Black barn door hardware. Brushed barn door hardware. The track connector is became thick one piece to make full system easily for installation, pls ignore the round pieces showing in the manuel. Material:stainless steel 304; Surface:satin -Two roller can bear MAX weight 90kg -This item may not suitable for drywall+studs, we had pre-drilled holes on track -Track’s length should be twice of your door’s width(pls select a little bit longger one) -The height from top of the door to the top of the roller is about 120mm, pls leave at least 150mm for installation -The gap between door(thickness 40mm) and wall is about 26mm for reference -The old track&wall connectors are two pieces, one part fix on the tube, the other part mount on the wall and use a screw to tight two parts together, the new goods changed the design and make two parts to be one thicker connector to make the installation much easlier, pls kindly noted the change! Wall mounted rail connector3. Wall mounted rail screws3. 8ft single door kit. Wall mounted rail connector5. Wall mounted rail screws5. 10ft double door kit. Wall mounted rail screws6. Wall mounted rail connector6. 6ft/6.6ft single door kit. Wall mounted rail connector4. Wall mounted rail screws4. 8ft double door kit. 12ft/13ft double door kit. Wall mounted rail screws8. Wall mounted rail connector8. The height from top of the door to the top of the roller is 130mm(5 3/25″), please at least 150mm(6″) for installation The gap between door and wall is 16mm(16/25″) based on door thickness 40mm(1 4/7″) Door panel need to be cut a groove for floor guide, Groove Height:1″Width:3/5″ Step1:Prepare door panel and hardware Door panel pre-cut groove Prepare gasket or wooden board/thick spacer if you have thick frame/baseboard Step2:Drill 16″ apart holes on the wall The height of the place where drill hole is door height +43mm(1 11/16″) Combine two tracks together with connector Double check the level then tight the track on the wall with spacer Step3:Dill holes on the door and tight the roller, than hang door panel on the track Step4:Fix the Anti-pad on the top of the door The anti-pad can reduce the gap between door and track to make full system safety Step5:Install floor guide on the bottom of the door Step6:Install stops on two sides on the track. If you find any missing or damage on the products pls take me outer package photo and demaged products photo ASAP, we will try our best to solve it. 8/10/12ft Industrial Wheel Double Sliding Barn Wood Door Track Hardware. Two side Soft close Barn Door Hardware Big Spoke Wheel Barn Door Track Kit. 8ft Sliding barn door wood door hardware rustic black barn sliding track. White Color Straight Country Style Sliding Barn Wood Door Track Hardware Kit. 8ft Arrow style double sliding barn wood closet door rustic black track hardware. The item “Stainless steel sliding barn wood door hardware top mounted barn hanger track” is in sale since Tuesday, March 01, 2016. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Doors & Door Hardware\Other Door Hardware”. The seller is “sliding-barn-door” and is located in Wenzhou, . This item can be shipped to United States, Australia.

• Brand: DIYHD
• MPN: HSGDTOP
• Country/Region of Manufacture: China
• Color: brushed satin