliding
  • Wood door width: 450mm- 1400mm
  • Model Number: CZJJS-4-9.6
  • Sliding rail width: 1 4/7″(40mm)
  • Type: Cabinet Doors
  • MPN: Does Not Apply
  • Brand: Does Not Apply
  • Frame Material: Polymer
  • Origin: China
  • Door Type: Polymer
  • Surface Finishing: Painted
  • Door Weight Capacity: Maximum 200lbs doors are supported.
  • Position: Interior
  • Sliding rail thickness: 3/13″ (6mm)
  • Door Material: Solid Wood
  • Hardware Kit Weight: 4FT-10FT
  • Charge Unit: Set
  • Opening Method: Push and Pull
WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit

WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit

WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit

WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit

WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit

WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit

WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit

WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit, Heavy Duty, Slide Smoothly and Quietly, Easy Install, for Single Door. You will need 14cm clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Fit for door panel thickness: 3.5cm-4.5cm. This hardware kit can hold door weight 105kg. To help you choose the fit kit, we recommend the track length shoulde be twice of the doors width at least, and you can also cut the track into any length to meet your need. Safety Measures Hanger: Upgraded Nylon wheels, each with 2 life time lubricated bearing ensure slide smoothly and quietly. Test beyond 120,000 times. You can use it for a long time! Door Stopper: Prevent your door from rolling off the rail, Anti-collision, the rubber circle ensure a quiet close. Anti-jump Bar: Prevent door be lifted off rail. Install them on the top of your door, the anti-jump bar and the roller can hold the rail once the door hit the stopper. T Floor Guide The floor guide can prevent the door from swing, allow you to open and close your door freely. This hidden door guide need you to open a slot on the bottom of your door, suitble for cabinet has bottom trim. Easy to install This hardware requires at max 2 people. Super detailed installation manual included. All tracks can be connected with other tracks with a junction bar. THE CLEARANCE from the top of your door to the ceiling should be at least 14cm to install the barn door hardware. Please make sure that all of your rollers are the same style. Read more Packaging List 2 x 91.5cm Rail4 x Track Support2 x Steel Hanger2 x Door Stopper1 x Door Guide1 x Hex Wrench1 x Junction PlateAll other necessary hardware is included as you see in the pictures. ONLY the hardware is for sale, doors are NOT INCLUDED. [HARDWARE MATERIAL] – WINSOON barn door hardware is made using premium stainless steel. High quality stainless steel with wire drawing surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior. [EASY TO INSTALL] – This hardware requires at max 2 people. Professional customer service team help you solve all installation problems in time. [PACKAGE INCLUDED] – A Barn Door Hardware Kit 2 x 91.5cm Rails, 2 x Hangers, 4 x Rail Supports, 2 x Door Stoppers, 2 x End Caps, 1 x Floor Guide, 1 x Junction Plate, 1 x Hex Key. All other necessary hardware are included as you see in the pictures. [DOOR WEIGHT CAPACITY] – Max 105kg. Fit 3.5cm to 4.5cm door panel thickness. The rail length should be twice of your doors width. We recommend your door is 10cm wider than your opening. Then it would look more beautiful and can cover your opening well. Our sliding door hardware has passed 120,000 times opening and closing tests. Any problem in using it, our Professional Customer Service Team will answer questions for you. Package Dimensions: 102.6 x 18 x 6 cm; 5.4 Kilograms. Size: 183CM Single Door Kit. Item Weight: 5.4 kg. Date First Available: 1 Jun. Items dispatch from various location, including our international warehouses. We will respond quickly with instructions for how to return items from your order. The item “WINSOON 183cm Top Mount Stainless Steel Barn Sliding Door Hardware Track Kit” is in sale since Wednesday, January 13, 2021. This item is in the category “Home, Furniture & DIY\DIY Materials\Doors & Door Hardware\Other Door Hardware”. The seller is “bigamart_uk” and is located in GB. This item can be shipped worldwide.
  • MPN: GCM2704
  • Size Name: 183CM Single Door Kit
  • Brand: WINSOON
  • UPC: Does not apply
  • EAN: Does not apply
Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware

Only box rail barn door hardware for sale, door panel and handle are NOT included. Material:Steel;Surface:Galvanized;Ceiling mount hardware. This kit can hold MAX door weight 300lbs, can be used for both interior door and outside door. Suitable for door panel thickness 1 1/2″ to 2″. The rollers vertical lock nuts are adjustable. The gap between door and wall is supper small. Box track ceiling bracket2. 6.6FT kit including. 6.6FT box track1. Box track ceiling bracket3. The item “Raw Material Galvanized Box Track Ceiling Mount Sliding Barn Door Hardware” is in sale since Sunday, February 9, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Model: SS-M0083 Kit
  • Country/Region of Manufacture: China
  • Item Height: 0.25 in
  • Item Width: 0.25 in
  • Material: Stainless Steel
  • Type: Sliding Door Track
  • Color: Silver
  • Finish: Galvanized
  • Item Length: 0.5 in
  • Brand: DIYHD
  • Suitable For: Barn Door
  • Item Diameter: 0.25 in
SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel

SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit – Stainless Steel Heavy Duty Sturdy Barn Door Track – Simple and Easy to Install – Fit 36 Wide Door Panel (T Shape Hanger). RELIABLE HARDWARE: Made by heavy duty stainless steel, move smoothly and quietly. Get it with reasonable price and provide you a completely joyful experience. EASY TO INSTALL: Clear and professional step-by-step insturction help you intall it in short time, save the cost of finding a carpenter and enjoy DIY your own barn door. PACKAGE INCLUDED: 1x 6FT Rail, 5x Rail Spacers, 2x Rollers, 2x Door Stops, 2x End Caps, 1x Floor Guide, 1x Hex Key; all other necessary hardware is included in the pictures. For 16 inch stud. Only the hardware kit for sale, Door Not Included. Door Weight Capacity: 220 lb; Fit door panel Width: 36″; Fit door panel thickness: 1 3/8″ – 1 3/4. RIGHT CHOICE FOR YOUR HOME: Not only saving the place by simplely push-and-pull, also a classic style decoration with beautiful appearance, fit any kind of room in your home. Q: How to ensure the stability and safety of the door? Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close. A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard. Those little round discs- go on top of the door and won’t allow door to be lifted off rail unless they’re turned. Q: When do you need a headboard? If the studs don’t line up with the pre-drilled holes in the rail. If there is a doorway trim. Q: How much space do I need above the doorway? A: You will need a minimum of 5 from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: How thick of a door will this kit work with? A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8″ to 1 3/4″, but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below. 2”- door depth – trim depth. If your answer is 0 or greater, then you’re fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board. Suitable Track Length (ft). We offer high quality products. Our E-store includes media such as books, movies, music and games while offering toys, sporting goods, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. Once you press Submit , your order begins processing and cannot be changed or cancelled. All electronic items will come with USA spec plug-ins. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. The item “SMARTSTANDARD 6 Feet Top Mount Sliding Barn Door Hardware Kit Stainless Steel” is in sale since Thursday, October 15, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “rjbayshop” and is located in US. This item can be shipped to United States.
  • Color: Stainless
  • Manufacturer: SMARTSTANDARD
  • Model: Does Not Apply
  • Brand: SMARTSTANDARD
  • UPC: 313051232208
  • ISBN: Does not apply
  • EAN: 07445019559591
  • MPN: Does not apply
  • Part Number: SDH0060STAINLESS01
  • Batteries Required?: No
  • Pattern: 6FT Kit [Single Door]
  • Item Weight: 11.62 pounds
  • Batteries Included?: No
  • Package Dimensions: 73.75 x 6 x 2.88 inches
  • Size: 6 Feet
Barn Door Floor Guide Stay Roller Black Powder Coated Adjustable Wall Mount

Barn Door Floor Guide Stay Roller Black Powder Coated Adjustable Wall Mount

Barn Door Floor Guide Stay Roller Black Powder Coated Adjustable Wall Mount

Barn Door Floor Guide Stay Roller Black Powder Coated Adjustable Wall Mount

Barn Door Floor Guide Stay Roller Black Powder Coated Adjustable Wall Mount

Barn Door Floor Guide Stay Roller Black Powder Coated Adjustable Wall Mount

Barn Door Floor Guide Stay Roller – Black Powder Coated Adjustable Wall Mount Guide with 8 Different Setups – Perfect Fit for ALL Barn Doors – Bottom Bracket Sits Flat On Floor – No Guess Zero Stress. MOST ADVANCED DESIGN WITH 8 SETUP OPTIONS: Take out the guesswork! No need to waste valuable time looking at different design options and guessing which one will work best. With EIGHT different setup options, you can be sure that this stay roller will work with ANY barn door. Simply set up the configuration you think works and looks best by following the provided instructions and install. If you dont like it, you still have seven additional variations to play around with! COMPLETELY FLUSH BOTTOM: No need to drill holes in your floor for bulky hardware. This product has been specially designed to allow for the barn door bottom bracket sit completely flat on the floor. This allows for a quick and painless installation. Additionally, the securing wall screws will lay flush with the bracket to prevent from sticking out and scraping against your beautiful barn door! FULLY ADJUSTABLE: All of the EIGHT setup options are easily adjusted to ensure the perfect fit. Regardless of the size or type of barn door you have, we guarantee that this floor guide will provide a secure fit. EASY DIY INSTALLATION: With easy to follow step-by-step instructions, you can rest assured that no matter your DIY background, you will be able to install this stay roller with ease. From setup to adjustment to installation our picture packed instruction manual will guide you through the process alleviating any questions you may have. CAREFULLY CRAFTED: Manufactured with quality as the number one priority! Constructed from the most durable steel to ensure dependability BOTH indoors and out. Unlike many other steel rollers on the market, our large roller is made from durable plastic and was specifically designed to keep from scratching your door! The SCRATCH RESISTANT black powder coated finish prevents rust and protects the steel while providing visual appeal for many years to come. THE BEST BARN DOOR STAY GUIDE ON THE MARKET. With 8 different setup options, you decide what works and looks best. Forget about the clunky one size fits all options and order with confidence knowing that you have 8 options that will each fit all. COMPLETELY FLUSH AND THE SLEEKEST FLOOR GUIDE ON THE MARKET. From the counter sunk wall screws to the flush base this barn door floor guide remains sleek and streamlined regardless of what others claim. Unlike other stay rollers, the hardware that doesnt need to protrude is neatly tucked away eliminating the risk of scratching or damaging your beautiful barn doors. WEATHER AND WEAR RESISTANT. The chip-resistant finish on this barn door floor roller has been specially engineered to withstand water exposure and corrosion. Unlike other products on the market that easily chip and rust, this stay roller will stand up to the elements and remain rust-free for years to come. BEAUTIFUL STEEL BLACK POWDER COATING WITH ALL BLACK DESIGN. All Proven Standard stay rollers come with a black powder coated L-bracket and all black hardware providing you with not only a durable product but also an astatically pleasing one. By following the included step-by-step instructions, installation is a breeze. Whether you are the dedicated do-it-yourselfer or just the average Joe you can be sure that installing this piece of hardware is well within your grasp. FULLY ADJUSTABLE FOR DOORS UP TO 3 THICK. Once installed, simply adjust the roller(s) along the track to fit your specific door thickness. Dont worry, the instructions explain exactly how to do this. The item “Barn Door Floor Guide Stay Roller Black Powder Coated Adjustable Wall Mount” is in sale since Thursday, October 19, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “us2014.hajal” and is located in Dearborn, Michigan. This item can be shipped to United States.
  • UPC: 781055099187
  • EAN: 0781055099187
  • Brand: Proven Standard
  • MPN: V16-0314666A8
  • Color: Black
  • Weight: 1.22 pounds
  • Dimensions: L 5.63 x W 4.06 x H 2.32 inches
  • ProductGroup: Home Improvement
  • ISBN: Not Applicable
DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit

DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit

DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit

DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit

DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit

DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit

DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit

DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit

Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit. Only Hardware For Sale, Barn Door Slab Is Not Included. Pictures provided for visual reference only: actual product may vary. Please check full set hardware information below. Hardware Material:Steel;Plastic. Full set hardware including. Track1 + Track&wall connector1 set (pre-installed on track). The item “DIYHD Top Mount Black Spoke Wheel Sliding Barn Wood Door Hardware Kit” is in sale since Friday, November 27, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Model: BL-Top
  • Item Height: 0.25 in
  • Item Width: 0.25 in
  • Material: Metal
  • Type: Sliding Door Kit
  • Color: Black
  • Finish: Black
  • Item Length: 0.25 in
  • Brand: DIYHD
  • Suitable For: Barn Door
  • Item Diameter: 0.25 in
DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware

DIYHD Top Mount Twin Gear Roller Sliding Barn Door Hardware, Rotatable Gear Roller, Black. Hardware Only, Not Including Door Panel. Easy for installation, the black powder-coated steel hardware has a versatile look that is perfect for any interior space. 5FT track pre-drilled 16″ apart holes, fit 16″ apart studs wall;5FT track can work with door width up to 30. The height from top of the door to the top of the roller is 4 13/16, please leave enough space for installation. Hardware suitable for door thickness 1 3/8″1 3/4″. 2 rollers can hold 1 door MAX weight 198lbs. The gap between door and wall is about 1 1/8″ based on door thickness 1 3/8″; Gap 3/4″ based on door thickness 1 3/4″. 5FT hardware including:Rotatable gear roller2;Stop2;5FT track1;Track&wall connector4;Anti-pad2;Floor guide1. 6FT track pre-drilled 16″ apart holes, fit 16″ apart studs wall;6FT track can work with door width up to 36. 6FT hardware including:Rotatable gear roller2;Stop2;6FT track1;Track&wall connector5;Anti-pad2;Floor guide1. 6.6FT track pre-drilled 16″ apart holes, fit 16″ apart studs wall;6.6FT track can work with door width up to 39. 6.6FT hardware including:Rotatable gear roller2;Stop2;6.6FT track1;Track&wall connector5;Anti-pad2;Floor guide1. 8FT track pre-drilled 16″ apart holes, fit 16″ apart studs wall;8FT track can work with door width up to 48. 8FT hardware including:Rotatable gear roller2;Stop2;8FT track1;Track&wall connector6;Anti-pad2;Floor guide1. The item “DIYHD Top Mount Black Rotatable Gear Roller Sliding Barn Door Hardware” is in sale since Thursday, July 4, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Model: Gear-Top
  • Country/Region of Manufacture: China
  • Item Height: 0.25 in
  • Item Width: 0.25 in
  • Material: STEEL
  • Type: Sliding Door Track
  • Color: Black
  • Finish: Black
  • Item Length: 0.5 in
  • Brand: DIYHD
  • Suitable For: Barn Door
  • Item Diameter: 0.25 in
Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

Ceiling mount sliding barn door hardware rustic black ceiling bracket

DIYHD Ceiling Mount Bracket Sliding Barn Door Track Kit, Rustic Black Straight Roller. Hardware Only, Not Including Door Panel. Ceiling mount kit mainly suitable for openning don’t have enough beam space to mount track. Full set hardware including. Track1pcs + Ceiling bracket1 set. Door panel’s height H=Ceiling height-171mm(6 7/10). The gap between door and wall is about 14.5mm(3/5″) based on door thickness 40mm(1 4/7″). Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/5″. The item “Ceiling mount sliding barn door hardware rustic black ceiling bracket” is in sale since Wednesday, September 5, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “beileli_0″ and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Model: MM20D-Ceiling Kit
  • Country/Region of Manufacture: China
  • Item Height: 0.25 in
  • Item Width: 0.25 in
  • Material: STEEL
  • Type: Sliding Door Track
  • Color: Black
  • Finish: Black
  • Item Length: 0.25 in
  • Brand: DIYHD
  • Suitable For: Barn Door
  • Item Diameter: 0.25 in
Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set

Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set

Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set

Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set

Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set

Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set

Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set

Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set

WINSOON Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware (2 set). Double Wheel Door Guide. Type: Adjustable Use for: Wood doors Material: Solid cast iron with powder coated Size: 4.8” L X 2” W X 2.5” H Arm Thickness: 5 mm Package: 2pc Wall mount floor guide with four screws. Adjustable door guide with two rollers for bottom of the barn door prevent your door sway away from the wall. Works with all brands of sliding barn door hardware. Steel adjustable roller, smooth and quiet roll works with doors up to 2 1/5 thick. Easily mounts to wall with 2 mounting screws (included). Looks great both indoor and outdoors. The distance between the floor and the door should be at least 1/4. No need to cut a groove in the floor. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. Customers’ issues such as: no longer needed, don’t like, bought by mistake, etc. Our staff will do unpacking and inspection for your return goods ASAP. Thanks for your patience and cooperation. We try our very best to make sure every customer is completely satisfied. If there’s a problem, please message us freely! We’re happy to help. The item “Sliding Barn Door Floor Guide Wall Mount Adjustable Double Roller Hardware 2 Set” is in sale since Friday, November 13, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “wins5149″ and is located in Pomona, California. This item can be shipped to United States.
  • Model: GCM3239
  • Item Height: 2.5 in
  • Item Width: 2 in
  • Material: Metal
  • Type: Floor Guide
  • Color: Black
  • Finish: Antique Black
  • Item Length: 4.8 in
  • Brand: Winsoon
  • Suitable For: Barn Door
DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Stainless Steel Top Mounted Bi-Parting Sliding Barn Closet Cabinet Wood Door Track Hardware Kit. Material:Stainless steel 304. Suitable for door thickness:1 3/8″2″. U shaped track&wall connector’s location is adjustable, it make this design suitable for all studs wall. 5FT/5.5FT Full set hardware includes. 5ft/5.5ft track with end caps. U shaped track&wall connector4. Roller’s height is 4 5/8. Top mount roller can work with door panel thickness :1 3/8″2″. The gap between door and wall is 7/8. No need drill holes on the track, easy for installation. 6ft/6.6ft single door kit including:roller2;stopper2;6ft/6.6ft track1;track&wall connector5;floor guide1. The item “DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware” is in sale since Thursday, July 18, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Model: MM10Y Kit
  • Country/Region of Manufacture: China
  • Item Height: 4 5/8 in
  • Item Width: 1 3/16 in
  • Material: Stainless Steel
  • Type: Sliding Door Track
  • Color: Silver
  • Finish: Brushed
  • Item Length: 13 ft
  • Brand: DIYHD
  • Suitable For: Barn Door
  • Item Diameter: 3 cm