Sliding Door Hardware
DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

The height from top of the door to the top of the roller is 130mm(5 3/25″), please at least 150mm(6″) for installation. The gap between door and wall is 16mm(16/25″) based on door thickness 40mm(1 4/7″). Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/10″. 5FT/5.5FT Full set hardware including. 5FT(150m)/5.5FT(1.7m) track:1pcs. 6FT/6.6FT Soft Close Kit Including. Not including other hardware. 5FT track is one piece track and pre-drilled 16 apart holes. Can be used for studs wall that length between two studs are 16. 5FT track kit can be used for door width up to 30. The T trigger may not hit with plastic soft close piece we pre-fixed on the track! Easy installation for non wooden frame around openning. If baseboard/wooden frame thickness less than 3/5, easy installation as photo 1 left side. If baseboard/wood frame thickness more than 3/5, please add a thick gasket or wooden board on the back side of the track as photo 2. How to install barn door hardware. How to install barn door hardware: Step1: Drill holes on the wall H is door panel’s height, H+45MM(1.77) is the place we need drill holes for track to tight screws. Step2: Adjust the soft close mechanism’s location to make two teeth visiable from the front side of the track(see step 7 on the photo manuel), then tight the track on the wall Step3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4: The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5: Hang wheels on the track. Step6: Install floor guide on the floor under the groove of the door panel Step7: Move two soft close mechanism’s teeth like option 1 Close the door, tight the T trigger on the bottom of the mechanism’s teeth. Open the door, tight the T trigger on the bottom of the mechanism’s teeth. Step8: Mount two stops of the two end of the track. The item “DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism” is in sale since Monday, October 8, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream,IL. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: STEEL
  • Type: Sliding Door Track
  • Brand: DIYHD
DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

The height from top of the door to the top of the roller is 130mm(5 3/25″), please at least 150mm(6″) for installation. The gap between door and wall is 16mm(16/25″) based on door thickness 40mm(1 4/7″). Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/10″. 5FT/5.5FT Full set hardware including. 5FT(150m)/5.5FT(1.7m) track:1pcs. 6FT/6.6FT Soft Close Kit Including. Not including other hardware. 5FT track is one piece track and pre-drilled 16 apart holes. Can be used for studs wall that length between two studs are 16. 5FT track kit can be used for door width up to 30. The T trigger may not hit with plastic soft close piece we pre-fixed on the track! Easy installation for non wooden frame around openning. If baseboard/wooden frame thickness less than 3/5, easy installation as photo 1 left side. If baseboard/wood frame thickness more than 3/5, please add a thick gasket or wooden board on the back side of the track as photo 2. How to install barn door hardware. How to install barn door hardware: Step1: Drill holes on the wall H is door panel’s height, H+45MM(1.77) is the place we need drill holes for track to tight screws. Step2: Adjust the soft close mechanism’s location to make two teeth visiable from the front side of the track(see step 7 on the photo manuel), then tight the track on the wall Step3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4: The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5: Hang wheels on the track. Step6: Install floor guide on the floor under the groove of the door panel Step7: Move two soft close mechanism’s teeth like option 1 Close the door, tight the T trigger on the bottom of the mechanism’s teeth. Open the door, tight the T trigger on the bottom of the mechanism’s teeth. Step8: Mount two stops of the two end of the track. The item “DIYHD Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism” is in sale since Monday, October 8, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Carol Stream,IL. This item can be shipped to United States.
  • Material: STEEL
  • Brand: DIYHD
  • Type: Sliding Door Track
  • Country/Region of Manufacture: China
American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism

5FT-16FT Soft Close J Shape Hangers Sliding Barn Wood Door Hardware Track Kit (1.5m-4.88m). Soft Close Mechanism: Let the door close slowly and prevent the injury and reduce the noise(Single Door Get 1, Double DoorS Get 2). Surface: Black Frosted, Corrosion Protection. Main Material: High Quality Carbon Steel. Track and Roller Arm Thickness: 6 mm. Used For: 5ft-16ft Single/Double doors system (Door panel is not included). Door Stopper: Keep rollers on track; Advanced spring design, no noise. Junction plate(Connector): Mount track to wall; docking non-trace, artistic. Steel Hangers (Rollers): 2 x rollers use for one door. Floor Guide: Keep door in its position. Anti-Jump Pad: Prevent door from falling down. The sliding rail: long hole design, easy to install. Roller bearing: High purity bearing steel Gcr15, wear-resisting, ensure the stability of the move and the wheel’s fluency. Passed the test of opening – closing: 100000 times. Customers will be offered screws fit for wooden wall and concrete wall. Track length should be twice of your door panels with, please select the length based on the door panel or opening. Door weight capacity: 150 lb – 260 lb. Door panel thickness: 35/45 mm. 5 FT-16 FT Track fit for door opening: 30 inch – 96 inch. The gap between THK 40 mm door panel and the wall is about 16 mm, height from the top of the door panel to the top of the roller is about 150 mm for reference. Only the hardware is for sale. Door is not included. Thank you very much. The item “American Style Sliding Barn Door Hardware Rollers Track Kit Soft Close Mechanism” is in sale since Friday, July 28, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “hahaemall” and is located in CA. This item can be shipped worldwide.
  • Door Type: Interior
  • Featured Refinements: Barn Door Hardware With Soft Close
  • Color: Matte Black
  • Fit Door Thickness: 35-45mm / 1.38″-1.77″
  • Bundle Listing: No
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United States
  • Material: High Quality Carbon Steel
  • Brand: HaHaemall
  • Hangers Style: “J” Shape Bent Classic
  • Load-bearing: 260lbs (120kg)
  • Featured: Heavy Duty, Durable
  • Type: Sliding Door Track
Antique Victorian Eastlake Sliding Pocket Door Set with locking mechanism

Antique Victorian Eastlake Sliding Pocket Door Set with locking mechanism

Antique Victorian Eastlake Sliding Pocket Door Set with locking mechanism

Antique Victorian Eastlake Sliding Pocket Door Set with locking mechanism

Antique Victorian Eastlake Sliding Pocket Door Set with locking mechanism

Antique Victorian Eastlake Sliding Pocket Door Set with locking mechanism

Set of Victorian Eastlake Sliding Pocket Door Set. 2 solid recessed pulls that are approx 3 5/8″ x 1 15/16″ &. 2 with opening for key entry. Lock (5 1/2″ high x 2 15/16″ deep) with strike (5 1/2″ x 1 1/6″). Pieces do not adhere to a magnet except for the back part of the lock which adheres to a magnet. Nice set with some great design. Pictures will show you views of this item. The item “Antique Victorian Eastlake Sliding Pocket Door Set with locking mechanism” is in sale since Thursday, June 7, 2018. This item is in the category “Antiques\Architectural & Garden\Hardware\Door Knobs & Handles”. The seller is “member2677910″ and is located in Indian Orchard, Massachusetts. This item can be shipped to United States.