Sliding Door Hardware
Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware

Hardware Only, Not Including Door Panel. 5FT/5.5FT/6FT/6.6FT are 1pcs track. 8FT/10FT are 2pcs short track with a connector. DIYHD Brushed Nickel Steel Bypass Double Sliding barn Door Hardware One Piece Easy Mount Bypass Bracket. Pre-drilled 16 apart holes. Track’s two ends had pre-drill holes to combine two track together to create longer track. Easy installation for non wooden frame around opening. If baseboard/wood frame thickness more than 3/5 or pre-drilled holes do not line up with studs, please add a wooden board on the back side of the track. Full set hardware including. Track2pcs + Track&Wall Spacer1 set + Bypass bracket1 set. Bypass system require high space(at least 10) from top of the door to the ceiling, pls check your openning space before order. The gap between two doors are 2″ based on the door thickness40mm(1 3/5″) , we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than openning(openning/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/10″;Height 1″) , pls let your door maker finish this job when you order the door. How to install bypass bracket. How to install barn door hardware: Step1:(Inner door) Drill holes on the wall H is door panel’s height, H+43MM(1-7/10) is the place we need drill holes for track to tight screws. Step2: Adjust stop’s location, then tight the track on the wall with spacers. Step3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step4: The round dics are anti-pad, they can reduce the gap betweem door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step5: Hang wheels on the track. Step6: Bypass bracket’s waist-shaped hole is on same leve as inner track, so aim the waist hole at inner track’s hole to find 2 upper holes location on the wall. Drill holes on the wall, and tight screws. Step7:Fix outter track on the bypass bracket with spacers. Step8:Hang outter door on the track and tight anti-pad Step9: Install floor guide on the floor under the groove of the door panel. The item “Brushed Nickel Steel Easy Mount Bypass Bracket Double Sliding barn Door Hardware” is in sale since Wednesday, March 18, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: Stainless Steel
  • Type: Sliding Door Track
  • Brand: DIYHD
DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware

Concentric Circle Roller Ceiling Mount Sliding Barn Door Hardware. Only hardware for sale, Door panel is not included. Material:Stainless steel 304. Full set hardware including. How ceiling mount barn door hardware work. Add 2 rollers to creat twin roller system. Suitable for door thickness 1 3/8″1 3/4″(35mm-45mm). Two rollers can bear max weight 90kgs. Door height= ceiling height minus 9/16(14mm). The ceiling bracket inner center hole to the wall length is 2-3/8(60mm). Drill holes on the door panelthe length between center hole and the top of the door panel is 1-9/16(40mm). The item “DIYHD Ceiling mount bracket brushed stainless steel sliding barn door hardware” is in sale since Thursday, July 18, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Wenzhou . This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: Stainless Steel
  • Brand: DIYHD
  • Type: Sliding Door Track
DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware

DIYHD 5FT Brushed Nickel Steel Sliding Barn Wood Hardware for Small Door. Only Hardware for sale, Door panel is NOT included. 5FT track length is 59inch, pre-drilled 16 apart holes on track. The item “DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware” is in sale since Monday, July 29, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: Stainless Steel
  • Type: Sliding Door Track
  • Brand: DIYHD
10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit

DIYHD 10FT Brushed Nickel Steel Bypass Double Sliding barn Door Hardware One Piece Easy Mount Bypass Bracket. Hardware Only, Not Including Door Panel. Fit door thickness:13/8″1 3/4″. 2 rollers can hold 1 door MAX weight 198lbs. Pre-drilled 16 apart holes. Track’s two ends had pre-drill holes to combine two track together to create 10ft 2 door bypass system. Easy installation for non wooden frame around opening. If baseboard/wood frame thickness more than 3/5 or pre-drilled holes do not line up with studs, please add a wooden board on the back side of the track. Full set hardware including. 5FT Track4pcs + Track connector2+Track&Wall Connector16+ Bypass bracket8. Bypass system require high space(at least 10) from top of the door to the ceiling, pleases check your opening space before order. The gap between two doors are 2″ based on the door thickness 40mm(1 3/5″) , we don’t have better way to reduce this gap. Customers can use thickness 45mm(1 3/4) door panel to reduce a little. Our suggestion is to make door panel more wider than opening(opening/2+4) to cover the sight between two door’s gap. Track had been pre-drilled 16″ apart holes, can be used for 16″ apart studs wall. The bypass system need drill 3 line holes on the wall. It’s very important to double check the level to make all of them in same height. Door panel need to pre-cut a groove(Width 3/10″;Height 1″) , pleases let your door maker finish this job when you order the door. How to install bypass bracket. How to install barn door hardware: Step 1:(Inner door) Drill holes on the wall H is door panel’s height, H+43MM(1-7/10) is the place we need drill holes for track to tight screws. Step 2: Adjust stop’s location, then tight the track on the wall with spacers. Step 3: Drill holes on the door panel (see photo manuel step 3) and fix the wheels. Step 4: The round dics are anti-pad, they can reduce the gap between door and track in case wheels jump off, pls definitely use them(any place on the top of the door and under the track) Step 5: Hang wheels on the track. Step 6: Bypass bracket’s waist-shaped hole is on same leve as inner track, so aim the waist hole at inner track’s hole to find 2 upper holes location on the wall. Drill holes on the wall, and tight screws. Step 7:Fix outter track on the bypass bracket with spacers. Step 8:Hang outter door on the track and tight anti-pad Step 9: Install floor guide on the floor under the groove of the door panel. The item “10FT Brushed Nickel Steel Bypass Double Sliding barn Door Track Hardware Kit” is in sale since Thursday, September 5, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “shengyinhardware” and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: Stainless Steel
  • Type: Bypass Hardware
  • MPN: BN04-10FT 2 Doors Bypass
  • Brand: DIYHD
Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy. Welcome to Slidingbarn doors! 5 FT Single Door kit. Fit Door Width up to 30”;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 220lbs. Package List — (1)5ft Track, (4)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (2)Anti Pad. 6 FT Single Door kit. Fit Door Width up to 36”;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 220lbs. Package List — (1)6ft Track, (5)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (2)Anti Pad. 6.6 FT Single Door kit. Fit Door Width up to 40”;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 220lbs. Package List — (1)6.6ft Track, (5)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (2)Anti Pad. 8 FT Single Door kit. Fit Door Width up to 48”;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 220lbs. Package List — (1)8ft Track, (6)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (2)Anti Pad. 10 FT Single Door kit. Fit up to Double 30” Door;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 360lbs. Package List — (2)5ft Track, (8)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (1)Anti Pad, (1) track connector, DOOR NOT INCLUDED. 12 FT Single Door kit. Fit up to 72″ Wide Door;Fit Door Thickness 1-3/8″ 1-3/4(3545mm);Door Weight Capacity 250lbs. Package Listing — (2)6ft one piecce Rail, (9) Wall Hangers, (2) Rollers , (2) Door Stops, (1) Floor Guide, (2)Anti Pad, DOOR NOT INCLUDED. 8 FT Double Door kit. Fit up to Double 24” Door;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 250lbs. Package List — (1)8ft Track, (6)Wall Hangers, (4)Rollers , (4)Door Stops, (2)Floor Guide, (4)Anti Pad. 10 FT Double Door kit. Package List — (2)5ft Track, (8)Wall Hangers, (4)Rollers , (4)Door Stops, (2)Floor Guide, (2)Anti Pad, (1) track connector, DOOR NOT INCLUDED. 12 FT Double Door kit. Fit up to Double 36” Door;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 360lbs. Package List — (2)6ft Track, (9)Wall Hangers, (4)Rollers , (4)Door Stops, (2)Floor Guide, (2)Anti Pad, DOOR NOT INCLUDED. Get images that make Supersized seem small. Tailor your auctions with Auctiva’s. The item “Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Ultra Hard Sturdy” is in sale since Tuesday, April 28, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “slidingbarndoor” and is located in Los Angeles, California. This item can be shipped to United States.
  • Brand: Unbranded
Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly

Heavy Duty Construction & Security Assurance — Brand New, High Quality Steel, Nickle Brushed Surface ensures anti-corrosion and years of beauty and longevity. Stylish appearance, Ultra hard sturdy for maximum efficiency. Put Safety & Quality in first consideration when design. Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly. Brand New, High Quality Steel, Nickle Brushed Surface ensures anti-corrosion and years of beauty and longevity. Tested Beyond 100,000 Rolls, slide smoothly and quietly, ultra hard sturdy for maximum efficiency, all items have been multiple inspected before on market. 5 FT Single Door kit. Fit Door Width up to 30”;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 220lbs. Package List — (1)5ft Track, (4)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (2)Anti Pad. 6 FT Single Door kit. Fit Door Width up to 36”;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 220lbs. Package List — (1)6ft Track, (5)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (2)Anti Pad. 6.6 FT Single Door kit. Fit Door Width up to 40”;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 220lbs. Package List — (1)6.6ft Track, (5)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (2)Anti Pad. 8 FT Single Door kit. Fit Door Width up to 48”;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 220lbs. Package List — (1)8ft Track, (6)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (2)Anti Pad. 10 FT Single Door kit. Fit up to Double 30” Door;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 360lbs. Package List — (2)5ft Track, (8)Wall Hangers, (2)Rollers , (2)Door Stops, (1)Floor Guide, (1)Anti Pad, (1) track connector, DOOR NOT INCLUDED. 12 FT Single Door kit. Fit up to 72″ Wide Door;Fit Door Thickness 1-3/8″ 1-3/4(3545mm);Door Weight Capacity 250lbs. Package Listing — (2)6ft one piecce Rail, (9) Wall Hangers, (2) Rollers , (2) Door Stops, (1) Floor Guide, (2)Anti Pad, DOOR NOT INCLUDED. 8 FT Double Door kit. Fit up to Double 24” Door;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 250lbs. Package List — (1)8ft Track, (6)Wall Hangers, (4)Rollers , (4)Door Stops, (2)Floor Guide, (4)Anti Pad. 10 FT Double Door kit. Package List — (2)5ft Track, (8)Wall Hangers, (4)Rollers , (4)Door Stops, (2)Floor Guide, (2)Anti Pad, (1) track connector, DOOR NOT INCLUDED. 12 FT Double Door kit. Fit up to Double 36” Door;Fit Door Thickness 1-3/8″1-3/4″(3545mm);Door Weight Capacity 360lbs. Package List — (2)6ft Track, (9)Wall Hangers, (4)Rollers , (4)Door Stops, (2)Floor Guide, (2)Anti Pad, DOOR NOT INCLUDED. Get images that make Supersized seem small. Tailor your auctions with Auctiva’s. The item “Heavy Duty Brushed Nickel Sliding Barn Door Hardware Track Kit Slide Smoothly” is in sale since Tuesday, April 14, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sungive-hardware” and is located in Los Angeles, California. This item can be shipped to United States.
  • MPN: Does not apply
  • Brand: Unbranded
DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware

Stainless Steel Top Mount Bi-Parting Double Sliding Barn Closet Wood Cabinet Door Track Hardware Kit to Hangl 2 Doors. Material:Stainless steel 304. Suitable for door thickness:1 3/8″2″. U shaped track&wall connector’s location is adjustable, it make this design suitable for all studs wall. Full set hardware includes. 5ft track with end caps2. U shaped track&wall connector8. Roller’s height is 4 5/8. Top mount roller can work with door panel thickness :1 3/8″2″. The gap between door and wall is 7/8. No need drill holes on the track, easy for installation. 6ft/6.6ft track hardware to hang 2 small door panels(suitable for door panel’s width less than 20). Top mount roller plate’s width that set on the top of the door is 1 1/4″, so this item can work with 1 1/4″2 door panels. Wooden board is required for the door panel thicker than 2. Each 2 rollers can hold 1 door MAX weight 198lbs. Full set kit including. 6ft/6.6ft double door kit only offered 2pcs stops install on the 2 ends of the door, so 2 door panels both can slide to the same side. The item “DIYHD Brushed Stainless Steel Top Mount Sliding Barn Closet Door Track Hardware” is in sale since Tuesday, December 18, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Carol Stream, Illinois. This item can be shipped to United States, Australia.
  • Country/Region of Manufacture: China
  • Material: Stainless Steel
  • Brand: DIYHD
  • Type: Sliding Door Track
DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit

DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit

DIYHD 5FT Brushed Nickel Steel Sliding Barn Wood Hardware for Small Door. Only Hardware for sale, Door panel is NOT included. 5FT track length is 59inch, pre-drilled 16 apart holes on track. Q:How much room is needed from top of the door to the ceiling to install the track and roller? A:The height from top of the door to the top of the roller is 5″, please leave at least 6″ for installation. Q:How to deal with if door doesn’t stay open? A:The track installed isn’t level coursed the problem, you can adjust screws up and down the track until it would open/close correctly. Q:What should I do if the pre-drilled holes on the track don’t line up with studs? A:You can add a woodboard on the place where install track. The item “DIYHD Brushed Nickel Steel Sliding Barn Wood Door Track Hardware Kit” is in sale since Wednesday, October 31, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “beileli_0″ and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: STEEL
  • Brand: DIYHD
  • Type: Sliding Door Track
DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door

DIYHD 11FT Brushed Nickel Steel Double Sliding Barn Wood Door Hardware for 2 Door. Only Hardware for sale, Door panel is NOT included. 11FT track length is 134 inch, wooden board required for studs wall. Full set hardware including. 67inch track2+Track connector+Track&wall connector8. Wooden board required for studs wall, door handles are not included. 2pcs anti-pad installed on the top of the door can reduce gap between door and track in case rollers fall off from track, please use them for safety reason. Make sure the length from top of the door to the ceiling is longer than 5-7/8 for installation. Drill holes on the door panel. First center hole to the top of the door:1-9/16. Center length between two holes:3-9/16. Door panel need cut a groove for floor guide. 2pcs rollers and floor guide will be a triangle to keep door panel straight and not swing during sliding. 8ft double kit including. 10ft/11ft double kit including. 12FT/13FT Package’s including. 6FT/6.6FT Sliding track2. Track had been pre-drilled 16 apart holes;13FT is 2pcs 6.6ft track with a track connector. The item “DIYHD Brushed Nickel Steel Double Sliding Barn Door Hardware to Hang 2 Door” is in sale since Monday, September 17, 2018. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “beileli_0″ and is located in Carol Stream, Illinois. This item can be shipped to United States.
  • Country/Region of Manufacture: China
  • Material: STEEL
  • Brand: DIYHD
  • Type: Sliding Door Track
9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel

See our other listings. Surface: Wire drawing technology, manufactured by integral moulding, smooth surface with silver bright, metal luster. Main Material: High quality 304 Stainless steel, high corrosion resistance, sturdy & durable & anti-corrosion. Fit for door panel thickness: 1 3/8″ to 1 3/4″35-45mm. Door Max Weight: 250lbs. The gap between thickness 1-4/7 inch 40 mm door panel and the wall is about 3/5inch (16 mm), The distance from the top of the door to ceiling is about at least 6.3inch (160mm) for reference. Roller bearing: High purity bearing steel Gcr15, wear resistance, stability and fluency. The sliding rail: Precision reserved hole design, easy to install. Floor guide: toughness, good wear resistancevibration-resistance performance. 9FT is length of track not for 9FT door. Track’s length should be twice of your door panel’s width or your opening. Only hardware is for sale. Door is not included. 2×4.5FT Flat Track. Customers’ issues such as: no longer needed, don’t like, bought by mistake, etc. Craftsmanship, excellence and innovation are our primary pursuits. We enjoy the working with raw materials to make them into something extraordinary. Based in Shenyang, China. Winsoon has the natural local advantages of making outstanding sliding hardware track set. The talent and craftwork are the cornerstone of our company. We take pride in everything we produce. We lead the way in sliding barn door hardware, trustful quality and workmanship is what you can expect when you choose Winsoon. Portions of the part information on this page have been provided by winsoon. The item “9FT Modern Top Mounted Single Sliding Barn Door Hardware Tube Kit Brushed Nickel” is in sale since Thursday, December 12, 2019. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “winsoonhardware” and is located in Pomona, California. This item can be shipped to United States.
  • Color: Silver
  • Style: Contemporary
  • Material: Stainless Steel
  • Type: Sliding barn door hardware
  • MPN: Does Not Apply
  • Brand: winsoon