Sliding Door Hardware
Homacer Sliding Barn Door Hardware Single Track Bypass Double Door Kit 6.6 Flat

Homacer Sliding Barn Door Hardware Single Track Bypass Double Door Kit 6.6 Flat

Homacer Sliding Barn Door Hardware Single Track Bypass Double Door Kit 6.6 Flat

Homacer Sliding Barn Door Hardware Single Track Bypass Double Door Kit 6.6 Flat

THIS ITEM IS NEW IN THE ORIGINAL BOX. Homacer Sliding Barn Door Hardware Single Track Bypass Double Door Kit, 6.6 FT Flat Track Classic Design Roller, Black Rustic Heavy Duty Interior Exterior Use. BYPASS OPTION MADE AVAILABLE ON ONE TRACK. It is never an easy job to install a double track bypass kit. Sometimes the clearance you have is not enough, sometimes the gap between the two doors are too large, and sometimes it just feels like frustrated to put all the pieces together. Now, with our single track bypass option, installing a bypass kit has never been easier. You can just follow the steps for a standard double door kit and replace the regular hangers with the bending ones. Ever frustrated that the ordinary bypass hardware taking too much space with its bulky appearance? With the new innovation of our single track bypass system, we design the bypass system to be simplistic at the same time super efficient to use. It only requires 6 inches clearance and if you are short in the room between the top of the door to the ceiling, the single track bypass will be a perfect choice. QUALITY IS 100% UNDER CONTROL. We picked the most premium carbon steel to make the hardware heavy-duty and sturdier than the competition. The black powdered coating makes the paint stays forever and will not be scratched off. The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track. Each complete track can hold door weight up to 200 lbs. BARN DOOR HARDWARE INSTALLATION MADE EASY. I understand it is stressful and time consuming to mount the double track bypass because you have to level the two flat track correctly and complex installation for the bypass doors. Homacer single track bypass allows your beautiful barn doors to slide bypass with each other on JUST ONE TRACK. You will also receive the step by step instructions with fractional measurements concise word instructions with pictures. 4x8x79-23 ZONE 1 up. IMPORTANT INFORMATION: All items are overstocks and box damage from a large online retailer. Some boxes may show some damage, but product is in perfect condition. Please note this if you are planning to give item as a gift. Thanks for looking and good luck!! The item “Homacer Sliding Barn Door Hardware Single Track Bypass Double Door Kit 6.6 Flat” is in sale since Friday, January 17, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “ebabyoutlet” and is located in Freehold, New Jersey. This item can be shipped to United States.
  • Type: Sliding Door Track
  • MPN: YT5TGH079C-6810
  • Brand: Homacer
4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double

4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double. Satisfied Service – 30 Days Free Return. HARDWARE ONLY, DOOR IS NOT INCLUDED. Suitable for master bedroom, bathroom, laundry room, entertainment console, pantry, kitchen etc. Material: High quality stainless steel, wheel material: POM. Track: Diameter 1 (25mm). Door Max Weight Capacity: Up to 330lbs (150kg). Door Thickness: From 1.38″ to 1.57″ (35mm-40mm). HOW TO CHOOSE TRACK SIZE. Hang One Door: track size = 2 × one door panel width Example: If your door panel width is 3ft, Min. Track size is 6ft. Hang Two Doors: track size = 4 × one door panel width Example: If your each door panel width is 3ft, Min. Track size is 12ft. The item “4-16FT Stainless Steel Flat Sliding Barn Door Hardware Closet Kit Single/Double” is in sale since Thursday, August 29, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “boxche5″ and is located in California. This item can be shipped to United States, Canada.
  • MPN: Does Not Apply
  • Brand: CCJH
  • Type: Sliding Door Track
Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door

Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door

Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door

Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door

Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door

Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door

Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door

Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door

Our Black Classic Barn Door Hardware is a study in simplicity. A vision of elegance, the Classic’s steel straps fasten to the face of the door, with the top of the hangers wrapping over the wheels and gliding on a flat steel rail. Classic style is our most popular barn door hardware kit, and it’s easy to see why. It fits right in to modern decor as well as traditional farmhouse style spaces. What’s in the kit. Solid 71 steel rail with powder coated Black Finish. Two Black hangers with Hush wheels. Standoff & extensions for varying door thickness included. All required hex bolts, lag bolts, and nuts. T-Guide for guiding your door. 2-1/2 spacer guide for installing hangers to door. Kit is for hardware only, Door is not included. Hardware is available in a range of exciting colors! In addition to our standard colors (black, oil-rubbed bronze, raw steel, and white), we also offer colorful specialty tones and metallic finishes. Classic barn door hardware kits are machined in Washington State, USA. Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that – the metal is not treated, and it’s intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes. This hardware ships free within the continental United States. If you’re adding a Soft Stop, keep in mind that it’s recommended for interior use only. Soft stops can be used with flat tracks 5′ and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. For a single door, multiply your door width by two to get optimum track length. Example: For a 3′ wide barn door, you’d need a 6′ barn door hardware kit. For bi-parting doors, you’ll need to add the widths together and then multiply that sum by two. Example: For two 3′ wide bi-parting doors, you’ll need a 12′ track. When you are making your selections in the menu, change “quantity of doors on track” to the correct number so we can send you all the hangers and extra hardware you’ll need. For bypassing doors, you’ll need our bypassing kit. If your door requires a track length that falls between sizes, you can round up to the next size and pair with. The adjustable end stop. This will allow you to choose where the door stops on the track. We are also able to cut tracks to your specifications. Listing and template services provided by inkFrog. The item “Classic Flat Track Barn Door Sliding Hardware Kit for 36 wide door” is in sale since Monday, July 8, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Closet & Sliding Door Hardware”. The seller is “realcarriagedoorco” and is located in Gig Harbor, Washington. This item can be shipped to United States.
  • Dimensions: 71″ Track Length
  • Material: Steel
  • Hardware: Barn Door Hardware
  • Brand: Real Sliding Hardware
6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style

6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style

6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style

6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style

6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style

6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style

6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style

6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style

This Georgian style barn door hardware system built from heavy-duty steel with Quality powder-coated finish that will not only offer a reliable, long-lasting performance, but also bring a classical decor to your home. The elegant bracket with 2 rollers hang wood door on a flat track. Wheels provide excellent strength and durability as well as smoothness to travel along the track. Package Includes: (1) 6.6ft one-piece track which is made of steel, provides a smooth and sturdy rolling performance. (5) Spacers, used to keep space between the wall and the track. (1)Roller Hanger, made of steel hanger and nylon wheel with ball bearing makes your door move stably and in low noise. (2) Door Stops, used to adjust and control the rolling distance. (1) Floor Guide, to prevent door from shifting, door bottom groove is required. (2) Anti-jump blocks, prevent hanger wheels from jumping off the track. (1) Hex tools and all hardware fasteners. (1) Easy installation instruction. All parts tested with salt water spray. The length of track should be at least twice of width of door panel. The space between door top and roller top is 7-11/16 inch, Please leave enough space from your ceiling. The recommended gap between door and wall is about (11/16″ to 1-1/16″) which depends on door thickness. Only the hardware is for sale. This Track Kit applies to 36 door. Track can be cut to any length. Before install, Measure your door height, door trim(if available) and bottom groove, Leave appropriate gap for your floor guide. This kit is probably Not for door trim or door casing, otherwise you may need a header(a solid wood board) for enough clearance. Your advice is welcome at any time. The item “6.6ft 1 Rail Black Steel Sliding Barn Door Hardware Flat Track Kit Georgia Style” is in sale since Friday, August 10, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “barndoorfactorydirect” and is located in Plainfield, Indiana. This item can be shipped to United States.
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Material: Steel
  • Featured Refinements: Sliding Barn Door Hardware
  • Bundle Listing: No
  • Type: Sliding Door Track
  • MPN: TY-TTC02BK-B-2-a
  • Brand: JUBEST
  • Non-Domestic Product: No
Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set

Premium Material-We have changed the materials for our floor guides and stoppers. The floor guide and the stopper we include are made out of steel. Easy To Install-Detailed installation manual included. You will find out it is not so hard to build up the sliding barn door hardware by yourself. Hardware works with doors of 1-1/4″ to 1-3/4″ Thickness. Door weight capacity: 150-200 Ibs each door. The hardware kit is for two door panel can be used with two 30 width doors. The space you need from the top of the door to the ceiling should be greater than 15cm/6 inches Only the hardware kit is for sale. Door panel is not included. Customer will be offered wooden wall screws and concrete wall screws. Full set kit suitable for door panel thickness: 35-45mm The gap between THK 40mm door panel and the wall is about 16mm form the top of the door. In the modern home improvement, barn door hardware is commonly used in the decorating of kitchen, bathroom and other areas with high utilization rate. Barn door is sliding over the surface of wall, it can save more space than ordinary doors did. The item “Black Flat Roller Bypass Sliding Roller Barn Double Door Hardware Track Kit Set” is in sale since Tuesday, March 21, 2017. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “trackmax_in” and is located in Hayward, California. This item can be shipped worldwide.
  • Brand: TL
  • Type: Sliding Door Track
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United States
Vintage flat Wheel single Sliding Barn Wood Door Hardware Track 4 12 ft

Vintage flat Wheel single Sliding Barn Wood Door Hardware Track 4 12 ft

Vintage flat Wheel single Sliding Barn Wood Door Hardware Track 4 12 ft

Vintage flat Wheel single Sliding Barn Wood Door Hardware Track 4 12 ft

Vintage flat Wheel single Sliding Barn Wood Door Hardware Track 4 12 ft

Vintage flat Wheel single Sliding Barn Wood Door Hardware Track 4 12 ft

Vintage flat Wheel single Sliding Barn Wood Door Hardware Track 4 12 ft

MADE IN THE USA!!! This beautiful hardware will be a great addition to your home, made out of mild steel, it is sturdy and durable, it will be exactly what you need for your home project. Tracks are NOT pre-drilled. This barn door hardware includes. 2- Hangers which consist of 6″ pulleys/wheels and strap 15 1/2″ x 2. 1- Sliding track of desired length. 1- Hex lag screw for each Ft of track ordered. 1- Spacer / stand off for each Ft of track ordered. 4- bolts for door attachment. 1- connector piece for any track longer than 7 ft. Minimum clearance required above door for the instillation of this hardware is 9. Max weight capacity for each set of wheels (one door) is 250 lbs, estimate the track will hold up to 400 lbs if installed correctly into studs. The item “Vintage flat Wheel single Sliding Barn Wood Door Hardware Track 4 12 ft” is in sale since Wednesday, September 26, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “veym2413″ and is located in Salt Lake City, Utah. This item can be shipped to United States.
  • Material: 100 % STEEL
  • Brand: aba hardware
  • Type: Sliding Door Track
  • Country/Region of Manufacture: United States
  • Featured Refinements: Barn Door Track
DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware

DIYHD Ceiling Mount Sliding Barn Door Hardware. Only Hardware For Sale, Door Panel is NOT included. Pictures provided for visual reference only: actual product may vary. Please check full set hardware information below. Hardware Material:Stainless steel 304;Plastic. 6FT/6.6FT Full set hardware including. Small gap(1/5)between door and ceiling. Small gap(1/2)between door and wall. Door panel’s height=Ceiling height – 5/9. Add a wooden board under the ceiling if door panel not high enough. Suitable for door thickness:1 3/8″1 3/4″. 2 roller can bear MAX weight 180lbs. 8FT Double Door Kit Including. 13FT Double Door Kit Including. 2pcs roller kit including. Flat roller2, floor guide1. The item “DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Track Hardware” is in sale since Thursday, October 25, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “beileli_0″ and is located in Wenzhou. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: STEEL
  • Brand: DIYHD
  • Type: Sliding Door Track
DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit

DIYHD Ceiling Mount Sliding Barn Door Hardware. Only Hardware For Sale, Door Panel is NOT included. Pictures provided for visual reference only: actual product may vary. Please check full set hardware information below. Hardware Material:Stainless steel 304;Plastic. 8FT Single kit hardware including. Small gap(1/5)between door and ceiling. Small gap(1/2)between door and wall. Door panel’s height=Ceiling height – 5/9. Add a wooden board under the ceiling if door panel not high enough. Suitable for door thickness:1 3/8″1 3/4″. 2 roller can bear MAX weight 180lbs. The item “DIYHD Stainless Steel Flat Roller Ceiling Mount Sliding Barn Door Hardware Kit” is in sale since Friday, December 14, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Wenzhou. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: Stainless Steel
  • Type: Sliding Door Track
  • Brand: DIYHD